hit counter code
Compaq 8000 - Elite Convertible Minitower PC Hardware Reference Manual
  1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Desktop
  5. 8000 - Elite Convertible Minitower PC
  6. Hardware reference manual
Compaq 8000 - Elite Convertible Minitower PC Hardware Reference Manual

Compaq 8000 - Elite Convertible Minitower PC Hardware Reference Manual

Hardware reference guide - hp compaq 8000 elite convertible minitower pc
Hide thumbs Also See for 8000 - Elite Convertible Minitower PC:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
Hardware Reference Guide
HP Compaq 8000 Elite Convertible Minitower Business PC

Advertisement

Table of Contents
loading

Related Manuals for Compaq 8000 - Elite Convertible Minitower PC

Summary of Contents for Compaq 8000 - Elite Convertible Minitower PC

  • Page 1 Hardware Reference Guide HP Compaq 8000 Elite Convertible Minitower Business PC...
  • Page 2 Hewlett-Packard Company. Hardware Reference Guide HP Compaq 8000 Elite Convertible Minitower Business PC First Edition (November 2009) Document part number: 588913-001...

  • Page 3: About This Book

    About This Book This guide provides basic information for upgrading this computer model. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
  • Page 4 About This Book ENWW...

  • Page 5: Table Of Contents

    Table of contents 1 Product Features Standard Configuration Features ......................1 Front Panel Components ........................2 Media Card Reader Components ......................3 Rear Panel Components ........................4 Keyboard .............................. 5 Using the Windows Logo Key ....................5 Serial Number Location ........................7 2 Hardware Upgrades Serviceability Features .........................
  • Page 6 Changing from a Desktop to a Minitower Configuration ..............41 Appendix A Specifications Appendix B Battery Replacement Appendix C External Security Devices Installing a Security Lock ........................49 HP/Kensington MicroSaver Security Cable Lock ............... 49 Padlock ..........................50 HP Business PC Security Lock ..................50 Front Bezel Security ......................

  • Page 7: Product Features

    Product Features Standard Configuration Features The HP Compaq Convertible Minitower features may vary depending on the model. For a complete listing of the hardware and software installed in the computer, run the diagnostic utility (included on some computer models only).

  • Page 8: Front Panel Components

    Front Panel Components Drive configuration may vary by model. Some models have a bezel blank covering one or more drive bays. Figure 1-2 Front Panel Components Table 1-1 Front Panel Components 5.25-inch Optical Drives Microphone/Headphone Connector 5.25-inch Media Card Reader (optional) Power On Light Dual-State Power Button Headphone Connector...

  • Page 9: Media Card Reader Components

    Media Card Reader Components The media card reader is an optional device available on some models only. Refer to the following illustration and table to identify the media card reader components. Figure 1-3 Media Card Reader Components Table 1-2 Media Card Reader Components Slot Media ●...

  • Page 10: Rear Panel Components

    Rear Panel Components Figure 1-4 Rear Panel Components Table 1-3 Rear Panel Components Power Cord Connector Line-Out Connector for powered audio devices (green) PS/2 Keyboard Connector (purple) Line-In Audio Connector (blue) DisplayPort Monitor Connector PS/2 Mouse Connector (green) VGA Monitor Connector Serial Connector Universal Serial Bus (USB) RJ-45 Network Connector...

  • Page 11: Keyboard

    Keyboard Figure 1-5 Keyboard Components Table 1-4 Keyboard Components Function Keys Perform special functions depending on the software application being used. Editing Keys Includes the following: Insert, Home, Page Up, Delete, End, and Page Down. Status Lights Indicate the status of the computer and keyboard settings (Num Lock, Caps Lock, and Scroll Lock).
  • Page 12 Table 1-5 Windows Logo Key Functions (continued) Windows Logo Key Displays or hides the Start menu Windows Logo Key + Displays the Desktop Windows Logo Key + Minimizes all open applications Shift + Windows Logo Key + Undoes Minimize All Windows Logo Key + Launches My Computer Windows Logo Key +...

  • Page 13: Serial Number Location

    Table 1-5 Windows Logo Key Functions (continued) Windows Logo Key + (on numpad) Zooms in Windows Logo Key + (on numpad) Zooms out Serial Number Location Each computer has a unique serial number and a product ID number that are located on the top cover of the computer.

  • Page 14: Hardware Upgrades

    Hardware Upgrades Serviceability Features The computer includes features that make it easy to upgrade and service. No tools are needed for most of the installation procedures described in this chapter. Warnings and Cautions Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and warnings in this guide.

  • Page 15: Unlocking The Smart Cover Lock

    Unlocking the Smart Cover Lock NOTE: The Smart Cover Lock is an optional feature included on some models only. The Smart Cover Lock is a software-controllable cover lock, controlled by the setup password. This lock prevents unauthorized access to the internal components. The computer ships with the Smart Cover Lock in the unlocked position.
  • Page 16 Use the Smart Cover FailSafe Key to remove the two tamper-proof screws that secure the Smart Cover Lock to the chassis. Figure 2-1 Removing the Smart Cover Lock Screws You can now remove the access panel. See Removing the Computer Access Panel on page To reattach the Smart Cover Lock, secure the lock in place with the tamper-proof screws.

  • Page 17: Removing The Computer Access Panel

    Removing the Computer Access Panel Remove/disengage any security devices that prohibit opening the computer. Remove all removable media, such as compact discs or USB flash drives, from the computer. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices.

  • Page 18: Replacing The Computer Access Panel

    Replacing the Computer Access Panel Lay the computer down on its large base for greater stability. Slide the lip on the front end of the access panel under the lip on the front of the chassis (1) then press the back end of the access panel onto the unit so that it locks into place (2). Figure 2-3 Replacing the Computer Access Panel Chapter 2 Hardware Upgrades...

  • Page 19: Removing The Front Bezel

    Removing the Front Bezel Remove/disengage any security devices that prohibit opening the computer. Remove all removable media, such as compact discs or USB flash drives, from the computer. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices.

  • Page 20: Removing Bezel Blanks

    Removing Bezel Blanks Remove/disengage any security devices that prohibit opening the computer. Remove all removable media, such as compact discs or USB flash drives, from the computer. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices.

  • Page 21: Replacing The Front Bezel

    Replacing the Front Bezel Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1) then rotate the top side of the bezel onto the chassis (2) and snap it into place. Figure 2-6 Replacing the Front Bezel ENWW...

  • Page 22: Installing Additional Memory

    Installing Additional Memory The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3- SDRAM) dual inline memory modules (DIMMs). DIMMs The memory sockets on the system board can be populated with up to four industry-standard DIMMs. These memory sockets are populated with at least one preinstalled DIMM.

  • Page 23: Populating Dimm Sockets

    Populating DIMM Sockets There are four DIMM sockets on the system board, with two sockets per channel. The sockets are labeled XMM1, XMM2, XMM3, and XMM4. Sockets XMM1 and XMM2 operate in memory channel A. Sockets XMM3 and XMM4 operate in memory channel B. Figure 2-7 DIMM Socket Locations Table 2-1...

  • Page 24: Installing Dimms

    will have more memory than the other, the larger amount should be assigned to Channel A. For example, if you are populating the sockets with one 2-GB DIMM, and three 1-GB DIMMs, Channel A should be populated with the 2-GB DIMM and one 1-GB DIMM, and Channel B should be populated with the other two 1-GB DIMMs.
  • Page 25 Open both latches of the memory module socket (1), and insert the memory module into the socket (2). Figure 2-8 Installing a DIMM NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.

  • Page 26: Removing Or Installing An Expansion Card

    Removing or Installing an Expansion Card The computer has three standard full-height PCI expansion slots, one PCI Express x1 expansion slot, one PCI Express x16 expansion slot, and one PCI Express x16 expansion slot that is downshifted to a x4 slot. Figure 2-9 Expansion Slot Locations Table 2-2...
  • Page 27 CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. Remove the computer access panel.
  • Page 28 If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Lift the card straight up to remove it. Be sure not to scrape the card against other components. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.
  • Page 29 Store the removed card in anti-static packaging. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation.

  • Page 30: Drive Positions

    Drive Positions Figure 2-15 Desktop and Minitower Drive Positions Table 2-3 Drive Positions Three 5.25-inch external drive bays for optional drives (optical drives and media card reader shown) Three 3.5-inch internal hard drive bays NOTE: The drive configuration on your computer may be different than the drive configuration shown above. The bottom 5.25-inch drive bay has a shorter depth than the upper two bays.

  • Page 31: Removing A Drive From A Drive Bay

    Removing a Drive from a Drive Bay CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. Remove/disengage any security devices that prohibit opening the computer. Remove all removable media, such as compact discs or USB flash drives, from the computer. Turn off the computer properly through the operating system, then turn off any external devices.
  • Page 32 ● If you are removing a media card reader, disconnect the USB cable from the system board. If the media card reader has a 1394 port, disconnect the 1394 cable from the PCI card. Figure 2-17 Disconnecting the Media Card Reader USB Cable Figure 2-18 Disconnecting the Media Card Reader 1394 Cable Chapter 2 Hardware Upgrades...
  • Page 33 Remove the drive from the drive bay as follows: ● To remove a 5.25-inch drive in the desktop configuration, press down on the yellow drivelock mechanism (1) and slide the drive from the drive bay (2). CAUTION: When the yellow drivelock is pressed, all the external 5.25-inch drives are released so do not tilt the unit and allow the drives to fall out.
  • Page 34 ● To remove a hard drive from and internal 3.5-inch drive bay, pull up on the green hard drive drivelock mechanism (1) for that drive and slide the drive from the drive bay (2). Figure 2-21 Removing a Hard Drive Store the removed drive in anti-static packaging.

  • Page 35: Installing Additional Drives

    Installing Additional Drives When installing additional drives, follow these guidelines: ● The primary Serial ATA (SATA) hard drive must be connected to the dark blue SATA connector on the system board labeled SATA0. ● Connect the first SATA optical drive to the white SATA connector on the system board labeled SATA1.

  • Page 36: System Board Drive Connections

    CAUTION: To prevent loss of work and damage to the computer or drive: If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode. Before handling a drive, ensure that you are discharged of static electricity.

  • Page 37: Installing A 5.25-Inch Drive Into An External Drive Bay

    Installing a 5.25-inch Drive into an External Drive Bay Remove/disengage any security devices that prohibit opening the computer. Remove all removable media, such as compact discs or USB flash drives, from the computer. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices.

  • Page 38: Installing A 3.5-Inch Sata Hard Drive Into An Internal Drive Bay

    CAUTION: The bottom 5.25-inch drive bay has a shorter depth than the upper two bays. The bottom bay supports a half-height drive or other device that is no more than 14.5 cm (5.7 inches) in depth. Do not try to force a larger drive, such as an optical drive, into the bottom bay. This could cause damage to the drive and the system board.
  • Page 39 Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet.

  • Page 40: Removing And Replacing A Removable 3.5-Inch Sata Hard Drive

    Connect the power cable (1) and data cable (2) to the rear of the hard drive. Figure 2-28 Connecting the Power Cable and Data Cable to a SATA Hard Drive Connect the opposite end of the data cable to the appropriate system board connector. NOTE: If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems.
  • Page 41 Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2). Figure 2-29 Removing the Carrier Cover Remove the adhesive strip that secures the thermal sensor to the top of the hard drive (1) and move the thermal sensor away from the carrier (2).
  • Page 42 Remove the four screws from the bottom of the hard drive carrier. Figure 2-31 Removing the Security Screws Slide the hard drive back to disconnect it from the carrier then lift it up and out of the carrier. Figure 2-32 Removing the Hard Drive Chapter 2 Hardware Upgrades ENWW...
  • Page 43 Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all the way into the connector on the carrier's circuit board. Figure 2-33 Replacing the Hard Drive Replace the four screws in the bottom of the carrier to hold the drive securely in place.
  • Page 44 Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2). Figure 2-35 Replacing the Thermal Sensor Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover in place (2).

  • Page 45: Changing From A Minitower To A Desktop Configuration

    Changing from a Minitower to a Desktop Configuration Remove/disengage any security devices that prohibit opening the computer. Remove all removable media, such as compact discs or USB flash drives, from the computer. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices.
  • Page 46 Gently slide the drive into the uppermost available bay until it snaps into place. When the drive is properly inserted, the drivelock will secure it. Repeat this step for each drive. Figure 2-38 Installing a Drive in the Desktop Configuration CAUTION: The bottom 5.25-inch drive bay has a shorter depth than the upper two bays.

  • Page 47: Changing From A Desktop To A Minitower Configuration

    Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the bezel. Figure 2-39 Changing from a Minitower to a Desktop Configuration Replace the front bezel and computer access panel. Reconnect the power cord and turn on the computer. Lock any security devices that were disengaged when the computer access panel was removed.
  • Page 48 To release the drives from the 5.25-inch drive bay, press down on the short yellow drivelock as shown (1). While pressing the drivelock, pull the drives out of the drive bay (2). Figure 2-40 Releasing the 5.25-inch Drives from the Drive Bays (Desktop) Gently slide the drive into the uppermost available bay until it snaps into place.
  • Page 49 CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. Reposition the bezel blanks within the subpanel in the proper orientation for the minitower configuration.

  • Page 50: Appendix A Specifications

    Specifications Table A-1 Specifications Desktop Dimensions 7.0 in 17.78 cm Height 17.63 in 44.78 cm Width 17.5 in 44.45 cm Depth Tower Dimensions 17.63 in 44.78 cm Height 7.0 in 17.78 cm Width 17.5 in 44.45 cm Depth Approximate Weight 24.54 lb 11.15 kg Weight Supported (maximum distributed load in desktop...
  • Page 51 Table A-1 Specifications (continued) Power Supply 115V 230V Operating Voltage Range (STD PS) 90-264 VAC 90-264 VAC Operating Voltage Range (EPA 87/89/85% @ 20/50/100% 90-264 VAC 90-264 VAC load PS) 100-240 VAC 100-240 VAC Rated Voltage Range (STD PS) 100-240 VAC 100-240 VAC Rated Voltage Range (EPA 87/89/85% @ 20/50/100% load 50-60 Hz...

  • Page 52: Appendix B Battery Replacement

    Battery Replacement The battery that comes with the computer provides power to the real-time clock. When replacing the battery, use a battery equivalent to the battery originally installed in the computer. The computer comes with a 3-volt lithium coin cell battery. WARNING! The computer contains an internal lithium manganese dioxide battery.
  • Page 53 Depending on the type of battery holder on the system board, complete the following instructions to replace the battery. Type 1 Lift the battery out of its holder. Figure B-1 Removing a Coin Cell Battery (Type 1) Slide the replacement battery into position, positive side up. The battery holder automatically secures the battery in the proper position.
  • Page 54 Insert the new battery and position the clip back into place. Figure B-3 Removing a Coin Cell Battery (Type 3) NOTE: After the battery has been replaced, use the following steps to complete this procedure. Replace the computer access panel. Plug in the computer and turn on power to the computer.

  • Page 55: Appendix C External Security Devices

    External Security Devices NOTE: For information on data security features, refer to the Desktop Management Guide and the HP ProtectTools Security Manager Guide (some models) at http://www.hp.com. Installing a Security Lock The security locks displayed below and on the following page can be used to secure the computer. HP/Kensington MicroSaver Security Cable Lock Figure C-1 Installing a Cable Lock...

  • Page 56: Padlock

    Padlock Figure C-2 Installing a Padlock HP Business PC Security Lock Fasten the security cable by looping it around a stationary object. Figure C-3 Securing the Cable to a Fixed Object Appendix C External Security Devices ENWW...
  • Page 57 Thread the keyboard and mouse cables through the lock. Figure C-4 Threading the Keyboard and Mouse Cables Screw the lock to the chassis using the screw provided. Figure C-5 Attaching the Lock to the Chassis ENWW Installing a Security Lock...

  • Page 58: Front Bezel Security

    Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the lock. Use the key provided to disengage the lock. Figure C-6 Engaging the Lock Front Bezel Security The front bezel can be locked in place by installing a security screw provided by HP. To install the security screw: Remove/disengage any security devices that prohibit opening the computer.
  • Page 59 Remove the security screw from the inside of the front bezel. Figure C-7 Retrieving the Front Bezel Security Screw Replace the front bezel. Install the screw through the interior of the front of the chassis into the front bezel. The screw hole is located on the left edge of the chassis next to the top hard drive bay.

  • Page 60: Appendix D Electrostatic Discharge

    Electrostatic Discharge A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. Preventing Electrostatic Damage To prevent electrostatic damage, observe the following precautions: ●...

  • Page 61: Appendix E Computer Operating Guidelines, Routine Care And Shipping Preparation

    Computer Operating Guidelines, Routine Care and Shipping Preparation Computer Operating Guidelines and Routine Care Follow these guidelines to properly set up and care for the computer and monitor: ● Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. ●...

  • Page 62: Optical Drive Precautions

    Optical Drive Precautions Be sure to observe the following guidelines while operating or cleaning the optical drive. Operation ● Do not move the drive during operation. This may cause it to malfunction during reading. ● Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit.

  • Page 63: Index

    Index front bezel front bezel 52 access panel removing 13 HP Business PC Security locking and unlocking 9, 49 removing blanks 14 Lock 50 removing 11 replacing 15 padlock 50 replacing 12 security 52 Smart Cover Lock 9 audio connectors 2, 4 front panel components 2 media card reader battery replacement 46...
  • Page 64 rear panel components 4 removable hard drive replacing 34 removing battery 46 bezel blanks 14 computer access panel 11 drives from drive bay 25 expansion card 20 expansion slot cover 21 front bezel 13 media card reader 25 PCI card 22 PCI Express card 22 Smart Cover Lock 9 security...

Table of Contents