Table of Contents
Advertisement
Available languages
Available languages
en
c Silence AirClean 50 (grey)
d Active AirClean 50 (black)
e HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with fil-
ter c, d or e, you need to activate the
timestrip® filter change indicator.
Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (Fig. 09).
Remove the indicator strip (Fig. 10).
Press the timestrip® filter change in-
dicator (Fig. 11).
After approx. 10–15 seconds, a thin red
line will appear in the left-hand side of
the display (Fig. 12).
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the exhaust filter timestrip®
change indicator works
The exhaust filter timestrip® change in-
dicator shows the remaining functional
life of the exhaust filter. After approx. 50
operating hours the display will be com-
pletely filled with red (Fig. 13). 50 oper-
ating hours equates to approximately
one year of use.
48
Using the accessories supplied
(Fig. 14)
Crevice nozzle
For cleaning in folds, crevices or
corners.
Dusting brush with natural
bristles
For cleaning skirting boards, as
well as ornate, carved or particu-
larly delicate objects.
The head can be swivelled to ad-
just the angle.
Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, etc.
Some models are supplied as standard
with one of the following accessories
which are not illustrated:
– Turbobrush
– AllergoTeQ floorhead
These are supplied with their own oper-
ating instructions.
To open the accessories compart-
ment (Fig. 15)
Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
Take out the accessory you require.
Press down firmly on the lid to close
it.
Advertisement
Chapters
Table of Contents
