Related Manuals for Miele W 2514 WPS
Summary of Contents for Miele W 2514 WPS
- Page 1 Operating instructions for Washing machine W 2514 WPS To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 06 068 890...
-
Page 2: Caring For Our Environment
Caring for our environment Disposal of the packing Disposal of your old appliance material or machine The transport and protective packing Electrical and electronic appliances / has been selected from materials which machines often contain materials are environmentally friendly for disposal which, if handled or disposed of and can normally be recycled. -
Page 3: Table Of Contents
Contents Caring for our environment......... . 2 Disposal of the packing material . - Page 4 Contents Programme sequence ..........24 Changing the programme sequence .
- Page 5 The Miele Waterproof system ........
-
Page 6: Warning And Safety Instructions
The manufacturer is not liable for which the manufacturer cannot accept damage resulting from improper use or liability. Repairs should only be operation. undertaken by a Miele approved technician. Technical safety Ensure current is not supplied to the appliance until after maintenance or Before setting up the machine, repair work has been carried out. - Page 7 If the connection cable is faulty it of time (e.g. holiday), especially if there must only be replaced by a Miele is no floor drain (gully) in the immediate approved service technician to protect vicinity.
-
Page 8: Disposal Of Your Old Machine
If in children whilst you are operating the doubt, contact the Miele Customer Ser- machine. vice Dept. or your Miele Dealer. For machines with a ‘porthole’... -
Page 9: Description Of The Machine
Description of the machine Control panel a PROGRAMME buttons e- f SEQUENCE indicator lights with indicator lights show which section of the wash For selecting a washing programme. programme has been reached. b EXTRAS buttons g Buzzer button with indicator lights h CHECK lights Various Extra options can be added i Delay start button... -
Page 10: Display
Description of the machine Display Soak The following functions are shown in the If a soak period has been selected, this display: is added to the programme duration in the display to give a total running time. – programme duration (Time left display) Delay start –... -
Page 11: Before Using For The First Time
Before using for the first time Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the fluff filter is securely tightened to prevent the risk of water leaks during use. -
Page 12: Washing Environmentally And Economically
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy – Do not exceed the amounts of usage are determined by the size of detergent recommended by the the load. manufacturer on the packaging. To make the most out of your –... -
Page 13: How To Wash Correctly
How to wash correctly Brief instructions ^ Sort the laundry by colour and by care label. Most garments have a The headings numbered A, B, C, . . . textile care label in the collar or side show the operating sequence and can seam. - Page 14 How to wash correctly B Switch on the washing machine. D Select a programme C Load the drum ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning.
- Page 15 How to wash correctly Each press of the top button selects the Pressing the TEMPERATURE or SPIN EXTRAs in the following order: Intensive button changes your selection. or Intensive and Pre-wash or Intensive In some programmes the maximum and Soak or Pre-wash or Soak or no temperature and spin speed is limited.
- Page 16 How to wash correctly E Add detergent It is important to dispense the correct amount, because ..too little detergent results in: – Laundry not getting properly clean and over time becoming grey and hard to the touch. –...
- Page 17 How to wash correctly F Select Delay Start if using H Remove the laundry Delay start allows you to delay the start The Anti-crease/Finish indicator lamp of a programme from 30 minutes up to will flash at the end of the programme. a maximum of 24 hours, allowing you to ^ Press the Door button to open the make use of night-time economy...
-
Page 18: Extras
Extras Water plus You can use the EXTRAS buttons to augment the basic wash programmes. The machine is set at the factory so that the water level in the main wash and Intensive rinses will be increased if the Water plus EXTRA is selected. -
Page 19: Spinning
Spinning Final spin speed To omit the final spin (Rinse hold) ^ Select the Rinse hold setting. The Wash programme laundry will not be spun and will Cottons 1400 remain suspended in the final rinse Minimum Iron water. This reduces creasing if the Delicates laundry is not going to be removed Woollens... -
Page 20: Programme Chart
Programme chart 9ö8E76 Cottons 30°C to 95°C Fabric type Cottons and linen fabrics, e.g. bed linen, table linen, towelling, jeans, underwear, T-shirts, nappies. Notes – Only use the Cottons 95°C programme for heavily soiled laundry. – For heavy soiling or where staining is visible, select Intensive . –... - Page 21 Programme chart 4321 Delicates cold to 60°C Fabric type For delicate garments made of synthetic fibres, mixed fibres and easy care cotton shirts and blouses. Curtains, including net curtains, specified machine-washable by the manufacturer. Notes – For heavy soiling where staining is visible, select Intensive . –...
- Page 22 Programme chart Quick wash cold to 40°C Fabric type Very lightly soiled fabrics which can in the Cottons programme. Extra Water plus Detergent Powder detergent, detergent for coloured fabrics, liquid detergent. See also "Detergent" section. Max. load 2.5 kg 7621 Automatic cold to 40°C Mixed loads of garments suitable for the Cottons and Minimum Fabric type...
-
Page 23: Garment Care Label Symbols
Garment care label symbols Hand wash (If no temperature is specified use the lowest temperature or cold) Do not wash apf Dry clean Do not dry clean Suitable for chlorine bleaching Do not use chlorine bleach Tumble dry At normal temperature At low temperature Do not tumble dry Ironing... -
Page 24: Programme Sequence
Programme sequence Main wash Rinses Spinning Water Wash Water No of Rinse and Final spin level rhythm level rinses interim spin Cottons Minimum iron Delicates – Automatic Quick wash Woollens Silks – Starch – – – Separate rinse – – –... - Page 25 Programme sequence This washing machine has fully Special features in the programme electronic controls with automatic load sequences: recognition. It takes in the right amount Anti-crease: of water required for the programme depending on the amount of laundry At the end of every programme, with and its absorbency rate.
-
Page 26: Changing The Programme Sequence
Changing the programme sequence To cancel a programme To change a programme You can cancel a programme at any Changing the programme or altering time after it has started. the temperature: ^ Press the Start/Stop button. After the start of a programme it is no The suds will be pumped away and the longer possible to select a different programme is cancelled. -
Page 27: Adding Or Removing Laundry After A Programme Has Started
Changing the programme sequence Adding or removing laundry The door cannot be opened, if: after a programme has started – the suds temperature is above 55°C. Laundry can be added or removed – the water is above a certain level. after the programme has started when –... -
Page 28: Programme Locking And Lock Function
Programme locking and lock function Programme locking System lock Programme locking prevents the The system lock prevents your machine from being opened or the machine being used without your programme cancelled or the knowledge. temperature or spin speed being When the system lock has been altered during a wash programme. -
Page 29: Detergent
For programmes with a pre-wash you dispense them into compartment j in will need to purchase a special con- the following order: tainer from the Miele Spare Parts de- partment which sits in the main wash 1. Detergent compartment j of the detergent dis- 2. -
Page 30: Fabric Conditioners And Liquid Starch
Detergent Fabric conditioners and liquid If starching frequently, clean the dis- starch penser compartment and especially Fabric conditioners make garments soft the siphon tube and conditioner and fluffy to handle and help prevent channel. See "Cleaning the deter- static cling when tumble drying. gent dispenser drawer". -
Page 31: Cleaning And Care
The washing machine must not be hosed down. E-Cloth A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. It can be washed 300 times. -
Page 32: Cleaning The Detergent Dispenser Drawer
Cleaning and care Cleaning the detergent dispenser drawer Remove detergent residues regularly. ^ Clean the siphon. 1. Remove the siphon from compartment §. Wash under running warm water. Clean the ^ Pull out the detergent dispenser siphon tube in the same way. drawer until a resistance is felt. -
Page 33: Cleaning The Filter In The Water Inlet
Cleaning and care Cleaning the filter in the water ^ First turn off the stopcock. inlet ^ Unscrew the threaded union connecting the free end of the inlet The washing machine has a filter to hose to the stopcock. protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more... -
Page 34: What To Do, If
Cleaning and care What to do, if . . . With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical equipment should only be carried out by a suitably qualified person in accordance with local and national safety regulations. -
Page 35: The Wash Programme Stops And A Fault Indicator Light Comes On
– the inlet hose is kinked. The filter in the water Clean the filter. inlet hose is dirty. The buzzer sounds and The Miele Waterproof Call the Service Department. system has reacted. the Inlet and Drain CHECK light flash. "– – –" appears in the display. -
Page 36: General Problems
Cleaning and care General problems Problem Possible cause Remedy The Excess detergent Excessive foam has Use less detergent next time CHECK light comes on. built up during and follow the washing. manufacturer's instructions on dosage given on the packaging. The Main wash There is a fault. -
Page 37: An Unsatisfactory Wash Result
Cleaning and care An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent Liquid detergents – Use a general purpose detergent does not give the usually contain no containing a bleaching agent. required result. bleaching agents. – Pour stain removers into They do not remove compartment j of the dispenser fruit, coffee and tea... -
Page 38: The Drum Door Does Not Open When You Press The Door Button
Cleaning and care The drum door does not open when you press the Door button Problem Remedy The machine is not Insert the plug in the socket and switch on. connected to the electricity supply. The machine is not Switch the machine on with the I-On/0-Off button. switched on. -
Page 39: Opening The Drum Door In The Event Of A Blocked Drain Outlet And/Or Power Failure
Cleaning and care Opening the drum door in the Blocked drain outlet event of a blocked drain outlet If the drain outlet is blocked, up to and/or power failure 25 litres of water will be retained in the machine. ^ Switch the washing machine off. There is a lever behind the detergent Caution: if laundry has been drawer fascia panel. -
Page 40: Opening The Drum Door
Cleaning and care Once the flow of water ceases: Make sure the drain filter is ^ Remove the drain filter completely. securely tightened. Otherwise there is a risk of water leakage during use. Opening the drum door Always make sure that the drum is stationary before reaching into the machine to remove laundry. -
Page 41: After Sales Service
Future updates (PC) cannot remedy yourself, please The indicator or check light marked PC contact: is the interface used by Miele service – your Miele dealer or technicians during servicing work for testing purposes and for updating the – the Miele Service Department (see machine's programme data. -
Page 42: Installation And Connection
Installation and connection Front view a Inlet hose with "Waterproof" system h Detergent dispenser drawer b Electricity supply cable i Drum door c - f Flexible drain hose (with j Access to drain filter, drain pump detachable swivel elbow) and emergency release g Facia panel with controls k Handle recesses for moving the machine... -
Page 43: Rear View
Installation and connection Rear view a Protruding lid for holding when e Transit bar covers moving the machine f Restraining clip for: b Electricity supply cable – Inlet hose c Inlet hose with "Waterproof" system – Drain hose d Drainage hose –... -
Page 44: Installation Surface
(available from the Miele Spare Parts Dept). ^ To remove the left and right covers 1. Use a screwdriver to prise out the cover as illustrated. - Page 45 Installation and connection ^ Using the spanner supplied turn the ^ Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then ^ withdraw the transit bar. ^ withdraw the transit bar.
-
Page 46: Re-Fitting The Transit Bars
Installation and connection The washing machine must not be moved without the transit bars in place. Store the transit bars as shown or keep them in a safe place for future use. They must be re-fitted if the machine is to be moved again (e.g.when moving house). -
Page 47: Levelling The Machine
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. ^ Using the spanner supplied turn counter nut 2 in a clockwise direction. Then turn counter nut 2 together with foot 1 to unscrew. -
Page 48: Building Under A Continuous Worktop/In A Kitchen Run
Installation and connection Washer and Dryer stack The fitting of building under kits and A Miele tumble dryer can be stacked stacking kits must only be with the washing machine. A "WTV" undertaken by qualified and stacking kit* is necessary and can be... -
Page 49: The Miele Waterproof System
Installation and connection The Miele Waterproof system 2) Electronic unit and washing machine housing The Miele Waterproof system protects the washing machine from water – Sump damage. Any leaking water is collected in a The system consists of three main sump in the base of the machine. -
Page 50: Connection To The Water Supply
Installation and connection Connection to the water supply The machine should be connected to a mains water supply in accordance with The plastic casing of the safety local and national safety regulations. valve contains electrical The German authorities do not require it components. - Page 51 Installation and connection Maintenance and care If you intend to unscrew the Miele Waterproof system hose from the stopcock it is essential to disconnect the machine from the electricity supply first. Only use a Miele Waterproof system hose should you need a replacement.
-
Page 52: Connection To The Drainage System
5 m. The machine. necessary parts can be purchased 2. Connected securely to a plastic drain from the Miele Spare Parts Department pipe with a rubber nipple. There is no or your Miele dealer. need to use a non-return valve. -
Page 53: Electrical Connection U.k
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out The fuse cover must be refitted when by a suitably qualified and competent changing the fuse, and if the fuse cover person, in strict accordance with is lost, the plug must not be used until a national and local safety regulations. -
Page 54: Consumption Data
Consumption data Load Consumption data Energy Water Duration in kWh in litres Normal Intensive Cottons 95°C 5.0 kg 1.70 1 h 51 min 2 h 06 min 60°C 5.0 kg 0.85 – 1 h 59 min 60°C 5.0 kg 0.85 1 h 30 min 1 h 59 min 40°C... -
Page 55: Technical Data
Technical data Height 85.0 cm Width 59.5 cm Depth 58.0 cm Depth with door open 97.5 cm Weight 94 kg Maximum floor load 1600 Newton (approx. 160 kg) Capacity 5 kg dry laundry Voltage see data plate Rated load see data plate Fuse rating see plug Consumption data... - Page 57 Programmable functions for changing standard settings...
-
Page 58: Programmable Functions
Programmable functions Water plus system A Press the Start/Stop button and keep it pressed in whilst carrying out steps This setting is used to select the B - C. water intake setting for the Water plus B Press the I-On/0-Off button in. EXTRA. -
Page 59: Gentle Action
Programmable functions Gentle action A Press the Start/Stop button and keep it pressed in whilst carrying out steps Activating gentle action reduces the B - C. drum action and is suitable for B Press the I-On/0-Off button in. washing slightly soiled articles more gently. -
Page 60: Top-Up Rinse For Cottons
Programmable functions Top-up rinse for Cottons A Press the Start/Stop button and keep it pressed in whilst carrying out steps When this is activated, additional B - C. water flows into the drum at the end B Press the I-On/0-Off button in. of the main wash to cool the suds down. -
Page 61: Soak
Programmable functions Soak A Press the Start/Stop button and keep it pressed in whilst carrying out steps A length of time of between 30 minutes B -C. and 2 hours can be programmed in 30 B Press the I-On/0-Off button in. minute increments for the soak process. -
Page 62: Buzzer
Programmable functions Buzzer A Press the Start/Stop button and keep it pressed in whilst carrying out steps When the buzzer function has been B - C. activated, an audible tone sounds at B Press the I-On/0-Off button in. the end of a programme or when Rinse hold is reached. -
Page 63: Keypad Tones
Programmable functions Keypad tones A Press the Start/Stop button and keep it pressed in whilst carrying out steps An audible tone sounds each time a B - C. button is pressed. B Press the I-On/0-Off button in. The washing machine is delivered with C Wait until the indicator light for the the keypad tone switched off. -
Page 64: Memory Function
Programmable functions Memory function A Press the Start/Stop button and keep it pressed in whilst carrying out steps If an Extra(s) is selected for a B - C. programme, and / or the spin speed B Press the I-On/0-Off button in. is altered, the machine stores these changes in memory at the start of a C Wait until the indicator light for the... - Page 68 Alteration rights reserved/2505/W 2514 WPS M.-Nr. 06 068 890 / 03 en - GB...