Page 2
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS This product must be installed by an installation professional from an LG authorised service center. Any issues stemming from an installation by an unauthorised person is the responsibility of the user and will not be covered by warranty.
Page 3
SAFETY INSTRUCTIONS - Using an unsuitable cord, or having a non-professional work on the electricals may result in fire or electrical shock. • Do NOT place the product near a fire source. - It may result in combustion. • If the product is installed in a hospital or a communication base station, shield the product from electrical noise by providing sufficient protective equipment.
Page 4
SAFETY INSTRUCTIONS • If the product has been submerged in water, you should contact a service center. - Follow the below precautions properly; else it might result in a fire disaster, risk of incurring electric shock injuries, product malfunctioning or damage to property. •...
Page 5
- If a non-standard adapter is used, the product may malfunction. The adaptor is not provided with the ACP 5 package sold in the U.S. • Be careful not to drop or damage the product when moving it.
Page 6
ACP 5 package sold in the U.S. AN ARBITRATION PROVISION By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis.
Page 7
ACP 5 FUNCTIONS AND SPECIFICATION ACP 5 is the central controller that can manage up to 256 equipments in one space individually or as combined. ACP 5 can monitor or control the equipments installed in each room of the building from the places such as the management office of a building or the administration office of a school.
Page 8
⑧ USB port and Lonworks Commission with U60FT module ⑨ Power switch Switch to turn on or off the power of the ACP 5 ⑩ Ethernet port Ethernet port to connect to internet and AC Manager 5 ⑪ SD card slot...
Page 9
ACP 5 FUNCTIONS AND SPECIFICATION ACP 5 Hardware specification ACP 5 hardware specification is as follows. Category Description ① Operating temperature 0 °C(32 °F) ~ 40 °C(104 °F) ② Rated voltage 24 V~ ③ Rated current Max 1 A • Ethernet 10 / 100 BASE-T •...
Page 10
Installing ACP 5 This chapter describes how to install the ACP 5 to use. In order to use the ACP 5, the installation should be performed by the following order. STEP 1. Check the cautions during the ACP 5 installation Before installing the ACP 5, check the cautions.
Page 11
Gateway, and Net mask must be requested connected to one ACP 5. to the person in charge of the network of One ACP 5 can be connected up to 256 indoor the corresponding site. units. With ACS I/O interlocking, you can connect 128 indoor units and 16 I/O modules.
Page 12
Configuration Address: 41 When the ACP 5 is interconnected with the AC Manager 5, the ERV can be installed together and controlled. The above figure shows the example that sets the address of 11 to the ERV and connects to the ACP 5.
Page 13
RS-485, and LAN cable. considering the environment of the site. • Install DIN RAIL. • Hook the top part of the ACP 5 on DIN RAIL. • Push the main body of the ACP 5 until you hear the sound of installation.
Page 14
INSTALLING ACP 5 Fixing the ACP 5 to the wall ACP 5 can be installed by fixing to the wall. To install the ACP 5 in an adequate place, proceed according to the following explanation. It explains here on how to install...
Page 15
ACP 5 should be set by driving the ACP 5. The Use Ethernet cable to connect to LAN port of following information should be set for using the ACP 5.
Page 16
Turn on the ACP 5 to set the network environment of the ACP 5. When the power switch is turned on, the ACP 5 booting screen is displayed on the LCD as shown at the following figure, and when booting is completed, the initial ACP 5 screen is displayed.
Page 17
The following explains how to log in and out of ACP 5. ACP 5, can be controlled either by the equipment or the web. If you enter the IP address of the ACP 5 in the address bar of the command window of web browser (Run>cmd>ipconfig) without the installation of another program, the central control program ACP 5 Web server is executed automatically.
Page 18
User manual You can view the user manual as follows. In ACP 5 log-in screen, input ID and password and touch [Log in] button. Press 'Help' at the top right side of ACP 5 screen. - The user manual is displayed.
Page 19
Web GUI does Please check LAN cable and the power supply of Hub. not run. ACP 5 in the lock feature is enabled, the remote control Indoor remote control does function is not set.Peak control state must function setting not work.
Page 20
LIMITED WARRANTY (USA) WARNING • INGESTION HAZARD: This product contains a button cell or coin battery. h The icon 1) means the above warning text. • DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
Page 21
If you and LG are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in accordance with the procedure set out herein.
Page 22
Limited Warranty. Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either (i) sending an...