Related Manuals for HP EliteBook 828 G3
Summary of Contents for HP EliteBook 828 G3
- Page 1 HP EliteBook 828 G3 Notebook PC HP EliteBook 820 G3 Notebook PC Maintenance and Service Guide...
- Page 2 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
- Page 3 Important Notice about Customer Self-Repair Parts CAUTION: Your computer includes Customer Self-Repair parts and parts that should only be accessed by an authorized service provider. See Chapter 5, "Removal and replacement procedures for Customer Self-Repair parts," for details. Accessing parts described in Chapter 6, "Removal and replacement procedures for Authorized Service Provider only parts,"...
- Page 4 Important Notice about Customer Self-Repair Parts...
- Page 5 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
- Page 6 Safety warning notice...
-
Page 7: Table Of Contents
Table of contents 1 Product description ............................1 2 External component identification ........................6 Right ..................................6 Left ..................................8 Display ..................................9 Top ..................................10 TouchPad ............................10 Lights ..............................11 Buttons, speakers, and fingerprint reader ..................12 Keys ..............................13 Using the hot keys .......................... - Page 8 Speaker assembly ..........................59 Display assembly ..........................61 Top cover ............................65 7 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10 ................ 67 Using Computer Setup ............................67 Starting Computer Setup ........................67 Navigating and selecting in Computer Setup ................... 67 Restoring factory settings in Computer Setup .................
- Page 9 TPM BIOS settings (select products only) ......................75 Using HP Sure Start (select products only) ......................76 9 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 7 ................. 77 Using Computer Setup ............................77 Starting Computer Setup ........................77 Navigating and selecting in Computer Setup ...................
- Page 10 13 Backing up and recovering Windows 7 ......................94 Creating recovery media and backups ........................ 94 Guidelines ............................94 Creating recovery media with HP Recovery Disc Creator ..............94 Creating recovery media ....................95 Backing up your information ......................95 Performing a system recovery ..........................
-
Page 11: Product Description
Product description Category Description Product Name HP EliteBook 828 G3 Notebook PC HP EliteBook 820 G3 Notebook PC Processors Processors are attached to the system board. Sixth-generation Intel ® Core™ processors: Intel Core™ i7-6600U ● ● Intel Core i7-6500U ●... - Page 12 Category Description ● 500 GB, 7200 rpm, 7.0 mm, self-encrypting (FIPS-140-2; Opal 2) 500 GB, 7200 rpm, 7.0 mm, self-encrypting (Opal 2) ● ● 500 GB, 7200 rpm, 7.0 mm ● 500 GB, 7.0 mm, hybrid, 8 GB cach SSDs: ●...
- Page 13 Integrated wireless wide area network (WWAN) options by way of wireless module Two WWAN antennas built into display assembly Supports the following WWAN formats: HP lt4120 Qualcomm® Snapdragon™ X5 LTE Mobile Broadband Module ● ● HP hs31110 HSPA + Intel Mobile Broadband Module...
- Page 14 Category Description Preboot authentication (password, smart card) Operating system Preinstalled: ● Windows 7 Professional 32-bit and 64-bit Windows 8.1 China 64 (CPPP) ● ● Windows 8.1 High-end Emerging Markets 64 ● Windows 8.1 Emerging Markets 64 ● Windows 8.1 High-end Multilingual 64 ●...
- Page 15 Category Description ● Windows 7 Enterprise 64 Windows 8.1 Enterprise 64 ● ● Windows 10 Professional 64 Serviceability End user replaceable parts: AC adapter Battery Hard drive Memory module WLAN WWAN Keyboard...
-
Page 16: External Component Identification
Safety, and Environmental Notices. To access this guide: Windows 10: Select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. Windows 8 or Windows 7: Select the HP Support Assistant app on the Start screen, select My computer, and then select User guides. - Page 17 Component Description RJ-45 (network) jack/status lights Connects a network cable. Green (left): The network is connected. ● ● Amber (right): Activity is occurring on the network. Docking connector Connects an optional docking device. SIM card slot Supports a wireless subscriber identity module (SIM) card. Power connector Connects an AC adapter.
-
Page 18: Left
Left Component Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. -
Page 19: Display
Select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. Windows 8 or Windows 7: Select the HP Support Assistant app on the Start screen, select My computer, and then select User guides. Display... -
Page 20: Top
TouchPad Component Description Pointing stick (select products only) Moves the pointer and selects or activates items on the screen. Left pointing stick button (select products only) Functions like the left button on an external mouse. TouchPad on/off button/TouchPad light Turns the TouchPad on and off. ●... -
Page 21: Lights
Lights Component Description Caps lock light On: Caps lock is on, which switches the key input to all capital letters. Power light On: The computer is on. ● ● Blinking: The computer is in the Sleep state, a power-saving state. The computer shuts off power to the display and other unneeded components. -
Page 22: Buttons, Speakers, And Fingerprint Reader
Buttons, speakers, and fingerprint reader Component Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button ●... -
Page 23: Keys
Keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with a function key, the num lock key, or the key. Using the hot keys on page 13 Windows key Opens the Start menu. - Page 24 Press fn+function key Description Switches the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, repeatedly pressing fn+f4 alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor. Most external monitors receive video information on the computer using the external VGA video standard.
-
Page 25: Bottom
Bottom Component Description Docking connector Connects an optional docking device. Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. -
Page 26: Locating System Information
● Drive light ● Blinking white: The hard drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the ● hard drive. Locating system information Important system information is located on the bottom edge of the tablet or on the keyboard base. You may... - Page 27 Using Windows, briefly press the fn+esc key combination to display the System Information screen, which provides the product name and serial number of your computer, as well as information about the memory, processor, BIOS, and keyboard. Locating system information...
-
Page 28: Illustrated Parts Catalog
Computer major components NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are on the service tag at the bottom of your computer. - Page 29 806721-001 Intel Dual Band Wireless-AC 8260NGW 802.11a/b/g/n+ac non-vPro 2x2 WiFi + BT 4.2 806722-001 combo adapter WWAN module HP lt4120 LTE/EVDO/HSPA+ SnapdragonT X5 LTE Mobile Broadband Module 800870-001 HP hs31110 HSPA + Intel Mobile Broadband Module 822828-001 (10) Solid-state drive (SSD)
- Page 30 Item Component Spare part number (16) System board (includes processor and replacement thermal material, see System board on page (17) RTC battery 702853-001 (18) Speaker assembly (includes cable) 821684-001 (19) Bottom cover 821662-001 Chapter 3 Illustrated parts catalog...
-
Page 31: Display Assembly Subcomponents
Display assembly subcomponents Item Component Spare part number Bezel 821658-001 Microphone module 821696-001 Webcam module (includes microphone and cable) 821676-001 Raw panel 821655-001 821656-001 Display assembly subcomponents... -
Page 32: Plastics Kit
Item Component Spare part number Display cable (spared with the cable kit) Hinge covers (spared with the plastics kit) Hinges 821674-001 WWAN antenna (spared with back cover) WLAN antenna (spared with back cover) (10) Back cover (includes antennas) 821672-001 Plastics kit Item Component Spare part number... -
Page 33: Cable Kit
Cable kit Item Component Spare part number Cable kit 821669-001 NFC module cable Pointing stick cable Display cable Cable kit... -
Page 34: Mass Storage Devices
Mass storage devices Item Component Spare part number Hard drive 1 TB, 5400 rpm, 7 mm 762990-001 500 GB, 7200 rpm, 7 mm, FIPS 820572-001 500 GB, 7200 rpm, 7 mm, Opal-2 820573-001 500 GB, 7200 rpm, 7 mm 703267-001 500 GB, 5400 rpm, 7 mm, hybrid, 8 GB cache 732000-001 Hard drive hardware kit... -
Page 35: Miscellaneous Parts
65 W Smart Adapter NPFC, emerging markets 714657-001 45 W Smart Adapter NPFC nSlim 741727-001 45 W Smart Adapter NPFC 2-prong 742436-001 HP Smart AC Adapter 4.5 mm to 7.4 mm adapter 734734-001 HP DisplayPort to HDMI 1.4 Adapter 749288-001 HP Essential Top Load Case 679921-001... - Page 36 Component Spare part number For use in Japan 490371-291 For use in North America 490371-001 For use in the People’s Republic of China 490371-AA1 For use in South Africa 490371-AR1 For use in South Korea 490371-AD1 For use in Switzerland 490371-111 For use in Taiwan 490371-AB1...
-
Page 37: Removal And Replacement Procedures Preliminary Requirements
Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: Flat-bladed screwdriver ● ● Magnetic screwdriver Phillips P0 and P1 screwdrivers ● Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. -
Page 38: Cables And Connectors
Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. -
Page 39: Grounding Guidelines
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry. -
Page 40: Packaging And Transporting Guidelines
Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations. -
Page 41: Equipment Guidelines
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a ● minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. -
Page 42: Removal And Replacement Procedures For Customer Self-Repair Parts
NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. There are as many as xx screws that must be removed, replaced, and/or loosened when servicing Customer Self-Repair parts. - Page 43 Remove the 11 rubber plugs (1) and the 11 Phillips PM2.5x5.0 screws beneath them (2) from the bottom cover. Be sure to remove the screws in the following order. Remove the SD card blank and the 1 PM2.0×7.0 screw beneath it (3) that secures the bottom cover to the computer.
- Page 44 The rubber-plug sizes are as follows. The rubber-plug locations are as follows. Chapter 5 Removal and replacement procedures for Customer Self-Repair parts...
-
Page 45: Battery
WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a user-replaceable battery that is the sole power source for the computer can cause loss of information. -
Page 46: Hard Drive
Hard drive Description Spare part number 1 TB, 5400 rpm, 7 mm 762990-001 500 GB, 7200 rpm, 7 mm, FIPS 820572-001 500 GB, 7200 rpm, 7 mm, Opal-2 820573-001 500 GB, 7200 rpm, 7 mm 703267-001 500 GB, 5400 rpm, 7 mm, hybrid, 8 GB cache 732000-001 Before removing the hard drive, follow these steps: Shut down the computer. - Page 47 To remove the hard drive cover and bracket from the hard drive, lift the Mylar cover up off the drive, remove the 4 Phillips PM3.0×3.0 screws (1) that secure the bracket to the drive, and then lift the bracket up and off the hard drive (2). Reverse this procedure to install a hard drive.
-
Page 48: Ssd
Description Spare part number Solid-state drive 512 GB, SATA-3 TLC 840633-001 256 GB, PCIe 3x4 821683-001 256 GB, SATA-3 self-encrypting drive Opal-2 821680-001 256 GB, SATA-3 TLC 821681-001 240 GB, SATA-3 831760-001 180 GB, SATA-3, self-encrypting drive Opal-2 821679-001 180 GB, SATA-3 821678-001 128 GB, SATA-3 TLC 821677-001... - Page 49 Remove the drive (2) by pulling it away from the connector. NOTE: mSATA drives are designed with notches to prevent incorrect insertion. Reverse this procedure to reassemble and install the mSATA drive. NOTE: Only a hard drive or an SSD can be installed. To install an SSD, be sure that the standee is in place across from the connector and not stored beside the hard drive slot.
-
Page 50: Memory Modules
Failure to update the computer to the latest BIOS prior to installing new memory may result in various system problems. To update BIOS: Navigate to www.hp.com. Click Support & Drivers > click Drivers & Software. In the Enter a product name/number box, type the computer model information, and then click Search. - Page 51 Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch to prevent incorrect insertion into the memory module slot. NOTE: The computer uses two memory sockets. The socket labeled 2 houses the expansion memory module and the socket labeled 1 houses the primary memory module.
-
Page 52: Wlan/Bluetooth Combo Card
WLAN/Bluetooth combo card The computer uses a card that provides both WLAN and Bluetooth functionality. The WLAN module and WWAN module are not interchangeable. Description Spare part number Intel Dual Band Wireless-AC 3165 802.11ac 1x1 WiFi + BT 4.0 combo adapter 806723-001 Intel Dual Band Wireless-AC 8260NGW 802.11a/g/g/n+ac 2x2 WiFi + BT 4.2 combo adapter 806721-001... - Page 53 Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: WLAN modules are designed with a notch to prevent incorrect insertion. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration.
-
Page 54: Wwan Module
The WLAN module and WWAN module are not interchangeable. The WWAN module is available on select models only. Description Spare part number HP lt4120 LTE/EVDO/HSPA+ SnapdragonT X5 LTE Mobile Broadband Module 800870-001 HP hs31110 HSPA + Intel Mobile Broadband Module 822828-001 Before removing the WWAN module, follow these steps: Shut down the computer. - Page 55 Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch to prevent incorrect insertion. NOTE: If the WWAN antennas are not connected to the terminals on the WWAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration.
-
Page 56: Keyboard
Keyboard In this section, the first table provides the main spare part number for the keyboards. The second table provides the country codes. Description Spare part number Keyboard, no backlight 826631-xx1 Keyboard, backlit 826630-xx1 For use in country Spare part For use in country Spare part For use in country... - Page 57 Insert a screwdriver or similar thin tool into the hole beside the heat sink/fan assembly, and then press on the back of the keyboard until it disengages from the computer (2). Rotate the top of the keyboard upward, and then lift the keyboard up at an angle to disengage the tabs at the bottom of the keyboard. NOTE: Cables connect the bottom of the keyboard to the system board.
- Page 58 Reverse this procedure to install the keyboard. Chapter 5 Removal and replacement procedures for Customer Self-Repair parts...
-
Page 59: Removal And Replacement Procedures For Authorized Service Provider Parts
NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. There are as many as xx screws that must be removed, replaced, and/or loosened when servicing Authorized Service Provider only parts. - Page 60 Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
- Page 61 Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the system board to the computer. Lift the right side of the system board up at an angle (2). Pull the system board up and toward the right to remove it from the computer (3). Reverse this procedure to install the system board.
-
Page 62: Rtc Battery
RTC battery Description Spare part number RTC battery 702853-001 Before removing the RTC battery, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. -
Page 63: Heat Sink/Fan Assembly
Heat sink/fan assembly NOTE: The heat sink/fan assembly spare part kit includes replacement thermal material. Description Spare part number Heat sink/thermal module with fans 821691-001 Before removing the heat sink/fan assembly, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. - Page 64 Reverse this procedure to install the heat sink/fan assembly. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
-
Page 65: Fingerprint Reader Assembly
Fingerprint reader assembly Description Spare part number Fingerprint reader assembly (includes cable, bracket, and bezel) 821693-001 Before removing the fingerprint reader assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. -
Page 66: Touchpad Button Board
Touchpad button board Description Spare part number Touchpad button board 821668-001 Touchpad button board w/NFC antenna 821667-001 Before removing the touchpad button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. -
Page 67: Nfc Module
NFC module Description Spare part number NFC (Near Field Communication) module 821666-001 Before removing the NFC module, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer. -
Page 68: Smart Card Reader Board
Smart card reader board Description Spare part number Smart card reader board (includes cable) 821695-001 Before removing the card reader board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. -
Page 69: Speaker Assembly
Lift the smart card reader board left to remove it from the top cover (5). Reverse this procedure to install the card reader board. Speaker assembly Description Spare part number Speaker assembly (includes cable) 821684-001 Before removing the speaker assembly, follow these steps: Turn off the computer. - Page 70 Remove the speaker (2) from the computer. Reverse this procedure to install the speakers. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
-
Page 71: Display Assembly
Display assembly Description Spare part number Display panel assembly, touch screen 821657-001 Before removing the display assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. - Page 72 Remove the WWAN antennas (1) and WLAN antennas (2) (if equipped) from the routing path along the base of the computer. Remove the 4 Phillips PM2.5×5.0 screws (1) from the display hinges. Lift the hinges (2) up and remove the top cover from the display assembly (3). CAUTION: When installing the display assembly, be sure that the wireless antenna cables are routed and arranged properly.
- Page 73 Remove the display bezel (4). The display bezel is available using spare part number 821658-001. If it is necessary to replace the webcam or microphone module, gently pull the module away from the double-sided tape on the display enclosure (1), and then disconnect the cable from the module (2). The webcam module is available using spare part number 821676-001.
- Page 74 If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips PM2.0×3.0 screws that secure the panel to the display enclosure, and then lift the top of the panel upward. The raw display panel is available using spare part number 821655-001 for HD panels and 821656-001 for FHD panels.
-
Page 75: Top Cover
Remove the 6 Phillips PM2.5x2.5 screws that secure the hinges to the display enclosure (3), and then remove the display hinges from the display enclosure (4). Display hinges are available in the Display Hinge Kit using spare part number 821674-001. If it is necessary to replace the display/webcam cable, remove the display/webcam cable assembly from the routing (1) and then lift it from the computer (2). - Page 76 Before removing the top cover, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
-
Page 77: Computer Setup (Bios), Tpm, And Hp Sure Start In Windows 10
To start Computer Setup, follow these steps: ▲ Start Computer Setup. ● Computers or tablets with keyboards: ▲ Turn on or restart the computer, and when the HP logo appears, press to enter Computer Setup. Tablets without keyboards: ● ▲... -
Page 78: Restoring Factory Settings In Computer Setup
Select Main, select Save Changes and Exit, and then press enter. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Chapter 7 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 10... -
Page 79: Updating The Bios
Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Select the question mark icon in the taskbar. -
Page 80: Changing The Boot Order Using The F9 Prompt
For any compliance issues arising from your operation/usage of TPM which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities. -
Page 81: Using Hp Sure Start (Select Products Only)
BIOS to its previously safe state, without user intervention. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users. -
Page 82: Computer Setup (Bios), Tpm, And Hp Sure Start In Windows 8
To start Computer Setup, follow these steps: Start Computer Setup. ▲ ● Computers or tablets with keyboards: ▲ Turn on or restart the computer, and when the HP logo appears, press to enter Computer Setup. ● Tablets without keyboards: ▲... -
Page 83: Restoring Factory Settings In Computer Setup
To exit Computer Setup menus, choose one of the following methods: To exit Computer Setup menus without saving your changes: ● Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. – or – Select Main, select Ignore Changes and Exit, and then press enter. -
Page 84: Updating The Bios
Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. -
Page 85: Changing The Boot Order Using The F9 Prompt
For any compliance issues arising from your operation/usage of TPM which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities. -
Page 86: Using Hp Sure Start (Select Products Only)
BIOS to its previously safe state, without user intervention. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users. -
Page 87: Computer Setup (Bios), Tpm, And Hp Sure Start In Windows 7
To start Computer Setup, follow these steps: ▲ Start Computer Setup. ● Computers or tablets with keyboards: ▲ Turn on or restart the computer, and when the HP logo appears, press to enter Computer Setup. Tablets without keyboards: ● ▲... -
Page 88: Restoring Factory Settings In Computer Setup
Select Main, select Save Changes and Exit, and then press enter. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Chapter 9 Computer Setup (BIOS), TPM, and HP Sure Start in Windows 7... -
Page 89: Updating The Bios
Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. Access Help and Support by selecting Start > All Programs > HP Help and Support > HP Support Assistant. -
Page 90: Changing The Boot Order Using The F9 Prompt
For any compliance issues arising from your operation/usage of TPM which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities. -
Page 91: Using Hp Sure Start (Select Products Only)
BIOS to its previously safe state, without user intervention. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users. -
Page 92: Hp Pc Hardware Diagnostics (Uefi)
10 HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. - Page 93 Download any version of UEFI for a specific product Go to http://www.hp.com/support, and then select your country. The HP Support page is displayed. Click Drivers & Downloads. In the text box, enter the product name, and then click Go. – or –...
-
Page 94: 11 Backing Up And Recovering Windows 10
Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This ● step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For... -
Page 95: Using Windows Tools
HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive. -
Page 96: Restore And Recovery
Creating HP Recovery media (select products only) on page ● If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. -
Page 97: Using The Hp Recovery Partition (Select Products Only)
Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. -
Page 98: Changing The Computer Boot Order
Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection to an optical drive or a USB flash drive. -
Page 99: Removing The Hp Recovery Partition (Select Products Only)
Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP recovery media from the HP Recovery partition. -
Page 100: 12 Backing Up And Recovering Windows 8
For detailed instructions on various backup and restore options, perform a search for these topics in Windows Help and Support. In case of system instability, HP recommends that you print the recovery procedures and save them for later use. NOTE: Windows includes the User Account Control feature to improve the security of your computer. -
Page 101: Using F11 Recovery Tools
The recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled. -
Page 102: Using Windows Operating System Media (Purchased Separately)
To order a Windows operating system DVD, contact support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. -
Page 103: Using Windows Refresh Or Windows Reset
For more information on these features, see Windows Help and Support. Using HP Software Setup HP Software Setup can be used to reinstall drivers or select software that has been corrupted or deleted from the system. From the Start screen, type HP Software Setup. -
Page 104: 13 Backing Up And Recovering Windows 7
13 Backing up and recovering Windows 7 Your computer includes HP and Windows tools to help you safeguard your information and retrieve it if you ever need to. These tools will help you return your computer to a proper working state, all with simple steps. -
Page 105: Creating Recovery Media
HP Recovery Disc Creator can create two kinds of recovery DVDs: ● Windows 7 operating system DVD—Installs the operating system without additional drivers or applications. Driver Recovery DVD—Installs specific drivers and applications only, in the same way that the HP ●... -
Page 106: Performing A System Recovery
To create a backup using Windows Backup and Restore: NOTE: The backup process may take over an hour, depending on file size and the speed of the computer. Select Start > All Programs > Maintenance > Backup and Restore. Follow the on-screen instructions to set up your backup, create a system image (select models only), or create system repair media (select models only). -
Page 107: Using F11 Recovery Tools (Select Models Only)
Windows 7 operating system DVD to reboot the computer and repair the operating system. To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to http://www.hp.com/support. For worldwide support, go to http://welcome.hp.com/country/us/en/... - Page 108 NOTE: This process takes several minutes. If possible, back up all personal files. Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before the Windows operating system loads. When prompted, press any keyboard key. Follow the on-screen instructions.
-
Page 109: 14 Specifications
100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. -
Page 110: 15 Power Cord Set Requirements
15 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased. - Page 111 Country/region Accredited agency Applicable note number Sweden SEMKO Switzerland Taiwan BSMI The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
-
Page 112: 16 Statement Of Memory Volatility
Following system shutdown and removal of all power sources from an HP Business PC system, personal data can remain on volatile system memory (DIMMs) for a finite period of time and will also remain in nonvolatile memory. - Page 113 Reboot the system. If the system has a Trusted Platform Module (TPM) and/or fingerprint reader, one or two prompts will appear—one to clear the TPM and the other to Reset Fingerprint Sensor; press or tap to accept or to reject. Remove all power and system batteries for at least 24 hours.
-
Page 114: Nonvolatile Memory Usage
HP Sure Start only) backup of The content is managed Embedded Controller. critical System solely by the HP Sure Start BIOS code, EC Embedded Controller. firmware, and critical PC configuration data for select... - Page 115 Fingerprint reader 512 KByte flash Stores Fingerprint reader memory is Only a digitally signed fingerprint programmed by user application can make the templates. enrollment in HP call to write to the flash. ProtectTools Security Manager. Nonvolatile memory usage 105...
-
Page 116: Questions And Answers
HP has provided options in Computer Setup (BIOS) to allow you to run in legacy BIOS, if required by the operating system. Examples of this requirement would be if you upgrade or downgrade the OS. -
Page 117: Using Hp Sure Start (Select Models Only)
BIOS to its previously safe state, without user intervention. Those select computer models ship with HP Sure Start configured and enabled. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users. -
Page 118: 17 Recycling
Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. -
Page 119: Index
14 power 12 using 13 right pointing stick 10 drive light 16 HP PC Hardware Diagnostics (UEFI) right TouchPad 10 Driver Recovery DVD, using 82 creating 94 HP Recovery Disc Creator, using 94 using for restore 97 Index 109... - Page 120 10 system 86 drive 16 ports USB flash drive 87 microphone mute 11 Dual-Mode DisplayPort 6 using HP Recovery media 85 num lock 11 external monitor 8 power 11, 15 product description 3 RJ-45 (network) 7 110 Index...
- Page 121 84 removal 58 vents, identifying 8, 15 creating using HP Recovery spare part number 58 video, product description 2 Manager 85 smart card slot 8 recovery media, creating 94 solid-state drive warranty period 16...