Table of Contents
Advertisement
© Copyright 2018 LG Electronics U.S.A., Inc.
43UV560H
49UV560H
Lodging Guest Interactive Pro:Centric
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
55UV560H
65UV560H
55UV562H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 16 – 25
Custom Master TV Setup
pages 40 – 42
Cloning Procedures
pages 43 – 48
P/N: 206-4326 (Rev B)
®
TVs
Advertisement
Table of Contents
Related Manuals for LG ProCentric 55UV560H
Summary of Contents for LG ProCentric 55UV560H
- Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 16 – 25 Custom Master TV Setup pages 40 – 42 Cloning Procedures pages 43 – 48 P/N: 206-4326 (Rev B) © Copyright 2018 LG Electronics U.S.A., Inc.
-
Page 2: Safety Warnings
• Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, Follow all instructions. - Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.
-
Page 5: Table Of Contents
Table of Contents Cloud Configuration Tool Overview ... . . 49 – 54 Safety Warnings ........2 Important Safety Instructions . -
Page 6: Commercial Mode Overview
This document describes how to set up UV560H/UV562H Pro:Centric TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU or Protocol Translation Controller (PTC), or it resides in a Pro:Centric application or an external device from the solution provider. -
Page 7: Ftg Mode
Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access PTC INSTALLER MENU the commercial controller (PTC) Installer Menu and make changes to xxUV560H the default values as required. If necessary, familiarize yourself with CPU - CTV the Installer Menu and how to make and save changes. - Page 8 • TV Zoning (including channel restrictions by Zone) option for location-specific configurations. LG’s Cloud Configuration Tool enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. Configuration utilities enable you to create/edit an FTG Channel Map and configure Installer Menu settings.
-
Page 9: Application Tuning Mode / Pro:centric Direct
Feature,” for further information. While the TV is in Application Tuning Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • While it is possible to update a TV’s Installer Menu and/or Setup Menu settings locally using a USB memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made... - Page 10 Commercial Mode Overview (Cont.) ASPECT RATIO Aspect Ratio Function Menu TV Setup Menus Sound Out Indicates the TV is not in Shows that the TV is in Aspect Ratio 16:9 Pass-through Mode . While Pass-through Mode . Audio Mode Just Scan the TV is in this mode, Installer Menu settings can General...
-
Page 11: Pro:centric Operation
Pro:Centric Operation These TV models support LG’s Pro:Centric Java application, as well as the Pro:Centric Direct HTML application. Only one application may be implemented at a time. The following sections provide an overview of the application features and functionality. Interactive Menu Features... - Page 12 Pro:Centric Operation (Cont.) Example: Pro:Centric Java Application Portal Example: Pro:Centric Direct HTML Application Portal 206-4326...
-
Page 13: Pro:centric Java Application Setup
Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java application operates in conjunction with FTG and PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide. -
Page 14: Pro:centric Direct Html Application Setup
Pro:Centric Operation (Cont.) TV in FTG Mode If the TV is already in FTG Mode, use the Cloud Configuration Tool to update Installer Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu settings to the TV. - Page 15 Pro:Centric Operation (Cont.) • Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See “Accessing the IP Environment Menu” on page 55 and “Pro:Centric Setup” on pages 57 to 59 for further information.
-
Page 16: Ez-Manager Wizard
EZ-Manager Wizard Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the EZ-Manager Wizard to appear. The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual) of configuring the essential Installer Menu items for Pro:Centric operation. - Page 17 EZ-Manager Wizard (Cont.) Initiate Configuration or Exit the EZ-Manager Wizard The Welcome screen provides a brief introduction to the EZ-Manager Wizard. Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the first configuration step.
-
Page 18: Tv Configuration Options
EZ-Manager Wizard (Cont.) TV Configuration Options From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature on the TV for location-specific configuration purposes, select the “Zone &... - Page 19 EZ-Manager Wizard (Cont.) Note: The Zoning feature is only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). ZONE, LABEL, AND ROOM NUMBER If creating Zones for Installer Menu settings and/or Channel Mapping, TV Zone select the appropriate TV Zone # (0-8) based on the Zone in which <...
-
Page 20: Configure Pro:centric Settings
EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “NEXT” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: Select the “BACK” button, where available, to check previous settings, as necessary. SEARCHING FOR PRO:CENTRIC SERVER... This step automatically searches for the Pro:Centric Server. - Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGUR...
- Page 22 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select MANUAL PRO:CENTRIC at the bottom right of the screen, and then press OK. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.
- Page 23 EZ-Manager Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel.
-
Page 24: Usb Configuration
EZ-Manager Wizard (Cont.) (Continued from previous page) If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric Configuration screen example on page 21). When the Pro:Centric configuration is complete, an EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10 seconds, the wizard exits, and the TV turns OFF. - Page 25 EZ-Manager Wizard (Cont.) USB Configuration via EZ-Manager Wizard With either the TV Configuration Options or the Zone, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device. 1. Insert the USB memory device with the appropriate file(s) into the TV’s USB port. 2.
-
Page 26: Ez Download Utility
Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: •... - Page 27 Ez Download Utility (Cont.) (Continued from previous page) • If the wizard is displayed, you can access the Ez Download utility via the wizard, as indicated above (see “Before You Begin”). However, to continue with this procedure and access the Ez Download utility from the TV menus, exit the EZ-Manager Wizard.
- Page 28 Ez Download Utility (Cont.) (Continued from previous page) 6. If it is not currently selected, use the arrow keys to select Ez Download, and then press OK. As illustrated in the example on the previous page, when Ez Download is selected, a list of files/file types is displayed on the screen.
- Page 29 Ez Download Utility (Cont.) (Continued from previous page) 10. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are resident on the TV. Note: If you updated the TV configuration with a Clone/Configuration file, upon restart, the TV tunes according to the Start Channel setting in the Installer Menu.
-
Page 30: Installer Menu
Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG Configuration (.tlx) file created using LG’s Cloud Configuration Tool. Refer to the table on pages 32 and 33 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. -
Page 31: Navigating Within The Installer Menu
Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU... - Page 32 Installer Menu (Cont.) Installer Menu Items 000 through 069 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
- Page 33 Installer Menu (Cont.) Installer Menu Items 070 through 122 Item Function Value Range Default Value Brief Description of Function FOR. CH-TIME 0 – 7 Chooses custom foreground color for MPI display characters. BCK. CH-TIME 0 – 7 Chooses custom background color for MPI display characters. If set to 1 and item 028 CH.
-
Page 34: Detailed Descriptions Of Installer Menu Items
Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Note: If set to 1, the TV does not respond to ON/OFF commands Specifies entry sequence to the Installer Menu. from either the remote or the display panel, and the Sleep Timer is also nonfunctional. - Page 35 Installer Menu (Cont.) 017 - ALARM NOTE: For items 007, 008, and 009 If set to 1, the Alarm feature is enabled and available to the end For legacy reasons, the scale used is 0 – 63. The PTC software user in the Function Menu (i.e., the TV is not in Pass-through will translate this to the 0 –...
- Page 36 Disabled External Speaker (Optical/HDMI ARC) 041 - SIMPLINK EN Enabled LG Sound Sync (Optical) Set to 0 to disable the SIMPLINK feature. Set to 1 to enable SIMPLINK functionality (does not enable remote control access to Disabled LG Sound Sync (Optical) the SIMPLINK Menu).
- Page 37 Installer Menu (Cont.) 070 - FOR. CH-TIME (Display Characters Foreground Color) 082 - CHKSM ERROR (Checksum Error) Set the foreground color for MPI display characters according to Enforces rigid MPI checksum validation. Set to 1 for validation. the following color chart: Set to 0 to disable (does not check checksum on MPI async port).
- Page 38 Installer Menu (Cont.) 094 - SAP MENU EN (2nd Audio Program) 099 - BACK LIGHTING Set to 1 to enable the SAP feature in the Function Menu (i.e., Sets the TV screen brightness. Default setting is 255. the TV is not in Pass-through Mode). Set to 0 to disable the SAP •...
- Page 39 Installer Menu (Cont.) 117 - FACT DEFAULT (Factory Default) do NOT want the TV to initiate daily update events, set this item to Set to 1 and press OK to restore the factory default settings of all 255. Installer Menu items. Once complete, the value returns to 0. Under standard TV OFF/ON operating conditions (i.e., item 002 AC ON is set to 0), a Wake For Update event occurs when the TV is Caution: If set to 1, this clears all Installer Menu custom...
-
Page 40: Custom Master Tv Setup
Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode. -
Page 41: Custom Master Tv Setup Procedure
Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2. - Page 42 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press MENU PICTURE SETTINGS on the Installer Remote, and select the All Settings Picture menu icon from the Quick Settings Menu to access the advanced TV setup menus.
-
Page 43: Cloning Procedures
Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then use the Import Clone File procedure to transfer the configuration to Target TVs. - Page 44 Cloning Procedures (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s) Update TV Software None...
-
Page 45: Importing A Clone File
Cloning Procedures (Cont.) (Continued from previous page) 9. When you are ready to continue, i.e., when you have selected the desired filename, press OK on the Installer Remote to select/activate the EXPORT button at the bottom of the screen, and then press OK on the Installer Remote once more to export the file. Export progress will be displayed on the screen. - Page 46 Cloning Procedures (Cont.) (Continued from previous page) • If you would like the Target TV(s) to remain in Pass-through Mode or Application Tuning Mode, as applicable, after the Clone/Configuration (.tlx) file is imported, ensure the “.tlx” file does not contain an FTG Channel Map; otherwise, the import procedure will result in the Target TV(s) being configured for FTG Mode.
- Page 47 Cloning Procedures (Cont.) (Continued from previous page) 4. Insert the USB memory device with the Clone/Configuration (.tlx) file into the USB port on the Target TV. 5. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
- Page 48 Cloning Procedures (Cont.) (Continued from previous page) Note: If the “.tlx” file does not include an FTG Channel Map, the message, “No Channel Map in Clone file,” will be displayed at the right of the screen. TV MANAGER Import Clone File USB DEVICE USB 1: Device Name Ez Download...
-
Page 49: Cloud Configuration Tool Overview
Cloud Configuration Tool Overview This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG Mode configuration. For best results, it is recommended that you access the Cloud Configuration ® Tool using one of the following web browsers: Google Chrome™ 51 or later or Mozilla Firefox ... - Page 50 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) • If you are creating an FTG Configuration file from scratch and this is your first time using the Cloud Configuration Tool, you may wish to select the Wizard Setup, which will guide you through the essential steps of creating the file, i.e., creating the FTG Channel Map and/or the Installer Menu profile(s).
- Page 51 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) 3. If you need to edit the FTG Channel Map from an existing file (see previous step) or create a new FTG Channel Map, click on CHANNEL MAP in the menu options bar at the top left of the page to access the Channel Map web page (see example on page 53), and edit/create the FTG Channel Map.
-
Page 52: File Manager Web Page Overview
Cloud Configuration Tool Overview (Cont.) File Manager Web Page Overview The File Manager page (displayed after you select ADVANCED SETUP from the Welcome page) enables you to compile, modify, and save (export) FTG Configuration (.tlx) files. The following example provides an overview reference of the functions available on the File Manager page. Data contained in uploaded FTG Data to be saved in the FTG Configuration (.tlx) file. -
Page 53: Channel Map Web Page Overview
Cloud Configuration Tool Overview (Cont.) Channel Map Web Page Overview On the Channel Map page, you can create, view, and edit a Logical Channel Map. Click the appropriate button to Search for existing channels or add a new RF or IP channel to clear the FTG Channel Map. -
Page 54: Installer Menu Web Page Overview
Cloud Configuration Tool Overview (Cont.) Installer Menu Web Page Overview Load default Installer Menu for selected model. Assign Zone as applicable. Once you click on CREATE (Advanced Setup only) Cloud PROFILE, this Installer Menu profile will be listed under Configuration Tool menu bar the Installer Menu Profile List, and Installer Menu items provides access to all utilities. -
Page 55: Ip Environment Setup
IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV. If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 40 to 42), all IP Environment settings, with the exception of Network Setting configuration, may be cloned. - Page 56 IP Environment Setup (Cont.) (Continued from previous page) 2. With the Network Menu on display, use the arrow keys on the NETWORK SETT... Installer Remote to select Network Setting. Then, press OK. A Network second Network screen (see example at right) will be displayed. Network / By default, the TV uses DHCP, and if a LAN cable is detected, Pro:Centric...
-
Page 57: Pro:centric Setup
IP Environment Setup (Cont.) Pro:Centric Setup Pro:Centric options enable you to configure the TV with the appropriate settings to connect to the Pro:Centric server. Use the Up/Down arrow PRO:CENTRIC keys on the Installer Remote to navigate between fields. Network 1. With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select the Pro:Centric menu option. - Page 58 IP Environment Setup (Cont.) (Continued from previous page) Note: If the Data Channel has already been set in the Installer Menu (Installer Menu item 119) or in the EZ-Manager Wizard, the specified channel will appear in the Data Channel data entry field.
- Page 59 IP Environment Setup (Cont.) (Continued from previous page) • Select/highlight the Update Event field and press OK on the Installer Remote. Then, use the Up/Down arrow keys to select either Enable or Disable from the drop-down list of options. When Update Event is set to “Enable,” an Update Time field is displayed on the screen. •...
- Page 60 Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.
- Page 61 Reference: Updating TV/PTC Software using a USB Memory Device (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also note that Diagnostics is for service use only. 5. Use the Up/Down arrow keys to select Update TV Software or Update PTC Software, as applicable, and then press OK.
-
Page 62: Device
Reference: Downloading a Splash Screen Image using a USB Memory Device This section describes how to download a splash screen image using the TV Manager “Logo Image Download” option, though you may also use the Ez Download utility to download the splash screen image, if desired. - Page 63 Reference: Downloading a Splash Screen Image using a USB Memory Device (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also note that Diagnostics is for service use only. 5. Use the Up/Down arrow keys to select Logo Image Download, and then press OK. TV MANAGER Logo Image Download USB DEVICE...
-
Page 64: Memory Device
Reference: Downloading Background Images using a USB Memory Device Background images are intended for use with audio-only channels. Guests may choose to display a slideshow on the screen (as opposed to a blank screen) while audio is playing. This section describes how to download background images using the TV Manager “Insert Background Image(s)”... - Page 65 Reference: Downloading Background Images using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s)
-
Page 66: Power Consumption Settings
Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 43UV560H 49UV560H 55UV560H/55UV562H 65UV560H Item 099 Back Power Power Power Power Percent Percent Percent Percent Lighting Consumption Consumption Consumption... -
Page 67: Tv Aux Input Configuration
Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DIRECT ACCESS DATA STATUS STATUS TYPE TYPE 0xD2 Tuning Installer Installer Menu TYPE 0x0D 0x41 SOURCES CURRENT AV Menu Item AUX SOURCE (R) ENABLED (R/W) SOURCE (R) 046 START AUX SRCE Installer Installer... -
Page 68: Auto Input(S) Sensing Feature
Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the Aux Inputs Values table on the following page. - Page 69 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.
-
Page 70: Restoring Factory Defaults On The Tv(S)
This section describes how to restore a single TV, regardless of its current mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”... -
Page 71: Using The Tv Zoning Feature
Reference: Using the TV Zoning Feature This section describes the TV Zoning feature available with the UV560H/UV562H model TVs. The TV Zoning feature enables you to create localized configurations for TVs in selected “Zones” within the installation site, for example, a hotel lobby, fitness center, restaurant, etc. This feature is primarily intended for use when the TV is configured for FTG Mode operation. - Page 72 Reference: Using the TV Zoning Feature (Cont.) At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may opt to place Zone restrictions on selected channels in the FTG Channel Map, but at the same time, you can choose to configure all TVs at the site with the same Installer Menu and/or Setup Menu settings.
- Page 73 Reference: Using the TV Zoning Feature (Cont.) (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV. Select/highlight the Label field and press OK. Then, use the Up/Down arrow keys to select the applicable label. Press OK when you are finished.
-
Page 74: Uv560H/Uv562H Rear And Side Jack Panels
Reference: UV560H/UV562H Rear and Side Jack Panels HDMI IN 1 Connection for HDMI/DVI output from external device. Use for network connection OPTICAL DIGITAL AUDIO OUT (i.e., for Pro:Centric data). Use for amps and home theater systems. Note: When the TV is OFF, this port is not enabled. SPEAKER OUT LINE OUT (3.5 mm jack) Connect external audio... -
Page 75: External Stereo Speaker Specifications
Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the UV560H/UV562H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV. -
Page 76: Installer Remote Control Typical Key Functions
Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV. -
Page 77: Tlm Communication Parameters
Reference: TLM Communication Parameters RS-232C Configuration RS-232C IN (CONTROL) Port Pin Configuration RS-232C IN (CONTROL) Pin Number Description DB9 Serial Port on TV 3.5 V RXD (Receive Data) TXD (Transmit Data) IR Out from TV No Connection No Connection No Connection No Connection If your configuring device has a DB9 serial port, use a DB9-Female to DB9-Female null-modem crossover cable to connect the device to the TV. - Page 78 Reference: TLM Communication Parameters (Cont.) Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV (j, k, m or x). [Command 2] Second command to control the TV. [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in the General Menu. Adjustment range is 1 to 99.
- Page 79 Reference: TLM Communication Parameters (Cont.) TLM Command Detailed Descriptions Note: Commands may work differently depending on model and signal. 01. Power (Command: k a) Transmission • To control Power On or Off of the TV. * [k][d][ ][Set ID][ ][Data][Cr] Transmission Data 00: Screen Mute Off (Picture On) [k][a][ ][Set ID][ ][Data][Cr]...
- Page 80 Reference: TLM Communication Parameters (Cont.) 07. Brightness (Command: k h) Transmission To adjust screen brightness. You can also adjust screen [k][l][ ][Set ID][ ][Data][Cr] brightness in the Picture Menu. Data 00: OSD Off 01: OSD On Transmission [k][h][ ][Set ID][ ][Data][Cr] [l][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 64 12.
- Page 81 Reference: TLM Communication Parameters (Cont.) • 15. Equalizer (Command: j v) Digital Antenna/Cable [Data0]: Physical Channel number * To adjust EQ of the TV. − Antenna (DTV): 02 – 4 5 (Decimal: 2 – 6 9) Transmission − Cable (CADTV): 01 ...
- Page 82 Reference: TLM Communication Parameters (Cont.) 17. Channel Add/Delete (NTSC) (Command: m b) 20. Input select (Command: x b) To set the saved channel status to delete or add. To select input source for main picture. * Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00: Delete...
- Page 83 Reference: TLM Communication Parameters (Cont.) Key Codes The following table provides key codes for a typical LG Installer Remote. Note: Some keys are not applicable to all models. Code Function Code Function (Hexa) (Hexa) PAGE (Green) PAGE (Red) (Yellow) (Blue)
-
Page 84: Troubleshooting
If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG representative. 206-4326... -
Page 85: Commercial Mode Check
Troubleshooting (Cont.) Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU SETTINGS on the Installer Remote. -
Page 86: Glossary Of Terms
Refers to a particular commercial mode of like analog channels, to be tuned without re- elements. The proper Admin Client must be operation within an LG TV. See also FTG quiring the dash key. Also, channels (analog used in accordance with licensed (Java or Mode. -
Page 87: Document Revision History / Open Source Software Notice
In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com. -
Page 88: Back Cover
1-888-865-3026 www.lg.com/us/business Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric and the “LG” logo are registered trademarks of LG Electronics Inc. b-LAN is a trademark of SONIFI Solutions, Inc. All other trademarks or registered trademarks are the property of their respective owners.