Table of Contents
Advertisement
Installation
Installing several wine units/re-
frigeration appliances
Risk of damage due to condensa-
tion on external appliance panels.
In environments with high humidity,
condensation can build up between
the external wine unit panels, which
can cause corrosion.
Do not place different wine units/re-
frigeration appliances directly next to
one another.
A distance of at least 70 mm must be
maintained between the wine units/
refrigeration appliances.
Changing the door hinging
The wine unit is supplied with right-
hand hinging. If left-hand hinging is re-
quired, the hinges must be changed
(see accompanying installation instruc-
tions).
Tip: Place a suitable cover on the floor
in front of the wine unit to protect the
appliance door and your floor from dam-
age.
Risk of injury and damage due to
live electrical components.
You will come into contact with live
electrical components while you are
changing the hinging.
Switch off the appliance at the wall
socket and withdraw the plug before
changing the hinging.
Danger of injury and damage to
the appliance due to heavy door.
There is an increased risk of injury
and damage if the door hinging is in-
stalled by a single person.
Always change the door hinging with
the help of a second person.
54
Installing the wine unit
Risk of injury and damage due to
the wine unit tipping over.
There is an increased risk of injury
and damage if the wine unit is in-
stalled by a single person.
Two people are always required to in-
stall the wine unit.
Risk of damage to the appliance
door caused by impact.
The appliance door could hit the wall
of the room resulting in damage to
the door.
Protect the appliance door by fitting a
felt stopper, for example, to the wall
of the room.
Risk of damaging the floor.
Moving the wine unit can cause dam-
age to the floor.
Move the wine unit carefully on floors
that are sensitive to scratching.
For easier installation, there are trans-
port handles on the back at the top
and transport wheels underneath the
wine unit.
Tip: The wine unit must be empty when
it is installed.
Prepare the wine unit for installation
as close as possible to its intended in-
stallation site.
Connect the wine unit to the electri-
city supply as described in "Installa-
tion – Electrical connection".
Move the wine unit carefully to its in-
tended installation site.
Advertisement
Table of Contents
