Page 2
Hewlett-Packard Company. The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this printed material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Typographical Conventions The following typographical conventions are used in this manual: Emphasis: Denotes important information. : Keys on the library. Keycap Computer Output: Information displayed in the display window and screen menu items that you can select. WARNING Warnings call attention to a procedure or practice that could result in personal injury if not correctly performed.
In This Manual This user’s guide includes: Chapter 1 set-up information for the HP SureStore Optical 80ex optical jukebox Chapter 2 information about choosing and using optical disks Chapter 3 features description, operating instructions, and troubleshooting information Appendix A supplies and customer support Appendix B operating this jukebox on a SCSI bus Appendix C...
Page 7
Contents Europe - European Customer Support Center ..... . .A-10 English language support from other European countries:....A-11 Asia-Pacific - HP Customer Support Center .
Setting up the Jukebox Setting Up the Optical Jukebox Setting Up the Optical Jukebox This chapter tells you how to connect the jukebox to your computer. Follow the unpacking instructions printed on the outside of the shipping carton before you complete the steps given in this chapter.
Setting up the Jukebox Choosing a Location Choosing a Location Before setting up your jukebox, choose the proper environment based on the following recommendations: • temperature range between 65-75º F (18-24º C). • away from sources of particulate contamination such as printers, scanners, frequently-used doors and walkways, supplies that collect dust, and smoke-filled rooms.
Setting up the Jukebox Identifying Rear Panel Features Identifying Rear Panel Features Refer to Figure 1-1 and the text on the next page to identify parts and learn their functions. Figure 1-1 Rear Panel Features Chapter 1...
Page 17
Setting up the Jukebox Identifying Rear Panel Features The numbers below correspond to the numbers in Figure 1-1 on the previous page. Power receptacle Used to connect the power cord to the jukebox. Auxiliary power Used for auxiliary power connections. Do not port use for connections requiring over 3 amperes of power.
Setting up the Jukebox Removing the Mailslot Shipping Bracket and Shipping Screw Removing the Mailslot Shipping Bracket and Shipping Screw The jukebox is shipped with a plastic bracket inserted into the mailslot. In addition to protecting the mailslot during shipment, the bracket also holds a warning decal reminding you to remove the shipping screw on the bottom of the jukebox.
Setting up the Jukebox Connecting the SCSI Cable to the Jukebox Connecting the SCSI Cable to the Jukebox The jukebox accepts a single-ended SCSI bus. The connectors are low-density 50-pin (Centronics type). The drives are “fast” SCSI so you have a maximum of 3 meters (9.8 feet) available for the SCSI bus.
Setting up the Jukebox Connecting the Jukebox as the Only Peripheral Connecting the Jukebox as the Only Peripheral Figure 1-4 Connecting the Jukebox as the Only Peripheral The default IDs for the jukebox are as follows: Jukebox = 3 Drive 1 = 4 Drive 2 = 5 (if installed) 1.
Setting up the Jukebox Connecting the Jukebox with Other SCSI Peripherals Connecting the Jukebox with Other SCSI Peripherals In most circumstances, the recommended configuration for this jukebox is as the only device on a SCSI bus. However, your use of the jukebox may be such that another device could be connected to the bus without a loss of performance.
Setting up the Jukebox Connecting Power Connecting Power 1. Ensure that the mailslot shipping bracket and the shipping screw are removed (see Figures 1-2 and 1-3). 2. Ensure that your host computer and your jukebox are OFF. The jukebox power switch is OFF when it is OUT. 3.
Setting up the Jukebox Moving or Shipping the Optical Jukebox Moving or Shipping the Optical Jukebox To move the jukebox a short distance, such as to another office or to another floor in your building, refer to “Moving the Jukebox”. To ship the jukebox to another location, refer to “Shipping the Jukebox”.
Setting up the Jukebox Moving or Shipping the Optical Jukebox Shipping the Jukebox 1. Unmount any optical disk surfaces in the jukebox if necessary. See your computer operating system, or software application documentation for instruction on how to unmount optical disks. 2.
Page 26
Setting up the Jukebox Moving or Shipping the Optical Jukebox 6. Re-insert the shipping screw that was removed when the jukebox was unpacked. This screw is 6/32 UNC-2B cap screw 1 3/4 inches long. Re-install in the position shown in Figure 1-3. 7.
NOTE A list of Hewlett-Packard optical media cartridges is in Table A-1 of Appendix A. If you are not using HP media, please refer to the list of HP-qualified manufacturers on the website: www.hp.com/isgsupport/optical/index.html...
Using Optical Disks Choosing an Optical Disk Type Choosing an Optical Disk Type Two disk types are available for use in the jukebox: rewritable disks and write-once disks. To choose which type of disks to use, consider these points: • Rewritable optical disks--data can be repeatedly written and erased.
Using Optical Disks Labeling an Optical Disk Cartridge Labeling an Optical Disk Cartridge Make it a practice to label your optical disk cartridges. You are provided adhesive labels with each disk for this purpose. Here are some suggestions for labeling: NOTE Your jukebox application software may label your optical disk slot locations differently.
Using Optical Disks Write-Protecting an Optical Disk Write-Protecting an Optical Disk Each side of an optical disk can be write-protected by sliding the write-protect button in the direction of the arrow on the cartridge (see Figure 2-2). With rewritable optical disks, write-protecting the disk prevents overwriting existing files and prevents any additional file being written to the disk.
Using Optical Disks Caring for Optical Disks Caring for Optical Disks Follow these guidelines to ensure that your optical disks remain in good condition: • Do not expose disks to extreme magnetic fields. • Do not expose disks to dust particles. •...
Operating the Jukebox Overview of This Chapter Overview of This Chapter This chapter describes how to do the following: identify front panel features • use selection buttons • interpret displayed messages • load optical disks into the jukebox • eject optical disks from the jukebox •...
Operating the Jukebox Indentifying Front Panel Features Indentifying Front Panel Features Figure 3-1 Features on the Front Panel Mailslot Used to load and eject disks. 9-Character display Displays information about the current operation. Selection buttons Pressed to perform the following operations: cancels the current operation or choice CANCEL scrolls the displayed choice backward by one...
Page 36
Operating the Jukebox Indentifying Front Panel Features Figure 3-2 Jukebox Display Menu Tree PREV NEXT NEXT READY TEST * EJECT * CONFIG * INFO * SCSI IDS * LOAD * ENTER ENTER ENTER ENTER ENTER ENTER SLOT # SLOT # 1-153 0-32 0-39...
Operating the Jukebox Using Selection Buttons Using Selection Buttons Use the , and buttons to select tasks you want the CANCEL PREV NEXT ENTER jukebox to perform. When you push these buttons, the message in the display window changes. See the next section for a list of messages. Each time you push the button, a task option appears.
Operating the Jukebox Understanding Display Window Messages Understanding Display Window Messages The jukebox displays messages according to your keypresses on the control panel. One level of messages is to tell you which operation you have selected, another level is to give you feedback to which options you are selecting under each operation. Messages are also displayed that tell about operations that the host computer has initiated.
Operating the Jukebox Understanding Display Window Messages Messages During Host Operations Some disk operations initiated by the host computer will cause messages to be displayed. The following are examples of these messages. LOAD 15 - the host computer selected the disk in slot 15 for insertion into a drive MOVING - the disk transport mechanism is moving a disk STORE 1 - the host computer selected slot 1 to store a disk...
Operating the Jukebox Using the Front Panel Features Using the Front Panel Features This section gives step-by-step instructions for tasks that are accessed by using the selection buttons on the control panel. Tasks included in this section are: • loading a disk into the jukebox •...
Operating the Jukebox Using the Front Panel Features Loading an Optical Disk Into the Jukebox Label all disks before inserting them into the jukebox. (See “Labeling an Optical Disk Cartridge” in Chapter 2 for instructions.) Figure 3-3 Loading a Cartridge NOTE Some software packages require that you insert and remove disks by following the instructions in the software.
Operating the Jukebox Using the Front Panel Features After the disk has been loaded into the selected storage slot, READY displays. Ejecting an Optical Disk From the Jukebox Start with READY in the display. 1. Press until EJECT * displays. NEXT 2.
Operating the Jukebox Using the Front Panel Features 9. Press until the third number of your current security code displays. NEXT 10. Press ENTER If you entered an incorrect code, NO CONFIG displays briefly and then CONF 17 displays. Repeat steps 4-10 again and enter the correct current code. After entering the current security code in the previous steps, you are prompted to enter a new three-digit security code.
Operating the Jukebox Using the Front Panel Features Some configurations require your security code. See “Setting a Security Option” for steps to change configurations 15, 17, 20 and 31. Changing a Jukebox Security Configuration Configurations that affect security of your disks in the jukebox are numbered 15, 17, 20, and 31.
Operating the Jukebox Using the Front Panel Features information about checking the SCSI bus status. If your computer is connected to a LAN, be sure to check with your system administrator before turning off power to the jukebox. 13. Turn the jukebox OFF, then ON to save the code to the jukebox flash ROM. Setting Non-Security Configurations Start with READY in the display.
Page 46
Operating the Jukebox Using the Front Panel Features Table 3-1 Configurations Number Function Default Settings 0-14 Used by service personnel only. Changing these configurations may result in an inoperable jukebox. Enables or On - disks cannot be loaded or ejected. prevents manual Off - disks can be loaded and ejected.
Page 47
Operating the Jukebox Using the Front Panel Features Number Function Default Settings Enabling/disabling Off - Normal mailslot operation. mailslot access. On - The mailslot rotates to face inward when Configuration 15 is set to ON or a Prevent Media Removal command is received from the host computer.
Operating the Jukebox Using the Front Panel Features Retrieving Information Logged by the Jukebox You can display information about the operations of the jukebox by using the INFO * option. This information is called a log. See Table 3-2 for a list of logs. Start with READY in the display.
Operating the Jukebox Using the Front Panel Features Running an Internal Test The jukebox is capable of running internal tests. These tests are used for service diagnostic purposes. You may be asked to run some tests by the service representative prior to coming to your site. Results of the tests can provide service with important information that can help service to more quickly resolve the problem in your jukebox.
Operating the Jukebox Changing SCSI IDs Changing SCSI IDs The jukebox controller uses two SCSI IDs if your jukebox has one drive and three IDs if your jukebox has two drives. The jukebox controller is assigned one ID and one ID is assigned to each disk drive. The default SCSI IDs are as follows •...
Operating the Jukebox Changing SCSI IDs CAUTION Do not turn off power to the jukebox until you are sure the SCSI bus is inactive. Removing power from a SCSI peripheral when the bus is active can result in data loss and/or indeterminate bus states. Check your host system manuals for information about checking the SCSI bus status.
Operating the Jukebox Troubleshooting Troubleshooting This section provides steps you can take when problems occur during operation. To troubleshoot problems, first refer to the procedures in this troubleshooting section. If these procedures do not correct the problem, check the HP web site at www.hp.com/isgsupport/optical/index.html and the other support services listed in Appendix A.
Page 53
Operating the Jukebox Troubleshooting Table 3-3 Troubleshooting Problem What to do Jukebox won’t • Check that the power indicator light on the drive front power on panel is ON (“3” on Figure 3-1). • If light is not ON, make sure the power switch on the rear panel is ON and that the jukebox is plugged in.
Page 54
Operating the Jukebox Troubleshooting Problem What to do No display messages Check that the fan in the front of the jukebox is running (or the fan in the rear on the power supply). If the fans are not running, check that the jukebox is receiving power. See “Jukebox won’t power on”...
Page 55
Operating the Jukebox Troubleshooting Problem What to do Disk inserted in the A security configuration is set that prevents disks from mailslot, but being loaded into, or ejected from, the jukebox. RESERVED displays If you want to change the security configuration, see “Changing a Jukebox Security Configuration”...
Page 56
Operating the Jukebox Troubleshooting Problem What to do INIT ELEM • The jukebox is inventorying the disks and drives. The displays jukebox or host computer may have initiated this process. Wait for this process to finish. • If this process does not complete, if READY does not appear in the display, or if no motion is seen in the jukebox, power cycle the jukebox.
Supplies and Customer Support Overview of This Appendix Overview of This Appendix This appendix provides information on the following topics: • supplies and accessories • shipping screw specifications • HP customer support Appendix A...
HP Direct. Call 1-800-752-0900 for the location of your nearest authorized Hewlett-Packard dealer. To contact a Hewlett-Packard sales representative, see Table A-2 for a list of addresses and phone numbers of HP sales offices. To phone HP Direct call 1-800-538-8787.
Page 60
Supplies and Customer Support Supplies and Accessories Item HP Part Number Rewritable optical disk (1,024 bytes/sector, 4.7 88143J Gbytes, single disk) Rewritable optical disk (1,024 bytes/sector, 4.7 C2589J Gbytes, 8-pack) Write-once optical disk (1,024 bytes/sector, 4.7 88145J Gbytes, single disk) Write-once optical disk (1,024 bytes/sector, 4.7 C2591J Gbytes, 8-pack)
Page 61
Supplies and Customer Support Supplies and Accessories Item HP Part Number 1 m (3.3 ft) bail to bail, m-f 9222D 2 m (6.6 ft) bail to bail, m-m 9222C 3 m (9.8ft) bail to bail, m-m C2928A 3 m (9.8 ft) bail to bail, m-f C2900A 5 m (16.4 ft) bail to bail, m-f C2901A...
Supplies and Customer Support Shipping Screw Specifications Shipping Screw Specifications If you have misplaced the shipping screw, you can use a cap screw with these specifications: 6/32 UNC-2B cap screw, 1-3/4 inches long. Appendix A...
Supplies and Customer Support Hewlett-Packard Customer Support Hewlett-Packard Customer Support If your jukebox fails during the warranty period, and the suggestions in this user’s guide and accompanying documentation do not solve your problem: • Consult the Quick FAX or HP FIRST (FAX information Retrieval Support Technology) facsimile assistance services.The phone numbers are under...
Supplies and Customer Support Hewlett-Packard Customer Support Faxback Services Quick FAX and HP FIRST are automated systems that FAX requested product information and/or technical support documents to you. These faxback services are available 24 hours. Simply dial the FAX number from a touch tone telephone or Group 3 facsimile machine and follow the voice prompts that guide you to select an index of available support an product documents.
(to the US) Electronic Support Services For 24-hour access to information over your modem, refer to the following listings. On-line Service Providers Technical information is available on CompuServe and America Online. (Compuserve and America Online are not operated by Hewlett-Packard.) Appendix A...
HP systems Forum, Go HPSYS America Online HP forum, Go HPSTOR AccessHP and Support on the World Wide Web Product and support information is available on the Hewlett-Packard web site: Product information - www.hp.com Support - www.hp.com/isgsupport/optical/index.html Telephone Support During Warranty...
Supplies and Customer Support Hewlett-Packard Customer Support 8:30 - 16:00 Wed AEST (09) 356-6640 Zealand Singapore 9:00 - 17:00 Mon - Fri (65) 271-7233 Taiwan 8:30 - 17:30 Mon - Fri (02)717-9609 Elsewhere in the World to the US Contact your authorized HP dealer/distributor or the nearest HP sales and service office.
Supplies and Customer Support Hewlett-Packard Customer Support Elsewhere in the World Contact your authorized HP dealer/distributor or the nearest HP sales and service office. Additional Telephone Support Singapore Customer Care-Line for End-Users (65) 272-5300 HP Reseller Locator Numbers (800) 752-0900...
Supplies and Customer Support Warranty Warranty HP PRODUCT DURATION OF WARRANTY C1100J / C1115J One Year 1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective.
Page 71
Supplies and Customer Support Warranty 8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 or the actual amount paid for the product that is the subject of the claim, and for damages for bodily injury or death, to the extent that all such damages are determined by a court of competent jurisdiction to have been directly caused by a defective HP product.
Page 72
Supplies and Customer Support Warranty A-16 Appendix A...
Operating This Jukebox on a SCSI Bus A Brief Overview of SCSI A Brief Overview of SCSI General The Small Computer System Interface (SCSI), is a contention-based bus that accommodates different speed devices without impacting the devices with faster transfer speeds. This specification was defined by the American National Standards Institute (ANSI) in 1986.
Operating This Jukebox on a SCSI Bus A Brief Overview of SCSI an ID greater than 7, would always assume it won the contention and would attempt to talk, perhaps at the same time as a device with an ID above 7 that was contending for the bus.
Operating This Jukebox on a SCSI Bus A Brief Overview of SCSI Termination To keep signals on the SCSI bus from being reflected, “terminators” must be placed at each end of the physical bus. These terminators may be either active or passive. Passive termination is a resistor network.
Operating This Jukebox on a SCSI Bus A Brief Overview of SCSI Connectors Narrow devices (50-pin) use the following connectors: • 50-pin low-density clip Centronics-type (external) This is a large connector that is similar to a printer cable. This type of connector is gradually being replaced by the Micro D connector, described below.
Operating This Jukebox on a SCSI Bus The SCSI Bus and This Jukebox The SCSI Bus and This Jukebox This jukebox is a “fast and narrow” SCSI device that uses a single-ended SCSI bus. This jukebox does not support logical unit number (LUN) addressing. When considering adding other peripherals to the jukebox bus, you should consider the following: •...
Page 79
Operating This Jukebox on a SCSI Bus The SCSI Bus and This Jukebox Because a narrow device only has a 50-pin connector, it will not transmit the eight extra bits of data needed for the wide device on the end of the bus. Using only 50 lines also prevents the narrow device from passing along the IDs of devices at 8 or above.
Operating This Jukebox on a SCSI Bus The SCSI Bus and This Jukebox It is very important that the 68-pin to 50-pin cable is properly configured to assure that the eighteen truncated lines are properly terminated. Cable Lengths This jukebox uses a single-ended bus. The maximum bus length for this "fast" device on a single-ended bus is 3 meters (9.8 feet).
Operating This Jukebox on a SCSI Bus The SCSI Bus and This Jukebox General • Do not connect a single-ended bus to a differential bus. Damage can occur. NOTE For current information on issues relating to installation, operation, and support of jukeboxes, you may want to go to: HP Optical Storage www.hp.com/isgsupport/optical/index.html...
Page 82
Operating This Jukebox on a SCSI Bus The SCSI Bus and This Jukebox B-10 Appendix B...
Safety and Regulatory Information Overview of this Appendix Overview of this Appendix This appendix contains important safety and regulatory information for the United States, Finland, Sweden, Germany, United Kingdom, European Union, and Japan.
Safety and Regulatory Information CDRH Regulations (USA Only) CDRH Regulations (USA Only) The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.
Safety and Regulatory Information United Kingdom Telecommunications Act 1984 United Kingdom Telecommunications Act 1984 The HP SureStore Optical 80ex jukeboxe is approved under Approval Number NS/G/1234/J/100003 for indirect connection to Public Telecommunication Systems within the United Kingdom.
Safety and Regulatory Information Herstellerbescheinigung Herstellerbescheinigung Diese Information steht im Zusammenhang mit den Anforderungen der Maschinenlärn information sverordnung vom 18 Januar 1991. Schalldruckpegel Lp < 70 dB(A) • am arbeitsplatz • normaler betrieb • nach ISO 7779:1988/EN 27779:1991 (Typprüfung) English Translation of German Sound Emission Directive This statement is provided to comply with the requirements of the German Sound Emission Directive, from 18 January 1991.
Safety and Regulatory Information Turvallisuusyhteenveto Turvallisuusyhteenveto Laserturvallisuus LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT HP SureStore Optical 80ex optiset levymuistiasemat ovat käyttäjän kannalta turvallisia luokan 1 laserlaitteita. Normaalissa käytössä levymuistiaseman kotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN 60825 mukaisesti. VAROITUS ! Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle lasersäteilylle.
Safety and Regulatory Information English Translation of Finland Regulatory Information English Translation of Finland Regulatory Information LASER SAFETY SUMMARY LASER SAFETY CLASS 1 LASER PRODUCT (The same in Swedish.) HP SureStore Optical 80ex jukebox is for user safe class 1 laser products. In normal use the enclosure of the optical drives prevents the laser beam from escaping outside of the product.
Safety and Regulatory Information Japanese VCCI Statement Japanese VCCI Statement This equipment is in the Class B category information technology equipment based on the rules of Voluntary Control Council For Interference by Information Technology Equipment (VCCI). Although aimed for residential area operation, radio interference may be caused when used near a radio or TV receiver.
Page 92
Safety and Regulatory Information Japanese VCCI Statement C-10...
Glossary way a musical jukebox finds a record and moves it to the turntable when a song is requested. cartridge A plastic enclosure that contains an optical disk. The cartridge jukebox controller The part of the is labeled "A" or "B" to denote separate jukebox that controls the sending and sides of the optical disk.
Page 94
Glossary factory-stamped code on the disk, and two physical ends. A peripheral device automatically determines whether to uses a terminator only if it is at the end operate in rewritable or write-once of the bus. mode. optical disk A term synonymous with the 5.25-inch magneto-optical disk.
Page 95
Index Numerics optical drive ID changing 3-19 50-pin low-density connectors 1-5 features 9-character display rear panel 1-4 location 3-3 power connecting 1-11 power receptacle changing 3-18 location 1-5 cooling 1-3 default 1-9 power switch auxiliary power port internal tests location 1-5 location 1-5 running 3-17 rear panel...
Page 96
Index terminator when last device 1-5 tests running 3-17 troubleshooting 3-20 type styles in this book iii using optical disks 2-2 voltages 1-3 warranty A-14 Index-2...