Operating instructions Pyrolytic ovens H 4330, H 4430 To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 06 234 950...
Description of the appliance Control panel * Oven interior a Programme selector, display c Door contact switch, b Multi-function selector with turn and Door lock for pyrolytic operation d Heating element for top heat and press mechanism, Display grilling with roof liner e Air inlet for fan f Shelf levels 1, 2, 3, 4 g Oven door...
Description of the appliance Features Pyrolytic self-cleaning programme The oven interior can be kept clean by Electronic controls using the Pyrolytic . cleaning programme. In addition to operating the various cooking programmes to bake, roast This programme heats the oven interior and grill the electronic controls also up to 460 °C.
If the door is opened during operation, These and other accessories are also the door contact switch causes the available to order from the Miele Spare oven heating, and the fan, depending Parts Dept. or your Miele Dealer. See on which oven function is operating, to "Extra accessories"...
Description of the appliance Roasting filter Anti-splash tray (depending on model) The roasting filter must be fitted in front of the fan when cooking anything fatty, The anti-splash tray should be placed or where food is likely to splatter, e.g. in the deep-sided grill pan when grilling when open roasting or grilling meat.
Description of the appliance Handle (depending on model) The handle makes it easier to take the baking tray, grill pan and rack out of the oven, or to put them into it. The two prongs at the top go inside the pan, rack or tray and the U-shaped supports underneath.
Caring for the environment Disposal of the packing Disposal of your old appliance material or machine The transport and protective packing Electrical and electronic appliances / has been selected from materials which machines often contain materials are environmentally friendly for disposal which, if handled or disposed of and can normally be recycled.
Warning and Safety instructions Technical safety This appliance complies with all Before connecting the appliance to relevant legal safety requirements. the mains supply, make sure that Improper use of the appliance can, the voltage and frequency correspond however, present a risk of both to the rating on the data plate, personal injury and material otherwise the appliance could be...
Page 12
Warning and Safety instructions Installation, maintenance and repairs may only be carried out by Caution, danger of burning. a suitably qualified and competent person in accordance with national and High temperatures are produced by the oven. local safety regulations. Repairs and other work by unqualified Great care should be taken to persons could be dangerous.
Page 13
Warning and Safety instructions Remove all accessories as well as If you wish to complete a cooking the runners and any extra process using the residual heat in accessories such as, for example, the the oven, do not switch the appliance baking carriage, or telescopic runners off.
Warning and Safety instructions General notes Never add water to food on a hot baking tray or grill pan or directly Never leave the appliance onto food in a hot oven. The steam unattended when cooking with oil created could cause serious burns or or fats, as these are a fire hazard if scalding and the sudden change in allowed to overheat.
Page 15
Warning and Safety instructions Disposal of your old appliance When using kitchen appliances connected to sockets near the Before throwing an old appliance oven, ensure that the cable cannot get away it must first be made trapped in a hot oven door, which could unusable.
Safety features Door lock for pyrolytic mode Safety cut-out For safety reasons the door is This is a safety feature to protect the automatically locked at the beginning of oven if it has been operating for an the pyrolytic programme. exceedingly long period.
Before using for the first time The oven is supplied with the controls pushed in. They have to be released before the oven can be used. After installation and before using the ^ Press the multi-function selector oven for the first time the clock has to gently.
Before using for the first time Cleaning and heating up for the first time Before use, please remove any stickers from the floor of the oven, baking trays, grill pan etc. The recommended temperature 160 °C any cork spacers at the sides will then appear in the display.
Controls Display The oven controls consist of: – the Programme selector, for selecting oven functions with, e.g. Lighting H/v, Fan plus Y, Auto f g ) a roast E, ... – the Multi-function selector with The bottom line shows the Symbols of press and turn mechanism for functions where data can be selecting oven functions which...
Controls Multi-function selector with Whilst triangle V is flashing, use the multi-function selector to make any turn and press mechanism changes: – Turning it clockwise, increases the value shown or engages the function, – Turning it anti-clockwise, reduces the value or switches the function off. The triangle V will flash for approx.
Functions and symbols in the display Different functions can be called up depending on the position of the programme selector. This chart gives an overview of these settings. Symbol Programme selector setting Light H/v Position "0" Function Changing the time of –...
Operating sequence ^ Whilst the triangle V is flashing, use the multi-function selector imme- diately to make any changes. The triangle V will flash for appox. 5 seconds. If this input period has elapsed you will have to re-select the function. ^ Press the multi-function selector gently.
Changing the time of day In the following example the time of day is changed from 12:05 to 14:37. ^ Turn the function selector to "0". ^ Turn the multi-function selector until "37" shows in the display. ^ Press the multi-function selector ^ Turn the multi-function selector (right gently.
To set the minute minder The minute minder can be used to time At the end of the time set for the any activity in the kitchen, e.g. boiling minute minder eggs. – a buzzer will sound fives times in You can enter a time of up to a succession.
Description of the oven systems Auto Roast E Fan plus Y This system works by the circulation of The oven heats initially to a high heated air. temperature (230 °C) which seals the meat to keep it succulent and tasty. A fan situated in the back wall of the As soon as this temperature has been oven draws in the air, heats it over a...
Description of the oven systems Gentle bake x wall of the oven. This enables a lower temperature to be selected than for Gentle bake uses the grill and the conventional grilling. bottom heating elements. Grill with the oven door closed. It is suitable for soufflés and gratins where a crispy finish is required.
Using the oven – Intensive bake F A function must first be selected using the programme selector and then, if For recipes which require a moist necessary, the temperature changed. topping and a crisp base, e. g. cheese cake, pizza, Quiche Lorraine The functions on this oven have pre-set and German style open fruit cakes.
Using the oven Selecting a temperature * Initial temperature approx. 230 °C, then drops to 160 °C for continued roasting Altering the temperature If the temperature recommended by the system is not suitable, it can be altered As soon as a cooking function is according to oven function within the selected, a recommended following range:...
Using the oven Using the oven Below is an example of setting a simple programme. To bake a cake using Fan plus Y, 150 °C. Once this setting has been accepted ^ Place the cake in the oven and close the door.
Using the oven Rapid heat-up Fan run-on The cooling fan will continue to run for a The appliance is supplied with the while after the oven has been switched Rapid heat-up function activated as off to prevent any humidity building up standard (factory default setting).
Using the oven Pre-heating the oven To switch "Rapid heat-up" off Rapid heat-up should not be used for Most dishes can be placed in a cold some items such as biscuits and small oven. They will then make use of the cakes because they will brown too heat produced during the heating-up quickly from the top.
Entering a cooking duration Start f You can programme cooking durations in this oven. Cooking processes are then controlled so that the oven will switch off, or on and off automatically. f g ) You can set the timing for a cooking function, by selecting one of the symbols and entering a time.
Entering a cooking duration Symbols in the display. To switch a programme on and off automatically there are several ways of In addition to the m and p symbols the entering the times: symbols representing the duration, start – enter the duration g and the finish and finish time are also displayed time ) constantly if times have been entered...
Entering a cooking duration Whilst a programme is running the The oven heating will switch on again if: following show in the display – the required temperature is altered. – the cooking duration is lengthened significantly. At the end of the cooking duration –...
Entering a cooking duration Switching off automatically To switch a programme off automatically a duration has to be entered. The following example shows the programming for a cake using Fan plus Y at 160 °C for 45 minutes. After entering the data ^ Place the cake in the oven and close –...
Entering a cooking duration Switching on and off Then set the end time: automatically ^ Turn the multi-function selector until triangle V is underneath the ) It is a good idea to set the oven to symbol in the display. switch on and off automatically when roasting.
Entering a cooking duration To check and change an entered time It is possible to check or change times f g ) entered for a cooking programme at any time by calling up the relevant symbol. The Start time (13:20 - 1:20 = 12:00 h) will show in the display, when you call To delete a set time up the f symbol.
System lock This oven is equipped with a System lock. This prevents the oven being switched on unintentionally, by children for example. To activate the system lock ^ Turn the multi-function selector clockwise. The system lock cannot be activated until you have activated P 4. See A key 0-§...
Safety lock This oven is also equipped with a Safety lock. Activating this lock prevents settings being changed during a programme. f g ) a To activate the safety lock Four horizontal bars will appear in the display. The safety lock cannot be activated until you have activated P 4.
Page 40
Safety lock De-activating the safety lock The cooking programme will stop, if – the programme selector is not turned Temperatures and times cannot be back to the original programme changed during a programme if the setting within 10 seconds. safety lock has been activated. –...
Altering oven settings v Some of the standard oven settings (which are set at the factory) have an alternative which you can select if required. See the chart over for a list of these settings. "S" appears in the display to let you The factory default settings are know that this setting can be altered.
Page 42
Altering oven settings v Oven setting Settings available (* factory default) S 0 * Clock display The clock display is switched off. The time of day display is switched off when the programme selector is turned to the "0" position. The time of day continues to run in the background.
Page 43
Altering oven settings v Oven setting Settings available (* factory default) P 5 Catalyser The catalyser is switched off, cooking odours (depending are not dissipated. on model) The catalyser is switched on for all cooking functions, cooking odours are dissipated. S 2 * The catalyser engaged for all functions except for Gentle Bake.
Page 44
Altering oven settings v Oven setting Settings available (* factory default) P 8 Fan run-on S 0 * The cooling fan run-on time is temperature controlled and will not switch off until the oven interior temperature is below 70 °C. The cooling fan run-on time is time controlled to switch off after 25 min.
Baking We recommend the following settings 1 tray = 1st shelf level from the for baking: bottom – Fan plus Y 2 trays = 1st and 3rd shelf levels from the bottom – Intensive bake F 3 trays = 1st, 2nd and 4th shelf levels –...
Baking Conventional CB Tips on baking Only use dark baking tins with a Refer to the baking chart and the matt finish. cookery book supplied with this Bright, shiny tins will give an uneven oven for suggestions of or pale result, and in some cases the temperatures, shelf levels and times.
Page 47
Baking Frozen food Handling and preparing food When baking frozen products such as correctly is essential for maintaining cakes, pizza and baguettes, use the good health. lowest temperature quoted on the manufacturer’s packaging. Place such Only bake cakes, pizza, chips etc. items on baking parchment directly on until they are golden brown.
When roasting on the rack or in an open tin make sure the roasting filter Miele also offer Gourmet oven dishes is fitted in front of the fan in the back with lids which are ideal for roasting of the oven before starting.
Page 51
Roasting Temperature Older recipes and cookery books Please refer to the Roasting chart for New guidelines (German standard suggested temperatures. DIN 44547 has been replaced by European standard EN 60350) have led Do not select a higher temperature than to slight adjustments in oven that advised.
Page 52
Roasting Calculating the roasting time Pot roasting The roasting time will depend on the Season the meat and place in the pot. type of meat, the size and thickness of Add some knobs of butter or margarine the cut. or a little oil or cooking fat. Add about litre of water when roasting a large, The traditional British method is to allow lean joint of meat (2 - 3 kg) or roasting...
Roasting chart 1) 5) Food Recom- Auto Roast Conventional mended Temperature Time Temperature Time shelf in °C in mins. in °C in mins. level Roast beef (approx. 1 kg) 190 - 210 100 - 120 190 - 210 100 - 120 Beef fillet, approx.
Grilling Grill - full n Grill with the oven door closed. If you grill with the door open, hot air will escape from the oven instead of being cooled automatically by the cooling fan. Oven controls could get hot. Danger of burning! Always use the roasting filter when grilling.
Grilling Grilling on the rack temperature, continue grilling at a lower temperature setting to allow the food to cook through to the centre. Grilling times Grilling times for – Flat pieces of fish and meat usually need 6 – 8 minutes per side depending on their texture.
Grill chart Pre-heat the grill for at least 5 minutes with the door shut before grilling. Food to be grilled Recom- Grill / Grill - full Fan grill mended Temp. Total Temp. Total shelf level in °C grilling time in °C grilling time in mins.
Defrosting You can also use the oven for Do not refreeze food once it has defrosting. thawed. To defrost select Fan plus Y with a maximum temperature of 50 °C. For defrosting meat and delicate foods, use the lowest possible temperature (30 °C).
Cooking Gentle bake We recommend using the following oven settings: The Gentle bake function is ideal for – Fan plus gratins and bakes which require a crispy finish. – Conventional Use the first shelf level from the bottom. Cooking containers made of ovenproof glass, porcelain, china, and Food Temp.
E-Cloth long. Remove these straight away. A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, The appliance front and controls are which is suitable for cleaning surfaces susceptible to scratches and such as stainless steel, glass, plastic abrasions.
Page 60
Stainless steel surfaces powder cleaners and cream Stainless steel surfaces can be cleaned cleaners, using a Miele E-Cloth or with a – abrasive sponges, e.g. pot scourers proprietary non-abrasive cleaning or sponges which have been agent designed specifically for use on previously used with abrasive stainless steel.
Cleaning and care Accessories Remove all accessories as well as the runners and any extra accessories such as, for example, the baking carriage, or telescopic runners from the oven interior before starting the pyrolytic cleaning process. The high temperatures needed for pyrolysis will damage the accessories and cause irreparable damage to the baking carriage and telescopic runners.
Cleaning and care PerfectClean Normal soiling Clean as soon as possible after each Before using for the first time remove use with a dishcloth, soft sponge (such any stickers from PerfectClean as the Vileda sponge supplied with surfaces. ovens in the UK) or a soft nylon brush, and a solution of hot water and a little The enamelled surfaces of the baking washing-up liquid.
Page 63
Cleaning and care Apply a spray oven cleaner to the The following cause lasting damage soiled areas. Leave to take effect for a to the surface structure and reduce couple of minutes only! the anti-stick effect and must not be If necessary use a soft sponge (e.g.
Cleaning and care Oven interior Pyrolytic cleaning of the oven interior The oven interior and roof liner are Before starting a pyrolytic cleaning coated with dark pyrolytic enamel process please note the following which facilitates cleaning. advice: This is a particularly hard enamel with Remove any coarse soiling from the an extremely smooth surface.
Page 65
Cleaning and care During the pyrolytic process the oven is heated to approx. 460 °C . Any residual soiling is burnt off by the high temperatures. The oven door is automatically locked shortly after the pyrolytic cleaning The digit for the pyrolytic programme process starts.
Page 66
Cleaning and care After the pyrolytic process any debris The pyrolytic process will be (e.g, ash), can easily be wiped away. interrupted, – if the soiling levels in the oven are too Remember to wait until the oven has much for the programme to deal cooled down before doing so! with.
Cleaning and care ^ Then lift the door upwards as far as it To remove the oven door will go. Please note: the oven door is heavy and should be gripped firmly at both Do not attempt to take the door off sides when being removed or the hinge guides when it is in a horizontal position.
Cleaning and care To dismantle the oven door In the rare event that condensate has worked its way in between the glass panes, the door can be dismantled in order to clean in between the panes. Do not use scouring agents, abrasive sponges or brushes to clean the glass panes.
Page 69
Cleaning and care ^ Then carefully lift the middle panes ^ Replace the first of the middle panes. up and out. Make sure the cut-off corner is positioned at the top right hand ^ The individual panes can then be side.
Page 70
Cleaning and care ^ Finally replace the black printed inner ^ Lift the upper of the two middle pane. The print should face in panes up a little and refit the spacers towards the middle pane. to the panes. Then re-position them back next to the hinge guides.
Cleaning and care ^ Open the door fully. To refit the door ^ Flip both locking clamps back up to lock them. Turn them as far as they will go into a horizontal position. Make sure that the notches on the locking clamps hook into the slots on the door as illustrated.
Cleaning and care To remove the runners To remove the back panel Make sure the oven heating elements Make sure the oven heating are switched off and cool. elements are switched off and cool. Danger of burning. Danger of burning. ^ Remove the runners.
Some minor problems can be corrected without contacting the Miele Service Department. What to do if ..the oven does not heat up Check whether, ^ the system lock has been activated.
Page 74
Problem solving guide The glass cover is held in position by Do not touch the surface directly two metal brackets which are secured when changing the lamp as grease to the reflector. particles from your fingers will Do not push the metal brackets to adhere to the surface and damage the sides, as this would damage the lamp.
Page 75
Problem solving guide . . . a noise can be heard after a cooking process This is not a fault. The cooling fan continues to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or on the oven housing unit.
Page 76
"0". If the door lock will still – whether the correct shelf level was not open please contact the Miele used. Service Department. – "F55": the oven has automatically . . . there has been a power cut and switched itself off during use.
– your Miele Dealer appliance. These are shown on the data plate, – the Miele Service Department visible below the oven interior, with the (see back cover for contact details). door fully open. Please note that telephone calls may be monitored and recorded to improve our service.
Extra accessories The following accessories may come as Telescopic runners standard with some models. They are also available at extra cost from your Miele dealer or the Miele Spare Parts Department. Telescopic baking carriage The telescopic runners provide three shelf levels,...
Page 79
Extra accessories Pizza pan Gourmet oven dish The gourmet oven dish can be placed This circular pan is suitable for cooking in the oven directly on the runners. It pizzas, flat cakes made with yeast or has non-tip safety notches like the oven whisked mixtures, sweet and savoury tray to prevent it being pulled out too tarts, baked desserts, and can also be...
Ensure that these match the household mains supply. Please quote these data, and the model and serial number when contacting the Miele Ser- vice dept. Connection of this appliance should be made via a suitable isolator, which...
Page 81
Electrical connection UK, IRL, ZA The voltage and rated load are given Data relating to electrical connection on the data plate, visible when the oven will be found on the data plate, visible door is open. Please ensure that these when the oven door is open.
Please ensure that these match the household mains supply. Please quote these data, and the model and serial number when contacting the Miele Service dept. Wall oven Connection of this appliance should be The wall oven is suitable for connection made via a suitable isolator which to an a.c.
Installing the oven To ensure adequate ventilation to the Turn off the mains electricity supply oven once installed: to the isolator. provide a ventilation cut-out in ^ Connect the mains cable from the the housing unit as illustrated. oven to the isolator. do not fit a rear panel into the housing unit.
Page 84
Alteration rights reserved / 22 / 0605 M.-Nr. 06 234 950 / 03 en - GB (H 4330, H 4430)