Brother DCP-T238 Product Safety Manual
Hide thumbs
Also See for DCP-T238:
- Reference manual (4 pages) ,
- Online user's manual (240 pages) ,
- Quick setup manual (4 pages)
Advertisement
Quick Links
Product Safety Guide
Read this guide before attempting to operate the product, or before
attempting any maintenance. Failure to follow these instructions may result
in an increased risk of personal injury or damage to property, including
through fire, electrical shock, burns or suffocation. Brother shall not be liable
for damage caused where the product owner has failed to follow
instructions set out in this guide.
How to use this guide:
1. Read the whole guide before using your product. Keep the User's Guide
in a secure place for future reference.
2. Carefully follow the instructions set out in this guide and always ensure
that you follow all warnings and instructions marked on the product.
3. If you have concerns about how to use your product after reading this
guide, contact Brother customer service or your local Brother dealer.
4. To ensure you understand all of the instructions, study the Symbols and
Conventions used in the documentation.
5. CAUTION:
Before using this product, read carefully these instructions for correct
operation.
For more advanced instructions, information, and product specifications,
see the Online User's Guide at support.brother.com/manuals.
DCP-T230 / DCP-T236 / DCP-T238 / DCP-T430W / DCP-T435W /
DCP-T436W / DCP-T439W / DCP-T536DW / DCP-T730DW / DCP-T735DW /
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan
DCP-T830DW / DCP-T835DW / MFC-T930DW
Brother Industries, Ltd.
1
Advertisement
Related Manuals for Brother DCP-T238
Summary of Contents for Brother DCP-T238
- Page 1 Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner has failed to follow instructions set out in this guide.
- Page 2 Choose a Safe Location for Your Product ........4 Connect the Product Safely............6 Use the Product Safely ..............8 Important Safety Instructions.............19 Product Warranty & Liability ............21 Trademarks ..................24 Brother Customer Service ............24 Unlawful Use of Copying or Scanning Equipment (Products with the scanning function only) ..........25 Disclaimer ...................25...
- Page 3 Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING This icon indicates that flammable sprays must not WARNING indicates a potentially be used. hazardous situation which, if not This icon indicates that avoided, could result in death or...
- Page 4 The information contained in these manuals may be subject to change. For the latest manuals, visit support.brother.com. ©2024 Brother Industries, Ltd. All rights reserved. Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and...
- Page 5 Do not install or use in areas where explosive or electrically conductive dusts are generated. DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses, moisture, or dust. Doing so may create a risk of an electrical shock, short circuit, or fire, causing damage to the product and/or rendering it inoperable.
- Page 6 Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the product is in a safe location where it cannot be accidentally knocked over, which could cause injury to you or others and serious damage to the product.
- Page 7 Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you could cause a short circuit, which may create the risk of fire. There are high-voltage electrodes inside the product. Before you access the inside of the product, including for routine maintenance such as cleaning, make sure you have unplugged the telephone line cord first (models with the fax function only) and then the power cord from...
- Page 8 DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to Brother customer service or your local Brother dealer. If the product has been dropped or the casing has been damaged, there may be the possibility of an electrical shock.
- Page 9 If water, other liquids, or metal objects get inside the product, immediately unplug the product from the electrical socket and contact Brother customer service or your local Brother dealer. DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical shock from lightning.
- Page 10 If the product becomes unusually hot, releases smoke, generates any strong smells, or if you accidentally spill any liquid on it, immediately unplug the product from the electrical socket. Contact Brother customer service or your local Brother dealer. (Models with the fax function only) Use caution when installing or modifying telephone lines.
- Page 11 Installation must be performed correctly according to the Quick Setup Guide. • Brother strongly recommends that you DO NOT use any type of extension cord. • This product should be positioned so that nothing pinches or constricts the power cord.
- Page 12 CAUTION Wait until pages have exited the product before picking them up. Failure to do this may cause injury to your fingers by trapping them inside the machine.
- Page 13 To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. (DCP-T830DW/DCP-T835DW/ MFC-T930DW) (DCP-T830DW/DCP-T835DW/ * Example for DCP-T536DW MFC-T930DW) (DCP-T830DW/DCP-T835DW/ MFC-T930DW)
- Page 14 When changing the tray size from the Legal size to the original size, be careful not to trap your fingers in the gaps or slots in the bottom of the tray. It may cause injury to you. Do not put your fingers in the areas shown in the illustrations except when removing jammed paper or cleaning the machine.
- Page 15 DO NOT carry the product by holding the areas shown in the illustrations. Doing this may cause the product to slip out of your hands and may result in injury. (DCP-T830DW/DCP-T835DW/ MFC-T930DW) (DCP-T230/DCP-T236/ (DCP-T830DW/DCP-T835DW/ DCP-T238/DCP-T430W/ MFC-T930DW) DCP-T435W/DCP-T436W/ DCP-T439W/DCP-T536DW/ DCP-T730DW/DCP-T735DW)
- Page 16 Only carry the machine by placing your hands under the entire machine. Turn off the machine, unplug the power cord from the machine, and then hold the bottom of the machine, as illustrated. When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product.
- Page 17 If the ink contacts your skin or gets into your eyes or mouth, follow these steps immediately: • If your skin comes into contact with the ink, wash your skin with water and soap immediately. • If the ink gets into your eyes, rinse them with water, and consult your doctor immediately.
- Page 18 Keep your hands away from those areas when the parts are moving, or else injury may result. DO NOT remove or damage the caution or warning label inside the product. (DCP-T830DW/DCP-T835DW/MFC-T930DW) (DCP-T230/DCP-T236/DCP-T238/DCP-T430W/DCP-T435W/ DCP-T436W/DCP-T439W/DCP-T536DW/DCP-T730DW/ DCP-T735DW) IMPORTANT • A distinct change in the product’s performance may indicate a need for service.
- Page 19 electricity. It could disrupt the power supply. Disruption of the power supply may also delete information from the product's memory, and repeated cycling of the power supply can damage the product. • DO NOT put any objects on top of the product. Doing so may cause the product to malfunction.
- Page 20 Please refer all servicing to our Authorized Service Personnel, or you may contact the Brother Dealer for Service. 16. Unplug this product from the wall outlet and refer servicing to Authorized Service Personnel under the following conditions: •...
- Page 21 • If the product has been dropped or the casing has been damaged. • If the product exhibits a distinct change in performance, indicating a need for service. Product Warranty & Liability Nothing in this guide shall affect any existing product warranty or be construed as granting any additional product warranty.
- Page 22 • Out-of-band emission power (Outside the 2.4 to 2.4835 GHz frequency band) ≤ -80 dBm / Hz (EIRP) • Spurious emission (radiation) power (Outside the range of the corresponding carrier ± 2.5 times the channel bandwidth): ≤ -36 dBm / 100 kHz (30 - 1000 MHz) ≤...
- Page 23 • Carrier frequency tolerance: 20 ppm • Out-of-band emission power (EIRP): ≤ -80 dBm / Hz (≤ 5725 MHz or ≥ 5850 MHz) • Spurious emission (radiation) power: ≤ -36 dBm / 100 kHz (30 - 1000 MHz) ≤ -40 dBm / 1 MHz (2400 - 2483.5 MHz) ≤...
- Page 24 Visit support.brother.com for contact information for your local Brother office. Service Centre Locations For service centres in your country, contact your local Brother office. Address and telephone contact information for local offices can be found at support.brother.com by selecting your region and country.
- Page 25 Works of art should be considered the equivalent of copyrighted works. Disclaimer Brother disclaims any warranties with respect to avoidance, mitigation or non-occurrence of any breakdowns, malfunctions, system crashes, virus infections, damage and disappearances of data, and any other kind of errors by using this product.
- Page 26 OR INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES OF THE CUSTOMERS OR ANY OTHER THIRD PARTY.
- Page 27 These machines are approved for use in the country of purchase only. Local Brother companies or their dealers may only support machines purchased in their own countries. Month of publication: 06/2024 CHN-ENG Version 0...