Related Manuals for Miele FNS 7794 Series
Summary of Contents for Miele FNS 7794 Series
- Page 1 Operating instructions Freezer To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 12 583 980...
-
Page 2: Table Of Contents
Contents Warning and Safety instructions ................Caring for the environment ..................14 Installation........................15 Installation site ....................... 15 Side-by-side combinations ..................16 Climate range ......................16 Ventilation ........................17 Changing the door hinging .................... 17 Furniture door panel....................... 17 Horizontal and vertical gaps..................17 Weight of the furniture door.................. - Page 3 Information on Sabbath mode ................39 Automatic door opening (ActiveDoor) .............. 39 Changing the time before the door alarm is triggered ........42 Miele@home......................42 Changing the volume of the alarms and buzzers / ........44 Adjusting the display brightness ............... 44 Switching off Demo mode ...
- Page 4 Contents Service..........................74 Contact in the event of a fault ..................74 EPREL database ......................74 Warranty .......................... 74 EU Conformity declaration..................75 UK Conformity declaration ..................76 Copyrights and licences ....................77...
-
Page 5: Warning And Safety Instructions
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating and installation instructions in a safe place and pass them on to any future owner. - Page 6 The refrigeration appliance is also not suitable for use in areas where there is a risk of explosion. Miele cannot be held liable for damage caused by improper or incorrect use or operation of the appliance. ...
- Page 7 - Ventilate the room where the refrigeration appliance is located for several minutes. - Contact the Miele Customer Service Department. The more refrigerant there is in a refrigeration appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of a combustible gas/air mixture building up.
- Page 8 Miele can only guarantee the safety of the appliance when original Miele spare parts are used. For safety reasons, such replacement may only be carried out by a qualified specialist or the Miele Customer Service Department. Do not connect the appliance to the mains electrical supply by a ...
- Page 9 Miele-authorised technician. The ice-cube maker must only be connected to a cold water supply. Miele cannot be held liable for damage caused by a faulty mains water connection. While the appliance is under warranty, repairs should only be undertaken by a Miele authorised service technician.
- Page 10 Warning and Safety instructions Proper installation When installing the refrigeration appliance, it is a mandatory requirement to follow the installation instructions supplied with it. Always wear protective gloves when transporting and installing the refrigeration appliance. Two people are required to install the refrigeration appliance. Change the door hinging (if necessary) as described in the ...
- Page 11 Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance and product liability claims will be invalidated.
- Page 12 Warning and Safety instructions Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or pointed objects to - remove frost and ice, - separate frozen food or remove ice trays. Do not place electric heaters or candles in the appliance to defrost ...
- Page 13 Warning and Safety instructions Risk of fire due to escaping oil or refrigerant! The refrigerant and oil inside the appliance are flammable. In high enough concentrations, escaping refrigerant or oil may ignite if they come into contact with an external heat source. During disposal, make sure that the cooling circuit is not damaged in order to prevent refrigerant and oil escaping in an uncontrolled manner (see the data plate for details of the refrigerant).
-
Page 14: Caring For The Environment
Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged... -
Page 15: Installation
*INSTALLATION* Installation This appliance should be installed in a Installation site dry, well-ventilated room. Risk of damage and danger of Risk of damage due to high injury due to the refrigeration humidity. appliance tipping over. In environments with high humidity, This refrigeration appliance is very condensation can build up on heavy and can tip forwards when the... -
Page 16: Side-By-Side Combinations
*INSTALLATION* Installation When installing the refrigeration panels. Each of the two refrigeration appliance, please note the following: appliances must be built into a separate housing unit. - The socket must be easily accessible in an emergency, not concealed Climate range behind the appliance. -
Page 17: Ventilation
*INSTALLATION* Installation Ventilation It is essential to pay attention to the following: Risk of fire and damage due to insufficient ventilation. - Horizontal gap If the refrigeration appliance is not The gap between the furniture door ventilated sufficiently, the panel and the housing unit door above compressor will run more frequently or below it must be at least 3 mm. -
Page 18: Weight Of The Furniture Door
*INSTALLATION* Installation Weight of the furniture door Appliance Gap X [mm] furniture for different If the furniture door panel is too door edge radiiB heavy, this can cause damage. thickness Fitting a furniture door panel which is A [mm] heavier than the maximum permitted R1.2 weight could damage the hinges. -
Page 19: Building-In Dimensions
*INSTALLATION* Installation Building-in dimensions Installation in a tall unit/side view All dimensions are given in mm. * The declared energy consumption was calculated in a 560 mm deep niche. The refrigeration appliance is fully functional in a 550 mm niche but the energy consumption will be slightly higher. -
Page 20: Connections And Ventilation
*INSTALLATION* Installation Connections and ventilation All dimensions are given in mm. The specified ventilation cross-sections must be adhered to in order to ensure the correct functioning of the refrigeration appliance. a View from the front b Mains connection cable, length = 2200 mm c Water connection, length = 2000 mm d Ventilation cross-section min. -
Page 21: Mains Water Connection
This refrigeration appliance meets the The hose must only be replaced by requirements of IEC 61770 and an original Miele spare part. The EN 61770. food-grade hose is available to order from the Miele webshop, from the Miele Customer Service Department or from your local Miele dealer. -
Page 22: Water Supply
*INSTALLATION* Installation A stopcock must be provided between – Connecting the hose to the the hose and the mains water refrigeration appliance connection to ensure that the water supply can be cut off if necessary. Make sure that the stopcock remains accessible after the appliance has been installed. - Page 23 *INSTALLATION* Installation – Connecting the hose to the stopcock Connect the nut to the stopcock . – Checking the mains water connection Test the water connection for leaks before installing the appliance in the niche. Slowly open the stopcock and check the screw connections.
-
Page 24: Electrical Connection
Risk of fire from overheating. this Miele product must also be Connecting the refrigeration maintained in isolated operation or in appliance to a multi-socket plug operation that is not synchronised with... -
Page 25: Saving Energy
Saving energy How to save energy: Installation site The refrigeration appliance has to cool more often at higher ambient temperatures and consumes more energy in the process. Therefore, you should: - Install the refrigeration appliance in a well-ventilated room. - Do not install the refrigeration appliance near to a heat source (heater element, cooker). -
Page 26: Guide To The Appliance
Guide to the appliance This image shows an example of an appliance model with left-hand hinging. - Page 27 Guide to the appliance a Display b Interior lighting c NoFrost module d Tiltable freezer drawer e Freezer drawers f Ice cube maker with integrated ice cube tray and light g Ice&PizzaBox h Sliding switch for setting the sensitivity of the knock sensor (ActiveDoor)
-
Page 28: Start Display
Settings mode c Display for Miele@home connection status (only visible when the Miele@home function has been set up) d Demo mode display (only visible when the Demo mode function has been switched on) Using the appliance ... -
Page 29: Settings Mode
Change the time before the door alarm is triggered 1:00 (see “Selecting further settings”) Set up the Miele@home function for the first time, activate and deactivate WiFi or reset the network configuration (see “Selecting further settings”) / ... - Page 30 Guide to the appliance / Change the volume of the alarms and buzzers or switch them off entirely /level 5 (see “Selecting further settings”) Change the display brightness Level 4 (see “Selecting further settings”) Change the temperature unit °C °F °C (°Celsius or °Fahrenheit)
-
Page 31: Automatic Door Opening (Activedoor)
Guide to the appliance Automatic door opening Risk of damage while the (ActiveDoor) appliance door is closing automatically This function must be activated and Drawers or telescopic runners that configured in Settings mode (see are pulled out can be damaged “Selecting further settings –... -
Page 32: Via Voice Commands
“Selecting further settings”. cubes. The clip-on container can be easily removed and reinserted for use. Install the Miele app on your If you ever need a larger quantity of ice smartphone. cubes, you can simply remove the clip- ... -
Page 33: Tilting The Top Drawer
Loading food which is too heavy can damage the drawers and the pull-out Optional accessories shelf. A range of useful Miele accessories and Do not exceed the maximum load care products are available for your size of the pull-out shelf of 20 kg. -
Page 34: Switching On And Off
“Electrical connection”. will appear in the display. will then appear on the appliance Miele Please note: The refrigeration display, followed by . appliance is not disconnected from the power supply when it is switched Switching the refrigeration off. - Page 35 Switching on and off Risk of damage to the ice cube maker. If the water inlet is blocked while the ice cube maker is still in use, the water inlet pipe can freeze up. Turn the ice cube maker off if the water supply is turned off (e.g.
-
Page 36: The Correct Temperature
The correct temperature It is very important to set the correct temperature required and for this temperature to ensure the shelf life of temperature to then be shown as a food. Reducing the temperature reduces constant temperature in the display. the growth rate of microorganisms. -
Page 37: Using Super Freeze
Using Super freeze Switching SuperFreeze on and off SuperFreeze Touch the temperature display. When switched on, the SuperFreeze Tap to switch the SuperFreeze function can be used to rapidly function on and off again. reduce the temperature in the freezer section to its lowest setting When the SuperFreeze function is (depending on the ambient... -
Page 38: Selecting Further Settings
Selecting further settings Tap . Explanation of the different settings When the lock function is switched on, will light up orange. Only the settings that require further explanation are described below. Close the appliance door. Only then will the lock function be active. The door alarm and other warnings are automatically suppressed when you Deactivating the lock function /... -
Page 39: Information On Sabbath Mode
Selecting further settings When Sabbath mode is switched off, When Sabbath mode is switched on, the symbol will light up white. you cannot make any settings on your refrigeration appliance. Information on Sabbath mode This product is certified by Star-K, an Ensure that the appliance door is international institute for kosher properly closed, as visual and audible... - Page 40 Selecting further settings Setting the door opening angle Performing a reference run Leave the area of the door opening Risk of injury during automatic range clear. opening and closing of the appliance door Open the door to the required door Body parts such as fingers can opening angle (at least 70°).
- Page 41 Selecting further settings Tap to confirm the information. Tap will light up yellow in the display. will light up orange in the display. You now need to save the selected Swipe left or right until is shown in door opening angle.
-
Page 42: Changing The Time Before The Door Alarm Is Triggered
factory. Start again from the “ Activating ActiveDoor” step. To use this feature, you will need: - If appears in the display, the - A WiFi network reference run was successful. - The Miele app... - Page 43 Selecting further settings - A Miele user account You can create a Miele App user account via the Miele app. The Miele App is available to download free of charge from the Apple App The Miele app will guide you as you ®...
-
Page 44: Changing The Volume Of The Alarms And Buzzers
Tap OK. Swipe left or right until is shown in the middle. All entered settings and values for Miele@home are reset to the default Tap . settings. Select the brightness you want by The WiFi connection has been swiping the segment bar to the left or deactivated. -
Page 45: Resetting The Settings To Their Default Settings
Keep this appliance data to hand: - For integrating the refrigeration appliance into your WiFi network (see “Selecting further settings – Miele@home”) (depending on the model). - When reporting an appliance fault to the Miele Customer Service Department (see “Service”). -
Page 46: Temperature And Door Alarm
Temperature and door alarm The audible and visual signals may be Health risk caused by activated in the following situations: decomposing food. If the temperature in the freezer - You switch on the refrigeration remains above -18 °C for a long time, appliance and the temperature in a the frozen food can start to defrost. - Page 47 Temperature and door alarm Door alarm with automatic door Door alarm opening Door alarm with manual door opening ActiveDoor closes after a short time. The appliance door is left open for an The refrigeration appliance is fitted extended period. with a door alarm to avoid increased The refrigeration appliance is fitted energy consumption and food with a door alarm to avoid increased...
-
Page 48: Freezing And Storing Food
Freezing and storing food - That the temperature at which the Freezing fresh food frozen food is being stored in the shop Health risk caused by is -18 °C or colder decomposing food. Where possible, transport frozen food If the temperature in the freezer in an insulated bag and then store it remains above -18 °C for a long time, quickly in the refrigeration appliance. - Page 49 Freezing and storing food Expel as much air as possible from – VarioRoom: freezing the maximum the packaging and close it tightly. amount of food (see data plate) Make a note of the contents and the If the ventilation slots are blocked, date of freezing on the packaging.
-
Page 50: Storage Time For Frozen Food
Freezing and storing food Storage time for frozen food Food group Storage time (Months) Ice cream 2 to 6 Bread, baked goods 2 to 6 Cheese 2 to 4 Fish, oily 1 to 2 Fish, lean 1 to 5 Sausage, ham 1 to 3 Game, pork 1 to 12 Poultry, beef 2 to 10 Vegetables, fruit 6 to 18 Herbs 6 to 10... -
Page 51: Making Ice Cubes
Making ice cubes Check and pay attention to the following Only make normal domestic quantities before switching the ice cube maker on: of ice cubes with the ice cube maker. - The ice cube maker must be clean. The ice cube maker can make up to approx. -
Page 52: Switching The Ice Cube Maker On And Off
Making ice cubes Tip: Empty the clip-on container or the Switching the ice cube ice cube drawer at regular intervals, or if maker on and off you have not produced any ice for more Tap . than a week. This will ensure that you always have fresh ice and the ice cubes ... -
Page 53: Defrosting
Defrosting The appliance is equipped with a NoFrost system. The refrigeration appliance defrosts automatically. The moisture generated in the appliance collects on the condenser and is automatically defrosted and dissipated from time to time. This automatic defrosting system enables the refrigeration appliance to remain permanently ice-free. -
Page 54: Cleaning And Care
Cleaning and care - Sharp metal scrapers The data plate located inside the interior cabinet of the refrigeration We recommend using a clean sponge appliance must not be removed. It and lukewarm water with a little contains information which is required washing-up liquid to clean the surfaces in the event of a fault. -
Page 55: Cleaning Accessories By Hand Or In The Dishwasher
Cleaning and care Pull out the glass plate together with Cleaning accessories by hand the guide rails. or in the dishwasher Pull the guide rails off to the side. The following components must be After cleaning, reattach the guide rails cleaned by hand only: to the glass plate. - Page 56 Cleaning and care 2. Push the telescopic runner to the Removing the Ice&PizzaBox with pull- side. out shelf 3. Then pull the telescopic runner off to the rear. Pull off the protective trim at the front and back of the shelf. ...
- Page 57 Cleaning and care Refitting the pull-out shelf with Ice&PizzaBox Fit the telescopic runners on each side of the glass shelf. Insert the glass shelf into the freezer section. Lift the pull-out shelf first at the front left 1.), then at the front right 2.) so that it comes loose from its fastening.
- Page 58 Cleaning and care Cleaning the ice cube tray The ice cube tray cannot be removed and therefore has to be moved into the cleaning position. Press the pull-out shelf down slightly at the front so that it audibly engages. ...
-
Page 59: Cleaning The Door Seal
The ventilation gaps should be cleaned on a regular basis with a brush or vacuum cleaner (you could use a Miele vacuum cleaner dusting brush, for example). After cleaning Replace all shelves and accessories in the refrigeration appliance. -
Page 60: Problem Solving Guide
You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/ service. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it. - Page 61 Problem solving guide Problem Cause and remedy Close the appliance door. After a while, the temperature will return to normal by itself. If a thick layer of ice has already formed, this will affect cooling and increase energy consumption. ...
- Page 62 Check whether the door seal is damaged. The door seal is dam- No tools are required to change the door seal. aged or needs to be re- Change the door seal. A replacement is available placed. from Miele or from specialist retailers.
- Page 63 Problem solving guide Other problems Problem Cause and remedy Food has frozen to- The food packaging was not dry when placed in the gether. freezer. Use a blunt instrument, e.g. a spoon handle or plastic scraper, to prise it apart carefully. There is no audible alarm This is not a fault.
- Page 64 Move the door manually. and an alarm will also sound. The door hinge mechanism is blocked. Do not move the door against the motorised movement. This can damage the door hinges. Contact the Miele Customer Service Department.
- Page 65 There is a kink in the hose. Check the hose; if it is faulty, it must only be replaced by an original Miele spare part. The water connection pressure is too low. Check that the water connection pressure is between 150 kPa and 620 kPa (1.5 bar and 6.2 bar).
- Page 66 Problem solving guide Message Cause and remedy is lit up red in the The temperature alarm has been activated; the temperature display and temperature in the freezer section has risen higher or fallen lower than the temperature set. an alarm is also sound- Possible reasons for this include: ing.
- Page 67 Problem solving guide Message Cause and remedy lights up red in the Indication of an interruption to the power supply: the display and an alarm temperature in the refrigeration appliance over the last few days or hours has risen too high because of a also sounds.
- Page 68 Tap on the display to switch the alarm off. the display and a fault code F with Contact the Miele Customer Service Department. numbers may ap- To report the fault, you need the fault code and also pear. An alarm the model identifier and serial number of your will also sound.
- Page 69 The door is not respond- The voice assistant is not set up. ing to voice commands Configure the setting in the Miele app. (depending on the Automatic door opening is not activated. model). Activate automatic door opening (see “Automatic door opening (ActiveDoor) ...
- Page 70 Risk of electric shock due to exposed, live electrical components. When removing the lighting cover, there is a risk of coming into contact with live electrical components. Do not remove the lighting cover. The LED lighting may only be repaired or replaced by the Miele Customer Service Department.
- Page 71 15 minutes if the appliance door is left open. If this is not the case, then there is a fault. Call the Miele Customer Service Department. The interior lighting is This is not a fault. The door alarm has been activated.
-
Page 72: Noises
Noises The refrigeration appliance is producing various noises during operation. If the cooling performance is low, the refrigeration appliance will conserve energy but operate for longer. The volume will be lower. Food will be chilled faster if the cooling performance is high. The volume will be higher. - Page 73 Noises Noises Cause and remedy Vibrating, The refrigeration appliance is uneven. Use a level to check and rattling, clinking adjust the alignment of the refrigeration appliance. The refrigeration appliance is aligned by raising or lowering the adjustable feet (depending on the model) underneath it. For niches of 140 cm and more: place the stabilising rods supplied underneath the appliance base.
-
Page 74: Service
Service EPREL database Information to help you rectify faults yourself and about Miele spare parts Since 1 March 2021, information on can be found at www.miele.com/ energy labelling and ecodesign service. requirements has been available in the European Product Database (EPREL). -
Page 75: Eu Conformity Declaration
EU Conformity declaration Miele hereby declares that this freezer complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to https:// miele.co.uk/manuals and enter the... -
Page 76: Uk Conformity Declaration
2.4000 GHz – 2.4835 GHz Maximum transmitting power of the < 100 mW WiFi module This Statement of Compliance confirms this Miele product fully complies with the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. 1) Household Appliance –... -
Page 77: Copyrights And Licences
This software/these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. Furthermore, the communication module integrated in the appliance contains software components which are distributed under open source licence conditions. - Page 79 United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...
- Page 80 FNS 7794 ... en-GB M.-Nr. 12 583 980 / 02...