Page 1
MOnITOR (LED Computer Monitor*) * Disclaimer : LG LED Monitor applies LCD screen with LED backlights. This product is a computer monitor and not for television purpose. Please read this manual carefully before operating your set and retain it for future reference.
TabLE of CoNTENTS LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. LICEnsE ............2 OPEn sOuRCE sOFTwaRE nOTICE The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI InFORMaTIOn ..........
The power cord provided may differ depending upon the region. and other relevant documents please visit https://opensource.lge.com. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing Supported Drivers and Software such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Page 4
Description front adjust button functions Information webcam webcam activity status indicator 24br750C/27br750C IR LED webcam activity status indicator mode LED Color webcam enabled Blue webcam disabled NoTE • The joystick button is located on the right back of the monitor.
Page 5
moving and Lifting the monitor How to use the Joystick button You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/ when moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or down with your finger.
Page 6
Installing on a Table adjusting the Stand Height • Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from Place the monitor mounted on the stand base in an upright position. the wall to ensure sufficient ventilation.
Page 7
adjusting the angle pivot feature The pivot feature allows the monitor to rotate 90° clockwise and -90° counter clockwise. Place the monitor mounted on the stand base in an upright position. adjust the angle of the screen. Raise the monitor to the maximum height. The angle of the screen can be adjusted forward or backward from -5°...
Page 8
Rotate the monitor 90° clockwise and -90° counter clockwise as shown in the figure. NoTE • auto Pivot feature of the display is not supported. • The screen can be rotated easily using the screenpivot shortcut key provided with your windows operating system.
Page 9
Swivel stand WARNING • • Take care when rotating the monitor if the cable is connected. Image shown may differ from your Monitor set. • To avoid injury when rotating the display, do not place your fingers between the display and the stand base. Swivel 60 degrees and adjust the angle of the Monitor set to suit your view.
Page 10
using the cable holder using the Kensington Lock arrange the cables using the cable holder as shown in the illustration. The connector for the Kensington security system is located at the back of the monitor. For more information on installation and usage, refer to the Kensington lock owner’ s manual or visit the website at http://www.kensington.com.
Page 11
NoTE • a non-VEsa standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws. 100 mm •...
Page 12
• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. use an authorized LG wall mount and contact the local dealer or qualified personnel. • To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
uSING THE moNITor Displayport Connection Transmits digital video and audio signals from your PC to the monitor. • Illustrations in this manual may differ from actual product. NoTE Press the tact key button, go to Settings Input, and then select the input option. •...
Page 14
Connecting LaN Connecting peripherals LaN connection uSb Device connection Connect the router or switch to the monitor. The usB port on the product functions as a usB hub. NoTE NoTE • The Lan cable is sold separately. • It is recommended you install all windows updates to keep your windows up-to-date before connecting to the product for use.
Page 15
(Recommend) • Headphone Port (4-pole ear microphone port) (24BR750C/27BR750C ) - The 4-pole ear microphone port supports us 4-pole standards, but not the European 4-pole ear microphone. - when using ear microphone (or Bluetooth® headset), audio input and output are directed to the connected device and the microphone and speaker on PC do not work.
uSEr SETTINGS NoTE • Your monitor’ s OsD (On screen Display) may differ slightly from that shown in this manual. activating the main menu Press the joystick button on the right back of the monitor. Move the joystick up/down and left/right to set the options. Press the joystick button once more to exit the main menu.
Page 17
main menu features main menu Description Input sets input mode. power off Turns off the monitor. Settings Configures the screen settings. picture mode sets the picture mode. Exit Exits the main menu. menu Settings To view the OsD menu, press the joystick button on the right back of the monitor and then enter the Settings. Move the joystick up/down and left/right to set the options.
Page 18
Quick Settings Settings > Quick Settings Description brightness adjusts the contrast and brightness of the screen. Contrast adjusts the volume. Volume NoTE • You can adjust mute / unmute by pressing the button in the Volume menu. The user can adjust it to red, green, or blue by customization. Custom warm sets the screen color to a reddish tone.
Page 19
Input Settings > Input Description Input List selects the input mode. when automatic input switch is set to on, display will automatically switch to new input when connected. auto Input Switch Enables auto Input Switch. Disables auto Input Switch. adjusts the aspect ratio of the screen. full wide Displays the video in widescreen, regardless of the video signal input.
Page 20
picture Settings > picture Description Custom allows the user to adjust each element. Vivid Heightens contrast, brightness and sharpness to display vivid images. Optimizes the screen for viewing documents. You can brighten the screen in the OsD menu. reader Optimizes the screen to improve the visual effects of a video. Cinema This mode is optimized for FPs games.
Page 21
Settings > picture Description brightness adjusts the contrast and brightness of the screen. Contrast Sharpness adjusts the sharpness of the screen. High Optimizes the screen for crystal clear images. Best for high-definition video or games. Optimizes the screen for comfortable viewing, with images at the middle level between the low and high modes. Best for uCC or sD middle videos.
Page 22
Settings > picture Description sets a response time for displayed pictures based on the movement of the picture on the screen. For a normal environment, it is recommended that you use fast. when there is a lot of motion, it is recommended that you use faster. setting to faster may cause image sticking.
Page 23
Settings > picture Description mode 1, mode 2, The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. Gamma mode 3 mode 4 If you do not need to adjust the gamma settings, select mode 4. set your own color temperature.
Page 24
General Settings > General Description Language Sets the menu screen to the desired language. USB Selection Select the USB upstream cable connection port to use USB hub of the monitor. Conserve energy by using luminance compensation algorithm. High Saves energy using the high-efficiency SMART ENERGY SAVING feature. Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Page 25
Settings > General Description set DP OuT for Multi stream Transport. Enables DP OuT(MsT) function Disables DP OuT(MsT) function. Dp ouT NoTE • Make sure that the graphics card supports the MsT function. • Because of the bandwidth limit of DisplayPort Ver. 1.2, up to 2560 x 1440 @ 75 Hz monitor can be connected and used. •...
TroubLESHooTING Nothing is displayed on the screen. • Is the monitor's power cord plugged in? Check if the power cord is correctly plugged into the power outlet. • Is the No Signal message being displayed? This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it. •...
Page 27
Do you see an "unrecognized monitor, plug and play (VESa DDC) monitor found" message? • Have you installed the display driver? Be sure to install the display driver from our web site: http://www.lg.com. • Make sure to check if the graphics card supports Plug and Play function.
proDuCT SpECIfICaTIoN 24br750C/24br650b DisplayPort /usB-C 10-bit color is supported. Color Depth HDMI 8-bit/10-bit/12-bit color is supported. Max Resolution 1920 x 1080 @ 75 Hz resolution Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 100-240 V ~50/60 Hz 2.5a On mode: 14.88 Typ.
Page 29
SpECIfICaTIoN 27br750C/27br650b DisplayPort /usB-C 10-bit color is supported. Color Depth HDMI 8-bit/10-bit/12-bit color is supported. Max Resolution 1920 x 1080 @ 75 Hz resolution Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 100-240 V ~50/60 Hz 2.5a On mode: 16.32 Typ.
Page 30
factory Support mode (preset mode, pC) preset mode Horizontal frequency (kHz) Vertical frequency (Hz) polarity (H/V) remarks 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 1280 x 720 1920 x 1080 66.59 59.93 1920 x 1080 83.89 74.97...
Page 31
® This Product qualifies for EnERGY sTaR The model and serial number of the product are located on the back and on one side of the product. Changing the factory default configuration and settings or enabling certain optional features Record them below in case you ever need service. and functionalities may increase energy consumption beyond the limits required for EnERGY ®...