Speakers
Table 5-7
Speakers description and spare part number information
Description
Speaker Kit (includes left and right speakers, cables, and 3 rubber isolators)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Release the webcam/microphone module cable from the retention clips (1) and routing channel built into
the speakers.
2.
Disconnect the speaker cable (2) from the system board.
3.
Remove the speakers (3).
NOTE:
These isolators are critical to the performance of the speakers. The absence of these isolators or damage
to them can degrade the speakers performance.
Reverse this procedure to install the speakers.
Bottom cover on page
When removing the speakers, make note of the location and condition of the rubber isolators (4).
22).
Battery on page
24).
Component replacement procedures
Spare part number
L73318-001
35