Page 1
Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. Depending upon model / Según el modelo / Selon le modèle www.lg.com Printed in Korea / Imprimé en Corée...
Page 2
ENGLISH Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. FRANÇAIS Lisez Sécurité...
Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •...
Warning! Safety instructions - Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. - Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, CAUTION combustion/ explosion, malfunction or product RISK OF ELECTRIC SHOCK deformation.
Page 14
• Use only an authorized attachments / accessories - TV with a three-prong grounded AC plug must be approved by LG Electronics. Otherwise, this may connected to a three-prong grounded AC outlet. result in fire, electric shock, malfunction, or product Ensure that you connect the earth ground wire to damage.
Preparing • Batteries - Store the accessories (battery, etc.) in a safe location out of the reach of children. • When the TV is turned on for the first time after - Do not short circuit, disassemble, or allow the being shipped from the factory, initialization of the batteries to overheat.
- Use the ferrite core to reduce the electromagnetic interference in the power cord. Wind the power cord on the ferrite core once. [TV side] [Wall side] Model 24LN572MBUB 28LN572MBUB VESA (A x B) 75 x 75 100 x 100 10 cm (3.9 inches) Standard screw (+ / -2 cm(0.7 inches))
Using the Kensington Security • Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, System (optional) or speaker grille area. (Depending upon model) The Kensington security system connector is located at the rear of the TV.
Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the...
Connections • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. (Depending upon You can connect various external devices to the TV. model) For more information on external device’s connection, • For more information of screws and wall refer to the manual provided with each device.
Other connections Pillow Speaker Connect your TV to external devices. For the best Connect the pillow speaker (see example below) picture and audio quality, connect the external device to the PILLOW SPEAKER interface on the rear jack and the TV with the HDMI cable. panel of the TV.
Page 21
External Speakers Method of volume control port (Depending upon model) (Depending upon model) • Cable Spec. Each up/down pins are connected to CPU with pull up EXTERNAL resistor respectively. SPEAKER OUT GND / UP / DOWN SPEAKER OUT LINE OUT CPU detects transition from 3.3 AUDIO...
Using the Button Adjusting the Menu (Depending upon model) When the TV is turned on, press the button one You can simply operate the TV functions, using the time. You can adjust the Menu items using the button. button. Turns the power off. Changes the input source.
TV. Some minute dot performance. The customer is responsible to ensure defects may be visible on the screen, appearing the compatibility of their equipment with any LG as tiny red, green, or blue spots. However, they Electronics software. If needed, please consult with have no adverse effect on the TV’s performance.
Settings • Generated Sound - Cracking noise A cracking noise that occurs when watching or turning off the TV is (Depending upon model) generated by plastic thermal contraction due to * Remote control is not provided. temperature and humidity. This noise is common for products where thermal deformation is required.
Adjusting the Brightness of a Picture (All Settings) [Picture] [Advanced Settings] [Brightness] Adjust the brightness of the entire screen. • [Panel Brightness] Controls the level of screen brightness by adjusting the backlight. • [Adjust Contrast] Adjusts the contrast of the bright and dark areas of the picture.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). Broadcasting Specifications Television system ATSC, NTSC-M, 64 &...
External Control Device Phone jack Type Setup (Depending upon model) (PC) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. RS-232C Setup * For other models, connect to the USB port. •...
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For Set ID number, see “Real data mapping”.
Command Reference List (Depending upon model) Data Command1 Command2 (Hexadecimal) 1 Power 00 to 01 2 Aspect Ratio (page 24) 3 Screen Mute (page 25) 4 Volume Mute 00 to 01 5 Volume Control 00 to 64 6 Contrast 00 to 64 7 Brightness 00 to 64 8 Color...
Transmission / Receiving Protocol 1 Power (Command: k a) ► To control Power On/Off of the set. (Depending upon Model) Transmission Transmission (k)(a)( )(Set ID)( )(Data)(Cr) (Command1)(Command2)( )(Set ID)( )(Data)(Cr) Data 00: Off Data 01: On (Command1): First command to control the TV. (j, k, m or x) (Command2): Second command to control the TV.
Page 33
3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission (k)(d)( )(Set ID)( )(Data)(Cr) (k)(g)( )(Set ID)( )(Data)(Cr) Data 00: Screen mute off (Picture on) / Video mute off Data Min: 00 to Max: 64 Data 01: Screen mute on (Picture off)
Page 34
9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ► To adjust the screen tint. ► To lock the front panel controls on the monitor and You can also adjust tint in the picture settings. remote control. Transmission Transmission (k)(m)( )(Set ID)( )(Data)(Cr)
Page 35
15 Energy Saving (Command: j q) 17 Equalizer (Command: j v) ► To reduce the power consumption of the TV. You ► To adjust equalizer. can also adjust Energy Saving in picture settings. Transmission Transmission (j)(v)( )(Set ID)( )(Data)(Cr) (j)(q)( )(Set ID)( )(Data)(Cr) Power Saving Level Function...
Page 36
18 Tune Command (Command: m a) 19 Channel Skip / Add (Command: m b) ► Select channel to following physical number. ► To set skip status for the current Channel. Transmission Transmission (m)(a)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Cr) (m)(b)( )(Set ID)( )(Data)(Cr) Data 00: High channel data Data 00: Skip...
Page 37
22 Input select (Command: x b) (Main Picture 23 Channel block/unblock (Command: m d) Input) ► This command may work differently depending ► To select input source for main picture. upon model and signal. Transmission (For South Korea, North/Latin America except (x)(b)( )(Set ID)( )(Data)(Cr) Colombia Model) Data Structure...
Page 38
24 Fail Over Mode (Command: m i) (For all other regions including Colombia, Excluding the above countries) ► Selects the Fail Over mode. Transmission Transmission (m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02) (m)(i)( )(Set ID)( )(Data)(Cr) (Data 03)(Data 04)(Cr) Data 00: Off (Data 00): Physical Channel Number Data 01: Auto...
Page 39
26 Internal storage media contents play * Real data mapping (Command: s n, a8) Step 0 ► Plays media stored in the internal memory. ► This command may work differently depending Step 10 (Set ID 10) upon model and signal. Transmission Step 15 (Set ID 15) (s)(n)( )(Set ID)( )(a)(8)( )(Data)(Cr)
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.
Dolby Laboratories Licensing Corporation. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Page 42
Regulatory FCC Radio Frequency Interference Requirements (for UNII devices) (For USA) FCC Notice High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. (For USA) These radar stations can cause interference with and/ This equipment has been tested and found to or damage this device.
Page 43
Industry Canada Statement RSS-247 Requirement (For Canada) (For Canada) [For having wireless function (WLAN, Bluetooth,...)] [For product having the wireless function using 5 GHz frequency bands] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and (1) The device for operation in the band 5150–5250 Economic Development Canada’s licence-exempt MHz is only for indoor use to reduce the potential for RSS(s).
Page 44
Refers to dangerous voltage. WARNING! (STABILITY HAZARD) A television set may fall, causing serious personal LG Take-back & Recycling Policy injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: – ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
Page 47
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Page 48
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com LG Customer Information Center The model and serial number of the product are located on the back and on one side of the product.