Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG 27LN66 Series
Summary of Contents for LG 27LN66 Series
- Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL720747022312REV01* Copyright © 2023 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
Table of Contents Warning! Safety Instructions Adjusting the Angle of the TV to suit view Preparing Using Remote Control Separate Purchase Troubleshooting 5 Magic Remote Control Settings 5 Wall Mounting Bracket Lifting and moving the TV Specifications 20 HDMI-DTV supported mode Mounting on a Table 20 HDMI-PC supported Mode 7 Attaching the TV to a Desk... -
Page 3: Warning! Safety Instructions
Warning! Safety • Ventilation - Install your TV where there is proper ventilation. Do not install in a Instructions confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in. - Page 4 Unauthorised modification could void the user’s authority to operate this product. • Use only an authorised attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
-
Page 5: Preparing
Preparing Separate Purchase Separate purchase items can be changed or modified for quality • If the TV is turned on for the first time after it was shipped from the improvement without any notification. Contact your dealer to buy these factory, initialization of the TV may take a few minutes. -
Page 6: Lifting And Moving The Tv
Lifting and moving the TV • When transporting the TV, do not expose the TV to jolts or excessive vibration. • When transporting the TV, keep the TV upright, never turn the TV on Please note the following advice to prevent the TV from being scratched its side or tilt towards the left or right. -
Page 7: Mounting On A Table
Mounting on a Table Attaching the TV to a Desk (Depending on model) (Depending on model) The TV should be attached to a desk so it cannot be pulled in a forward/ backward direction, potentially causing injury or damaging the product. 1 Lift and tilt the TV into its upright position on a table. -
Page 8: Using The Kensington Security System
Using the Kensington security Securing the TV to a Wall system (Depending on model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. -
Page 9: Mounting To The Wall
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 10: Connections
Connections Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Connect various external devices to the TV and switch input modes to Some separate cable is not provided. select an external device. -
Page 11: External Speakers
External Speakers External Devices Available external devices are: Blu-ray player, HD receivers, DVD players, (Depending on model) VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. • The external device connection may differ from the model. •... -
Page 12: Network
Network Method of volume control port (Depending on model) (Depending on model) • Cable Spec. Wired network connection Each up/down pins This TV can be connected to a Pro:Centric server via the port. After are connected to CPU making the physical connection, the TV needs to be set up for network with pull up resistor communication. -
Page 13: Using Button
Using Button Adjusting the Angle of the TV to suit view You can simply operate the TV functions, using the button. (Depending on model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. -
Page 14: Using Remote Control
Using Remote Control * To use the button, press and hold for more than 3 seconds. ** To use the button, press and hold for more than 5 seconds. The descriptions in this manual are based on the buttons on the remote (Without facing the TV) control. - Page 15 (Depending on model) * To use the button, press and hold for more than 3 seconds. (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Audio descriptions function will be enabled. Resizes an image.
-
Page 16: Troubleshooting
Troubleshooting • Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. • Failure to match the correct polarities of the battery may The software version can be updated for improvement in performance. cause the battery to burst or leak, resulting in fire, personal Customer needs to ensure the compatibility of customer’s equipment injury, or ambient pollution. -
Page 17: Settings
Settings Abnormal display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with (The configurable items differ depending on model.) product. • [Standard] : Displays the picture with natural contrast, brightness and •... -
Page 18: Specifications
Specifications (Depending on country) Broadcasting Specifications Digital TV Analogue TV DVB-S/S2 PAL/SECAM B/G, D/K, I Television system DVB-T/T2 SECAM L DVB-C DVB-S/S2 DVB-C DVB-T/T2 VHF III: 174 ~ 230 MHz Programme coverage UHF IV: 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950~2,150 MHz 46 ~ 890 MHz... - Page 19 (Only 27LN66*) Wireless module (LGSBWAC95) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 19 dBm 5,150 to 5,725 MHz 18 dBm 5,725 to 5,850 MHz 13.5 dBm Bluetooth Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 9 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
-
Page 20: Hdmi-Dtv Supported Mode
HDMI-DTV supported mode Supported Photo Formats Horizontal Vertical File Resolution Format Resolution Frequency (kHz) Frequency (Hz) Format 31.46 59.94 Minimum: 64 (W) x 64 (H) 640 x 480p 31.50 60.00 Maximum (Normal Type): .jpeg, .jpg, 31.46 59.94 JPEG 15360 (W) x 8640 (H) 720 x 480p .jpe 31.50 60.00... -
Page 21: Supported Audio Formats
Supported Audio Formats Supported Video Formats File Format Item Info Extension Codec Bit rate 32 Kbps - 320 Kbps VC-1 Advanced Profile (except for Video WMVA), VC-1 Simple and Main Profiles .asf Sample freq. 16 kHz - 48 kHz .mp3 .wmv WMA Standard (except for WMA v1/ Support MPEG1, MPEG2 Audio... -
Page 22: Open Source Software Notice Information
The Bluetooth word mark and logos are registered trademarks Information owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners. (Depending on model) •... -
Page 23: Ir Codes
IR Codes • This feature is not available for all models. Code (Hexa) Function Code (Hexa) Function (POWER) TIMER Number Key 0-9 10-19 Alphabet buttons (SPACE) (BACK) - Page 24 • This feature is not available for all models. Code (Hexa) Function Code (Hexa) Function (POWER) (INPUT) Number Key 0-9 10-19 Alphabet buttons (MUTE) (HOME) (SETTINGS)
-
Page 25: External Control Device Setup
External Control Device ►B Type Setup RS-232C IN (CONTROL & SERVICE) RS-232C Setup (Depending on model) • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. -
Page 26: Rs-232C Configurations
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For [Set ID] number, see "Real data mapping". -
Page 27: Command Reference List
Command Reference List Data Command1 Command2 (Hexadecimal) (Depending on model) 24 Fail Over Mode (See p. 34) Data Command1 Command2 25 Fail Over Input (Hexadecimal) (See p. 34) Select 1 Power 00 to 01 26 Internal 2 Aspect Ratio (See p. 28) storage media n, a8 (See p. -
Page 28: Transmission / Receiving Protocol
Transmission / Receiving Protocol 1 Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission Transmission (k)(a)( )(Set ID)( )(Data)(Cr) (Command1)(Command2)( )(Set ID)( )(Data)(Cr) Data 00 : Off (Command1) : First command to control the TV. (j, k, m or x) Data 01 : On (Command2) : Second command to control the TV. - Page 29 3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ►To select screen mute on/off. ►To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission (k)(d)( )(Set ID)( )(Data)(Cr) (k)(g)( )(Set ID)( )(Data)(Cr) Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : Screen mute on (Picture off) Data Min : 00 to Max : 64 Data 10 : Video mute on...
- Page 30 9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen tint. ►To lock the front panel controls on the monitor and remote control. You can also adjust tint in the picture settings. Transmission Transmission (k)(m)( )(Set ID)( )(Data)(Cr) (k)(j)( )(Set ID)( )(Data)(Cr)
- Page 31 15 Energy Saving (Command: j q) 17 Equalizer (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalizer. Energy Saving in picture settings. Transmission Transmission (j)(v)( )(Set ID)( )(Data)(Cr) (j)(q)( )(Set ID)( )(Data)(Cr) Power Saving Level Function...
- Page 32 18 Tune Command (Command: m a) 19 Programme Skip / Add (Command: m b) ►Select channel to following physical number. ►To set skip status for the current Programme. Transmission Transmission (m)(a)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Cr) (m)(b)( )(Set ID)( )(Data)(Cr) Data 00 : High channel data Data 00 : Skip Data 01 : Low channel data...
- Page 33 22 Input select (Command: x b) (Main Picture Input) 23 Programme block/unblock (Command: m d) ►To select input source for main picture. ►This command may work differently depending on model and signal. Transmission (x)(b)( )(Set ID)( )(Data)(Cr) (For South Korea, North/Latin America except Colombia Model) Data Structure Transmission (m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Data 03)(Data 04)
- Page 34 (For all other regions including Colombia, Excluding the above 24 Fail Over Mode (Command: m i) countries) ►Selects the Fail Over mode. Transmission Transmission (m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Data 03)(Data (m)(i)( )(Set ID)( )(Data)(Cr) 04)(Cr) Data 00 : Off (Data 00) : Physical Channel Number Data 01 : Auto (Data 01)(Data 02) : Channel Data...
- Page 35 26 Internal storage media contents play (Command: s n, a8) * Real data mapping ►Plays media stored in the internal memory. 00 : Step 0 ►This command may work differently depending on model and signal. Step 10 (Set ID 10) Transmission Step 15 (Set ID 15) (s)(n)( )(Set ID)( )(a)(8)( )(Data)(Cr)
- Page 36 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial no.