Table of Contents
Advertisement
USB/audio board cable
NOTE:
The USB/audio board high-power cable is available using spare part number L73309-001. The USB/
audio board low-power cable is available using spare part number L73310-001.
Before removing the USB/audio board cables, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
Remove the USB/audio board cables:
1.
Release the ZIF connectors (1) to which USB/audio board high-power cable and low-power cable are
connected, and then disconnect the USB/audio board high-power cable and low-power cable from
the system board.
2.
Release the ZIF connectors (2) to which USB/audio board high-power cable and low-power cable are
connected, and then disconnect the USB/audio board high-power cable and low-power cable from
the USB/audio board.
3.
Remove the USB/audio board high-power cable (3) and low-power cable.
Reverse this procedure to install the USB/audio board high-power and low-power cables.
28
Chapter 5 Removal and replacement procedures
Bottom cover on page
22).
Battery on page
24).
Advertisement
Table of Contents
