Table of Contents
Advertisement
Use of the Controls
2.3.4 Drill
Use the
DRILL
To prevent accidental activation, you must press the
control panel does the following:
•
Turns on all silenceable NACs
•
Turns off the
•
Sends a Manual Evacuate message to the History buffer and installed printers, CRT-2
terminals, and FDU-80 annunciators
NOTE: If Local Control is set to "1" (NO) or "2" (Partial Control), the FACP will not respond to
DRILL.
2.3.5 Lamp Test
Use the
LAMP TEST
held, the control panel does the following:
•
Lights all control panel LEDs
•
Turns on the panel sounder
•
Lights all segments of the LCD display. When the
seconds, the LCD will display the Software Revisions.
2.4 Programming Keypad
The programming keypad includes:
•
Function keys:
SELECTION
•
ENTER
•
Cursor movement keys:
•
Alphabetic and numeric keys, with
16
key to manually activate all silenceable outputs and Notification Appliance Circuits.
LED
SIGNALS SILENCED
key to test the control panel LEDs and t he panel sounder. When pressed and
,
DETECTOR
MODULE
,
, and
RECALL LAST ENTRY
key
/
ESC
LEFT ARROW
key for 2 seconds. When pressed, the
DRILL
key is held for longer than five
LAMP TEST
,
,
OUTPUT
BATTERY LEVELS
INCREMENT NUMBER
key,
key,
key,
UP
RIGHT
selection key
LOWER CASE
NFS-320/E/C Operations Manual — P/N 52747:A 12/12/2006
Programming Keypad
,
,
NEXT SELECTION
PREVIOUS
key
DOWN
Advertisement
Table of Contents
