Table of Contents
Advertisement
Power cable
Table 5-6
Power cable description and spare part number information
Description
Power cable
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
6.
Remove the WLAN module (see
7.
Remove the system board (see
Remove the power cable:
1.
Turn the system board upside down with the front toward you.
2.
Disconnect the power cable from the system board.
Reverse this procedure to install the power cable.
34
Chapter 5 Removal and replacement procedures
Bottom cover on page
22).
WLAN module on page
26).
System board on page
30).
Battery on page
24).
Spare part number
L73311-001
Advertisement
Table of Contents
