Installation
Securing the plinth ventilation grille
and plinth panel
Click the plinth ventilation grille
onto the bottom of the appliance
plinth.
If necessary, cut the plinth panel to
the required length and height (cut
along the lower edge of the plinth
where it touches the floor).
Secure the plinth panel to the bottom
of the plinth ventilation grille.
46
Limiting the opening angle of the ap-
pliance door
The door hinges are set ex works to en-
able the appliance door to be opened
wide.
If the appliance door hits an adjacent
wall when opened, for example, the
opening angle can be limited to 90°.
Open the appliance door.
Insert the pin into the lower hinge
from above.
This will limit the opening angle of the
appliance door to 90°.