Using the short step system you can
store microwave power settings and
times for frequently used processes.
Use the function selector switch to
chose the microwave mode.
Press the c touch control.
Up to a maximum of 5 programme
stages can be stored. You can call up
the individual programme stage by
pressing the c touch control several
times.
A microwave power setting of 1200 W
has been factory set for every pro-
gramme stage and a time of 1, 2, 3, 4
or 5 minutes stored for each suc-
cessive programme stage.
The stored settings appear each time
in the display area.
Select the programme you require
by pressing the c touch control
once or several times.
The stored time will appear in the dis-
play area.
36
Select the time you require using the
– /+ touch control.
You can enter a time up to a maxi-
mum of 10 minutes.
Press Enter to accept this newly se-
lected time.
The stored microwave power setting
will appear in the display area.
Select the power setting you require
using the – /+ touch control.
If you want to store these settings
permanently, press (and hold) the c
touch control until an audible tone
sounds.
The most recently selected microwave
power setting will appear in the display
area.