WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
similar accommodation where such use does not exceed (average) domestic usage levels. Only a qualified person must install this appliance and • replace the cable. Do not use the appliance before installing it in the built-in • structure. Disconnect the appliance from the power supply before •...
Page 5
• Before mounting the appliance, check if • Make sure not to cause damage to the the appliance door opens without mains plug and to the mains cable. restraint. Should the mains cable need to be • The appliance is equipped with an electric replaced, this must be carried out by our cooling system.
Page 6
2.3 Use • Always cook with the appliance door closed. • If the appliance is installed behind a WARNING! furniture panel (e.g. a door) make sure the Risk of injury, burns and electric door is never closed when the appliance shock or explosion.
2.7 Service the appliance. • To repair the appliance contact the Authorised Service Centre. 3. INSTALLATION 3.1 Building in WARNING! Refer to Safety chapters. www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux Oven - Column installation (*mm) min. 550 min. 560 ENGLISH...
Page 8
(*mm) min. 550 min. 560 3.2 Securing the oven to the cabinet ENGLISH...
4. PRODUCT DESCRIPTION 4.1 General overview Control panel Knob for the heating functions Display Control knob (for the temperature) Water drawer Heating element Socket for the food sensor Lamp Cavity embossment - Aqua cleaning container Shelf support, removable Draining pipe Water outlet valve Shelf positions Steam inlet...
To check the oven temperature or the temperature of the core temperature sensor (if applicable). Use only while a heating function operates. 5.3 Display A. Timer / Temperature B. Heat-up and residual heat indicator C. Water drawer D. Food Sensor (selected models only) E.
Page 11
Wait for at least 60 minutes after each use of the steam function to prevent hot water from Step 2 Turn the control knob to select the tem‐ exiting the water outlet valve. perature. Step 3 When the cooking ends, turn the knobs CAUTION! to the off position to turn off the oven.
Page 12
Heating func‐ Application tion To bake and roast food on one shelf position. Refer to "Care and cleaning" Conventional chapter for more information Cooking / Aqua about: Aqua Clean. Clean To bake cakes with crispy bot‐ tom and to preserve food. Bottom Heat To defrost food (vegetables and fruit).
When you use this function the lamp general energy saving recommendations automatically turns off after 30 sec. refer to "Energy Efficiency" chapter, Energy Saving. For the cooking instructions refer to "Hints and tips" chapter, Moist Fan Baking. For 8. CLOCK FUNCTIONS 8.1 Clock functions table Clock function Application...
Page 14
Step 2 - press repeatedly. - starts to flash. Step 3 Turn the control knob to set the minutes. - press to confirm. Step 4 Turn the knob for the temperature to set the hour. - press to confirm. When the set time ends the signal sounds for 2 min. Time setting flashes in the display. The oven turns off automatically.
Step 7 Press any button to stop the signal. Step 8 Turn the knobs to the off position. 8.6 How to set function: Minute Minder Minute minder can be both set when the oven is turned on and off. Step 1 - press repeatedly.
Page 16
flashes in the display. When the calculation 4. Press to save the new core ends, the display shows the duration of the temperature, or wait 10 seconds for the cooking. Calculations run in the background setting to be saved automatically. during the cooking and the duration value in The new default core temperature is the display is updated if necessary.
Page 17
Baking tray / Deep pan: Push the tray between the guide bars of the shelf support. Wire shelf, Baking tray / Deep pan: Push the tray between the guide bars of the shelf support and the wire shelf on the guide bars above.
Page 18
Glass bowl (A) Lid (B) Injector, injector tube, and a steel grill. Injector tube (C) is for steam cooking, injector (D) is for direct steam cooking. Steel grill (E) • Do not put the hot baking dish on cold / •...
9.6 Direct steam cooking Put the baking dish on the steel grill. Add some water. Do not use the lid. WARNING! The injector may be hot when oven operates. Always use oven gloves. Remove the injector from the oven when you do not use steam function. Step 1 Connect injector with injector tube.
10.6 Safety thermostat The Automatic switch-off does not work with the functions: Light, Food Sensor, Duration, Incorrect operation of the oven or defective End Time. components can cause dangerous overheating. To prevent this, the oven has a 10.5 Cooling fan safety thermostat which interrupts the power When the appliance operates, the cooling fan supply.
Page 21
11.3 Moist Fan Baking For the best results follow suggestions listed in the table below. (°C) (min) Sweet rolls, 16 pieces baking tray or dripping pan 20 - 30 Rolls, 9 pieces baking tray or dripping pan 30 - 40 Pizza, frozen, 0.35 kg wire shelf 10 - 15...
Page 22
(°C) (min) Small Conventional Baking tray 20 - 30 cakes, 20 Cooking per tray Small True Fan Baking tray 150 - 160 20 - 35 cakes, 20 Cooking per tray Small True Fan Baking tray 2 and 4 150 - 160 20 - 35 cakes, 20 Cooking...
12. CARE AND CLEANING WARNING! Refer to Safety chapters. 12.1 Notes on cleaning Clean the front of the appliance with a microfibre cloth with warm water and a mild detergent. Clean and check the door gasket around the frame of the cavity. Use a cleaning solution to clean metal surfaces.
Page 24
12.3 How to use: Aqua Clean Step 4 Let the oven work for 30 min. This cleaning procedure uses humidity to remove remaining fat and food particles from Step 5 Turn off the oven. the oven. Step 6 Wait until the oven is cold. Dry the cavi‐ ty with a soft cloth.
Page 25
12.5 How to remove and install: Door The oven door has three glass panels. You can remove the oven door and the internal glass panels to clean them. Read the whole "Removing and installing door" instruction before you remove the glass panels. CAUTION! Do not use the oven without the glass panels.
Page 26
Step 7 Hold the door glass panels by their top edge and carefully pull them out one by one. Start from the top panel. Make sure the glass slides out of the supports completely. Step 8 Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass panels in the dishwasher.
Back lamp Step 1 Turn the glass cover to remove it. Step 2 Clean the glass cover. Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp. Step 4 Install the glass cover. 13. TROUBLESHOOTING WARNING! Error codes Refer to Safety chapters.
Do not remove the rating plate from the appliance cavity. We recommend that you write the data here: Model (MOD.) ......... Product number (PNC) ......... Serial number (S.N.) ......... 14. ENERGY EFFICIENCY 14.1 Product Information and Product Information Sheet* Supplier's name Electrolux EOC6H71X 949494467 Model identification EOC6H71Z 949494470 ENGLISH...
Page 29
Heat source Electricity Volume 72 l Type of oven Built-In Oven EOC6H71X 34.0 kg Mass EOC6H71Z 31.8 kg * For European Union according to EU Regulations 65/2014 and 66/2014. For Republic of Belarus according to STB 2478-2017, Appendix G; STB 2477-2017, Annexes A and B.
When you use this function the lamp turn on the lamp again but this action will automatically turns off after 30 sec. You may reduce the expected energy savings. 15. ENVIRONMENTAL CONCERNS appliances marked with the symbol with Recycle materials with the symbol .