Selecting The Scsi Emulation Driver - HP StorageWorks XP10000 - Disk Array Configuration Manual
Disk array configuration guide for vmware
Hide thumbs
Also See for StorageWorks XP10000 - Disk Array:
- User manual (92 pages) ,
- Owner's manual (92 pages) ,
- Site preparation manual (80 pages)
Table of Contents
Advertisement
2.
Select the SCSI controller for use with your shared LUNs.
NOTE:
If only one SCSI controller is present, add another disk that uses a different SCSI bus than
your current configured devices.
3.
Select the Bus Sharing mode (virtual or physical) appropriate for your configuration, and then
click OK.
NOTE:
Sharing VMDK disks is not supported.
Selecting the SCSI emulation driver
Select the HP supported SCSI emulation driver for a guest OS as follows:
1.
Windows
For Windows 2000 use the BusLogic SCSI driver.
For Widows 2003 use the LSI Logic SCSI driver.
2.
Linux
For the 2.4 kernel use the LSI Logic SCSI driver.
For the 2.6 kernel use the BusLogic SCSI driver.
XP Disk Array Configuration Guide for VMware
19
Advertisement
Table of Contents
