Item
UserName
OutputDir
Set Syslog Server Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Audit Log],Set Syslog Server,DetailFlg=Enable,Normal end,,,Seq.=xxxxx
+DetailFlg=Enable
+LocationInfo=USP001
+{ServerType,IPAddrVer,OutFlg,SrvAddr,SrvPortNum}=[{Primary,IPv4,Disable,
192.168.0.1,514},
-{Secondary,Enable,IPv6,3ffe:0501:4819:2000:5254:00ff:fedc:50d2,-}]
[Audit Log]
Audit Log function
Set Syslog Server
Set System Log Server operation
Detail Flag=Enable
Enable is the selected parameter. This operation uses the following parameters, as shown in
16.
Table 16 Parameters for Set Syslog Server Operation
Parameter
Detail Flag=Enable
Detail Flag=Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
If enabled, detailed information appears for this operation, as shown in
Table 17 Set Syslog Server Operation
Item
DetailFlg
LocationInfo
64
Audit Log Function
Description
The user name to login to the FTP server. If the setting has not changed, a hyphen (-) is
displayed.
The directory in the FTP server that the transferred audit log information files are stored.
If the setting is not changed, a hyphen (-) is displayed.
Description
Detailed information is output to the syslog server.
Detailed information is not output to the syslog server.
Description
Indicates whether to output detailed information to the syslog server.
Enable: Output detailed information. Disable: Do not output detailed information.
The location identification information for the storage system. Not output when setting
is not changed.
Table
Table
17.