Table of Contents
Advertisement
Unsuitable cleaning agents
Contact with unsuitable cleaning
agents can alter or discolour all
surfaces. All surfaces are susceptible
to scratching. Scratches on glass
can in some circumstances lead to
breakage.
Remove all cleaning agent residues
immediately. Make sure you remove
any spillages or splashes of descaler
immediately.
To avoid damaging the surfaces, do not
use:
- Cleaning agents containing soda,
ammonia, acids or chlorides
- Solvent-based cleaning agents
- Cleaning agents containing descaling
agents (unsuitable for cleaning the
casing)
- Stainless steel cleaners
- Dishwasher cleaning agents
(unsuitable for cleaning the casing)
- Glass cleaning agents
- Cleaning agents for ceramic glass
hobs
- Oven cleaners
- Abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
- Hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents
- Eraser stain remover blocks
Cleaning and care
- Sharp metal scrapers
- Steel wool or stainless steel wire
scourers
Waste container, drip tray and
drip tray cover
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container.
Danger of burning.
If the rinsing process has just
finished, wait a while before
removing the drip tray from the
machine. The water used for rinsing
will continue to run out of the coffee
spouts for a while.
Pull the drip tray carefully out of the
machine. Take the lid off.
Empty the drip tray and the waste
container.
41
Advertisement
Table of Contents
