Table of Contents
Advertisement
Using New Configuration
When a RAID set already exists, using the New Configuration command erases the
existing RAID configuration data. If you do not want to delete the existing RAID set, use the
View/Add Configuration command to view or create another RAID configuration.
To create a RAID set using the New Configuration option
From the Management Menu, select Configure > New Configuration, and then
1.
press <Enter>.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Configuration And Start A New Configuration
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Follow step 2 to 9 of the previous section: Using Easy Configuration.
2.
Select Size from the Virtual Drive menu, and then press <Enter>.
3.
4.
Key-in the desired virtual drive size, and then press <Enter>.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
LD
Management Menu
Configure
0
Initialize
Objects
Rebuild
Check Consistency
Enter VD Size: 152146_
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Follow step 10 to 14 of the previous section: Using Easy Configuration to create the
5.
RAID set.
Z9PE-D16-10G Series
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
BIOS Version
Virtual Drive(s) Configured
Easy Configuration - ARRAY SELECTION MENU
RAID
Size
#Stripes
PORT #
1
148.580GB
0
ONLIN A00-00
1
ONLIN A00-01
Virtual Drive 0
2
READY
RAID = 1
3
READY
Units= MB
Size = 152146MB
DWC
= OFF
RA
= On
Accept
SPAN = NO
Enter VD Size:
A.10.09231523R
A.10.09231523R
StripSz
Status
2
64KB
ONLINE
5-11
Advertisement
Table of Contents
