Snmp Manager Functions; Component Status Information - HP XP20000/XP24000 Reference Manual
Hp storageworks xp24000/xp20000 snmp agent reference guide (ae131-96088, may 2011)
Hide thumbs
Also See for XP20000/XP24000:
- Manual (448 pages) ,
- Reference manual (372 pages) ,
- Configuration manual (183 pages)
Advertisement
Error Report
The following table lists the errors to be reported for the REQUEST operations.
Table 3 SNMP Agent REQUEST Operations
Error
noError(0)
noSuchName(2)
readOnly(4)
genErr(5)
SNMP Manager Functions
Component Status Information
You can obtain the status information for certain storage system components from an SNMP
manager. The following table lists the components for which the status can be obtained.
Table 4 Available Component Status Information
Area
Storage System
Disk Unit
The following table lists the storage system component status as well as the trap report function.
Table 5 Storage system Component Status Types
Status
Normal
Acute failure detected
Serious failure detected
8
Overview of SNMP
Description
Normal
There are no MIB objects that are
required. (Not supported).
The GETNEXT REQUEST command
that is specified for the following
object identifier of the last
supported MIB object is received.
SET REQUEST is received.
Error occurred for other reasons.
Component Name
Processor
BUS
Cache
Shared memory
Power supply
Battery
Fan
Others
Hard Disk Drive
Power supply
Fan
Others
Drive
Description
Normal operation.
All operations in a storage system stopped.
Operation in a component where a failure occurred stopped.
Corrective Action
N/A
Verify that the requested object is
correct.
SET operation is not supported.
Retry the operation.
Advertisement
