Miele K 2602 Vi Operating And Installation Instructions page 93
Hide thumbs
Also See for K 2602 Vi:
- Operating and installation instructions (108 pages) ,
- Operator and maintenance manual (108 pages)
Advertisement
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
Replacing the Active AirClean
filters
The Active AirClean filters in the refri-
gerator section need to be replaced ap-
prox. every 6 months.
Change Active AirClean filter
the display.
Confirm the message with OK.
To remove the holder for the Active
AirClean filters, press against the re-
tainers on both sides of the holder
Remove the used Active AirClean fil-
To replace the holder, press against
Once the Active AirClean filters have
been replaced, the Active AirClean filter
display must be reset using Settings
mode on the display (see "Selecting
additional settings – Resetting the
will appear on
play Active AirClean filter
Cleaning and care
from the rear and pull the holder
downwards diagonally from the
frame.
ters and place the new Active
AirClean filters with the surrounding
edge pointing downwards in the
holder.
the retainers on both sides of the
holder from the rear and clamp it into
the gap on the frame from below.
The holder can be fixed under any
shelf in the refrigerator section.
New Active AirClean filters can be ob-
tained from the Miele Customer Ser-
vice Department, your Miele dealer or
the Miele website.
Dis-
").
93
Advertisement
