Table of Contents
Advertisement
Kitchen timer
You can set a timer for activities that are
independent of the cooktop.
Safety shut-off
You can set a time after which the
cooking zone will reduce automatically
to power level 1. This function can be
used on all cooking zones at the same
time.
System lock
If the system lock is activated, then the
cooktop cannot be switched on.
Safety lock
The safety lock is activated while the
cooktop is switched on. When the
safety lock is activated, the cooktop
can only be operated under certain
conditions.
Keeping warm
This function enables food to be kept
warm after it has finished cooking.
The maximum duration for keeping food
warm is 2 hours.
Wipe protection
The cooktop sensor controls can be
locked for 20 seconds, e.g., to remove
soiling. The sensor control is not
locked.
Programming
You can adapt the programming of the
cooktop to your personal needs.
Demo mode
This function enables the cooktop to be
demonstrated in dealer showrooms
without heating up.
Residual heat indicator
If a cooking zone is still hot, the residual
heat indicator will light up after it has
been switched off. Depending on the
temperature, a dot will appear above
power levels 1, 2, and 3.
The dots in the residual heat indicator
go out one by one as the cooking zones
cool down. The last dot only goes out
when the cooking zone is safe to touch.
Overview
33
Advertisement
Table of Contents
