Removing An External 3.5-Inch Drive - HP Pro 3000 SFF Maintenance And Service Manual
Business pcs
Hide thumbs
Also See for Pro 3000 SFF:
- Hardware reference manual (46 pages) ,
- Quick setup and getting started manual (21 pages)
Table of Contents
Advertisement
9.
Push in the latch holding the drive cage upright (1) and lower the drive cage all the way down
(2).
Figure 7-26
10.
Connect the SATA data cable to the white system board connector.
11.
Connect the power cable (1) and data cable (2) to the rear of the optical drive.
Figure 7-27
12.
Replace the front bezel and access panel.
13.
Reconnect the power cord and turn on the computer.
14.
Lock any security devices that were disengaged when the access panel was removed.
The system automatically recognizes the drive and reconfigures the computer.
Removing an External 3.5-inch Drive
CAUTION:
computer.
108 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Lowering the Drive Cage
Connecting the Power and Data Cables
All removable media should be taken out of a drive before removing the drive from the
Hide quick links:
Advertisement
Table of Contents
