Operating Instructions T 9822 Gas Dryer en - US, CA To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 07 759 020...
Page 3
,WARNING For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death. Do not store or use gasoline or other flammable – vapors and liquids in the vicinity of this or any other appliance.
It is essential to read all instructions cleaned, washed, soaked or spotted before using the appliance. with gasoline, dry-cleaning solvents Do not allow children to play on or in or other flammable or explosive the appliance. Close supervision is substances. They may give off necessary when the appliance is used vapors that could ignite or explode.
Page 6
Check with your building inspector for a properly grounded. riskless use to avoid a low pressure of Do not modify the plug provided 4 Pa or more. with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
(e.g. wall vent duct, louvered wall vent, bends, etc.) if enough air gets SAVE THESE through. Lint can collect and block the air flow. If an exhaust hose is already INSTRUCTIONS installed, it should be checked before connected to the dryer.
Control panel Program buttons Status indicator To select a drying program Shows the current cycle of the drying program Options buttons Special features to enhance a drying Start/Stop button program Starts and stops a program, or if pressed and held in cancels a Check Filter/Vent indicator program.
First use Metal components of the dryer's gas burner have a protective coating which may give off a slight odor the first time the appliance is turned on. The smell will dissipate after a short time and does not indicate a faulty...
– The fine cotton fabric or down filled Clean the drum interior before the items tends to shrink. first use. – Dry pure linen items only if it is advised on the fabric care label. The surface of the fabric otherwise tends to become "rough".
^ Sort the laundry by desired dryness, fabric, size and similar residual moisture after spinning to assure even drying results. Do not dry items that may melt or ignite in the dryer such as plastics or rubber. They could melt and damage the laundry.
Page 12
They might get entangled which The laundry basket is designed in such could damage the laundry basket a way that it does not turn with the drum and the drum. and avoids strain on the drying item. Drying with the laundry basket is only possible with the programs "45 min.
– The respective program indicator lights. The lint filter must always be – "Options" indicators may be lit inserted in the door opening. (Memory function). ^ Close the door with a firm swing and push it closed.
An signal sounds at the end of a program in intervals for up to 1 hour. The buzzer can be turned on or off after the program starts. The constant tone to signal a fault is independent from the turned on or off buzzer.
5. Start the program Before the end of a program During the program selection the The heating phase is followed by the "Start/Stop" indicator flashes meaning cooling phase which cools the laundry that the program can be started. ("Cooling Down" indicator). Only after the cooling phase has ended has the program finished.
Changing a running program laundry A running program cannot be changed (protection from accidental changes). The "End" indicator will light at the end of the program and the buzzer will To select a different program the sound if it was selected.
Quick Guide Remove this guide for easy reference To prevent accidents and appliance damage read these instructions before installation or use.
Page 18
Quick Guide 1. Prepare and sort the laundry With the laundry basket ^ Check for damages and foreign Reduce the load size to ½ of a objects. normal load. ^ Close zippers, hooks and eyelets. Drying with the laundry basket is only ^ Tie up belts and apron ties.
Page 19
Quick Guide 3. Select a program 6. Program end - Unload the laundry The "End" indicator lights. ^ Press the desired program button. 4. Select an option ^ Open the door. ^ Select an option button, if desired. ^ Remove the laundry/laundry basket.
Page 20
Options: Turbo or Gentle, Buzzer Final drying of multi-layer fabrics, with Hand iron / Rotary iron unique drying characteristics Cotton or linen fabrics to be left damp e.g. jackets, pillows and voluminous for easier ironing. e.g. table cloths, textiles. bed linens, starched laundry.
T-Shirts, underwear, cotton bed linens, baby clothing, etc. Options Turbo or Gentle, Buzzer Hand iron Items Cotton or linen fabrics to be left damp for easier ironing e.g. table cloths, bed linens, starched laundry, etc. Options Turbo or Gentle, Buzzer Rotary iron Items Cotton or linen fabrics to be left damp for easier ironing.
Page 22
Woolen fabrics Note – Reduce the load size to 1/3 of a normal load. – Woolen items will be fluffed for a short time, but not completely dried. – Remove the items immediately after the program end and allow them to air dry.
Frequently asked questions Repairs to electrical and gas appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The following section will help you avoid placing a service call by identifying...
Page 24
See "Dryer Care". The program runs too long or stops. Important: To fix the following problems, open and close the dryer door. The air supply is insufficient. Open a window or door to increase air flow. The lint filter is clogged with lint.
This is a technical fault. Contact Technical Service. The program is canceled. The "Drying", "Rotary Iron", "Hand Iron", and "Normal" indicators flash. A new program start is not possible and the indicators will continue to flash. This is a technical fault. Contact Technical Service.
Page 26
– Start a program. If the problem persists call Technical Service. The laundry is pressed on the door and below the door. The restriction insert in the vent – Reinsert the restriction insert in the vent opening at the rear of the dryer opening.
After sales service Repairs MieleCare In the event of a fault which you cannot (USA only) fix yourself, please contact the service MieleCare, our Extended Service number on the back of this manual. Contract program; gives you the When contacting Technical Service,...
Dryer Care Cleaning the lint filter The lint is collected by the lint filter in the door opening. The lint filter must be cleaned after every program. ^ Clean the lint filter whenever the "Check Filter/Vent" indicator comes ^ Clean visible lint from the dryer interior.
^ The exterior, door, control panel and laundry basket can be cleaned with warm water and liquid dish soap applied with a soft sponge. ^ Wipe dry using a soft cloth. ^ The door gasket can be wiped with a damp cloth.
^ Open the door. ^ Flip the cover up. The lighting is in the drum opening in ^ Tighten the screw. the upper right-hand corner. Make sure the bulb cover is securely closed to prevent a short circuit or penetrating moisture.
Ensure that a discarded dryer presents no danger to children. When being To prevent suffocation, ensure that any stored for disposal remove the door to plastic wrappings, bags, etc. are the drying compartment. disposed of safely and kept out of the reach of children.
Page 36
Alteration rights reserved / 4310 M.-Nr. 07 759 020 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.