Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..27 Table of Contents 6.8.1 Auxiliary Functions..... 27 1 Safety Instructions......6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........29 Electrical Safety......
1 Safety Instructions This section includes the safety • This appliance is intended to instructions necessary to pre- be used in household and sim- vent the risk of personal injury or ilar applications. For example; material damage. – Personnel kitchens of stores, Our company shall not be held offices and other work envir- responsible for damages that...
with, climb on top or inside the • Do not tuck the power cord un- product. Check inside the der the product or to the rear product before use. of the product. Do not put • Use child lock to prevent chil- heavy items on the power dren from intervening with the cord.
• Never connect your product to product for installation and electricity saving devices. Such make sure the electrical mains, systems are harmful to the clean water mains and water product. outlet are suitable. If not, call a qualified electrician and Handling Safety plumber to have them make the necessary arrangements.
Page 7
• Do not install the product at be minimum 0.1 MPa (1 bar) locations where the temperat- and maximum 1MPa (10 bars). ure drops below 0 ºC. 10 to 80 litres of water should • Do not place the product on a be running from the tap in a carpet or similar surface.
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
– Make sure the room where • Do not put hands, feet and the washing machine is metal objects under or behind placed is well ventilated. your product. This can cause jams, and any sharp edge can – Wipe the door gasket and cause personal injury.
in the machine cools down in order to avoid risk of getting burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE).
3 Technical Specifications Manufacturer’s name or commercial brand Beko BM3WT4941IA Model name 457100007500 Rated Capacity (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) 54,6 Single Water inlet / Double Water inlet + / -...
4 Installation 4.1 Appropriate Installation Loca- Please read the “Safety Instruc- tion tions” section first! • Place the product on a hard and level Your washing machine automatic- floor. Do not place it onto a carpet with ally detects the amount of laundry high pile or other similar surfaces.
Cover A 3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. NOTICE Remove the transportation safety bolts before operating the product. Tilt the machine back slightly. Rest the tabs Otherwise, the product will get of Cover A against the lower panel.
vent the water leaks and resultant dam- of the hose into the waste water or do ages, keep the taps closed when you do not insert it into the drain for more than not use the product. 15 cm. If it is too long, cut it short. 5.
that shall be incurred due to using the 3. Connect the brown (live) wire to the ter- product without grounding according to minal in the plug marked ‘L’ or coloured local regulations. red. • Connection must comply with national With the alternative plugs a 13 A fuse must regulations.
• Always observe the instructions given on • Operate the product in the highest load the garment care labels. capacity allowed for the programme you have selected, but do not overload. See 5.2 Preparing Laundry for Washing "Programme and consumption table" •...
• If you are using a programme without Follow the instructions in “Pro- pre-washing, do not put detergent in the gramme and consumption table”. pre-wash compartment (compartment When the appliances is overloaded no. “1”). product’s washing performance will • If you are using a program with prewash, drop.
Page 18
Adjusting the Detergent Amount Use of Gel and Tablet Detergents The amount of detergent depends on the • If the detergent is fluid and there is no li- amount of laundry, how soiled they are and quid detergent compartment in your the water hardness.
• Select a programme with low temperat- compartment no. “2” in the detergent ure washing while using oxygen-based drawer and wait for the product to rinse decolourants. away the detergent during water intake. • Oxygen-based decolourants can be used Add the decolourant to the same com- together with detergents.
starts, in 20-25 minutes actual load is de- programme duration increased automatic- tected by the machine. And if the detected ally. You can follow this change on the dis- load is higher than half load; washing pro- play. gramme will be adjusted accordingly and 6 Operating the Product Please read the “Safety Instruc- tions”...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration Information 4 Door Lock Is Engaged Symbol 5 Programme Follow-up Indicator 6 No Water Indicator 7 Delayed Start Enabled Indicator 8 Auxiliary Function Indicators 3 9 Auxiliary Function Indicators 2 10 Child Lock Enabled Symbol 11 Auxiliary Function Indicators 1 12 No Spin Indicator...
Page 23
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection programme stages may automatically get shorter. In this way, energy and water con- 1. Determine the programme suitable for sumption would be much less. the type, quantity and soiling level of the • Cottons laundry in accordance with "Programme You can wash your durable cotton laundry and consumption table".
of your machine. Prewash detergent may Do not load more than 1 double pour out on your clothes and cause fibre duvet (200 x 200 cm). stains. Do not wash your duvets, pillows ** It is recommended to operate the cycle and etc.
2. Select the stain you want to clean by • 20°C locating it in the groups above and se- You can wash your lightly soiled cotton lecting the related group with the Quick/ laundry in this program. Intense auxiliary function button. •...
Whenever a new programme is selected, without spinning your laundry. Programme the recommended spin speed of the selec- will resume and complete after draining the ted programme is displayed on the Spin water. Speed indicator. It is possible that the re- If you want to spin the laundry held in wa- commended spin speed value is not the ter, adjust the Spin Speed and press Start/...
In case the FAST or INTENSIVE led is not lit, • Water Mode the appropriate programme duration is This auxiliary function key allows you to se- shown for your normally soiled clothes/ lect the additional functions of Water Sav- laundry. ing, Pre-Wash, and Extra Rinse or Extra wa- Depending on the programme selection, the ter depending on the model of your ma-...
A Prewash is only worthwhile for heavily Programme duration may differ soiled laundry. Not using the Prewash will from the values in section "Pro- save energy, water, detergent and time. gramme and consumption table" depending on the water pressure, • Child Lock water hardness and temperature, Use Child Lock function to prevent children ambient temperature, amount and...
2. Select the washing programme, temper- Opening the loading door in case of ature, spin speed and, if required, the power failure: auxiliary functions. In case of power failure, you can 3. Set the End Time of your choice by use the loading door emergency pressing the End Time button.
6.12 Changing the Selections After The selected programme starts Programme has Started anew. Adding laundry after the programme has Changing the auxiliary function, speed started: and temperature: If the water level in the machine is suitable Depending on the step the programme has when you press Start/Pause button, the reached, you can cancel or activate the aux- door lock will be deactivated and the door...
7 Maintenance and Cleaning Please read the “Safety Instruc- Repeat Drum Cleaning process in tions” section first! every 2 months. NOTICE: Use an anti-limescale Service life of your product extends and fre- suitable for the washing machines. quently experienced problems will be re- duced if it is cleaned at regular intervals.
filters prevent foreign substances and dirt NOTE: in the water to enter the product. Filters Foreign substances left in the should be cleaned if they are dirty. pump filter may damage your product or may cause noise prob- lem. If you live in areas prone to frost, re- member to turn off the water tap, disconnect the main hose, and drain the water from the product...
the end of the hose with the plug. Drain 2. Replace the filter. all water by repeating the procedure spe- 3. If the filter cap is composed of two cified above after draining the container. pieces, close the filter cap by pressing •...
Page 35
• Number of rinses and/or amount of rins- Product stopped shortly after the pro- ing water have increased. >>> Product in- gramme started. creases the amount of rinsing water • Machine has stopped temporarily due to when good rinsing is needed and adds an low voltage.
Page 36
• Excessive foam has occurred and auto- • Excessive amount of detergent is used. matic foam absorption system has been >>> Put the detergent in the correct com- activated due to too much detergent us- partment. Do not mix the bleaching agent age.
Page 37
• Draining hose is folded. >>> Check the • The detergent in the main wash compart- drain hose. ment got wet while taking in the prewash water. Holes of the detergent compart- Laundry became stiff after washing. (**) ment are blocked. >>> Check the holes •...
Therefore, please be advised that trary, such attempts by end-users may repairs by professional repairers (who cause safety issues and damage the are not authorized by Beko ) shall void product and subsequently cause fire, flood, the guarantee. electrocution and serious personal injury to occur.
Page 39
gistered professional repairers: motor, pump assembly, main board, motor board, display board, heaters etc. The manufacturer/seller cannot be held li- able in any case where end-users do not comply with the above The spare part availability of the washing machine or washer-dryer that you pur- chased is 10 years.
Page 40
If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of ori- ginal purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manu- facturer”) agrees to extend the guarantee for the product in writing.
Page 41
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Beko offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replace- ment is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
Page 42
In order to activate the 10 year guarantee you MUST register the appliance within 90 days of the original purchase date. You can register by first visiting Beko.co.uk/register and by following the online instruc- tions.
Page 43
Further details are available at http://www.beko.co.uk/cookie-and-pri- vacy. 13. These Terms and Conditions are governed by the laws of England and Wales; manu- facturer: Beko plc, Beko House, 1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578. HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Please keep your purchase receipt or other proof of purchase details in a safe place;...
Page 44
Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register. EN / 44...