Lun Manager Window; Set Uuid Window - HP StorageWorks XP10000 - Disk Array Configuration Manual
Xp disk array configuration guide for openvms
Hide thumbs
Also See for StorageWorks XP10000 - Disk Array:
- User manual (92 pages) ,
- Owner's manual (92 pages) ,
- Site preparation manual (80 pages)
Table of Contents
Advertisement
1.
Start LUN Manager and display the LUN Manager window (see
Figure 2 LUN Manager window
.
2.
In the tree, double-click a port. The host groups corresponding to the port are displayed.
3.
In the tree, select a host group. The LU Path list displays showing information about LU paths
associated with the selected host group.
4.
In the LU Path list, select one or more LUNs to which volumes are assigned (if a volume is assigned
to an LUN, the columns on the right of the LUN column are not empty). When plural LUNs are
selected, same UUID is set to all selected LUNs.
5.
Right-click the selection and then select Set UUID. The Set UUID window will be displayed (see
Figure
3).
Figure 3 Set UUID window
.
6.
Enter a UUID in UUID in the Set UUID window. When a OpenVMS server host is used, a UUID
can consist of the numerical value between 1 to 32,767.
7.
Click OK to close the Set UUID window.
8.
Click Apply in the LUN Manager window. A message appears asking whether to apply the
setting to the storage system.
9.
Click OK to close the message. The settings are applied to the storage system and the UUID is
set.
XP Disk Array Configuration Guide for OpenVMS
Figure
2).
13
Advertisement
Table of Contents
