Related Manuals for Honeywell HCD92534
Summary of Contents for Honeywell HCD92534
-
Page 1: User Guide
HCD92534 True Day/Night IR Camera NTSC HCD92534 HCD92534X User Guide Document 900.0865 – Rev A – 04/07... - Page 2 Revisions Issue Date Revisions 04/07 New document...
-
Page 3: Explanation Of Graphical Symbols
Warnings Installation and servicing should be performed only by qualified and experienced personnel to conform to all local codes and to maintain your warranty. WARNING! 12 VDC/24 VAC models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. -
Page 4: Fcc Compliance Statement
FCC Compliance Statement Information to the User: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 5 Precautions • Please ensure that your installation area can support the weight of the camera. • Do not install the camera in extreme temperature conditions. Only use the camera where temperatures are between -13°F and 122°F (-25°C and 50°C). Be especially careful to provide ventilation when operating under high temperatures.
-
Page 7: Table Of Contents
Contents Introduction ..........8 Features . -
Page 8: Introduction
Introduction The Honeywell HCD92534 Color IR camera is designed for exceptional value and performance and is ideally suited for use in day-to-day surveillance applications. The off-the-shelf feature set is designed for high picture quality in standard applications and the HCD92534 requires little to no adjustment after installation. -
Page 9: Before You Begin
Keep this guide for future reference. Unpack Everything Check that the items received match those listed on the order form and packing slip. The HCD92534 packing box should include, in addition to this User Guide: • One HCD92534 camera •... -
Page 10: Installation
Installation The HCD92534 camera is designed for installation on a wall or ceiling. The HCD92534 is weather sealed for indoor or outdoor locations. Attaching the Camera Position the camera to the desired mounting location on a wall or ceiling. Be sure the location is solid on a flat, smooth surface (for example, a crossbeam). -
Page 11: Lens Setup
Lens Setup Adjusting the Zoom and Focus of the Lens The zoom and focus adjustment is accessible at the underside front end of the camera housing. Figure 2 Lens Controller Focus adjustment screw Zoom adjustment screw Use a flathead screwdriver to adjust the zoom and/or focus. To adjust the focus turn the focus screw counter-clockwise for near focus and clockwise for far. -
Page 12: Camera Settings
Camera Settings Camera Functions Figure 3 Camera Controller VIDEO-TEST LUX LEVEL 1 STEP LEFT RIGHT 2 STEP DOWN SETUP (MENU) PUSH DOWN 3 STEP LED-LEVEL 4 STEP Legend # Description Video-test monitor output connector LUX-level adjustment DIP switches. Only one switch should be on at a time. They modify the point at which the lux threshold (level of light) changes the mode of operation (color or B/W). -
Page 13: Connecting The Camera
Connecting the Camera Connect the BNC video output connector to the video-in connector on your monitor or video recorder. Connect the camera to a power supply appropriate for your installation (12 VDC or 24 VAC). Document 900.0865 Rev A 04/07... -
Page 14: Programming
Programming OSD Menu Structure The HCD92534 menu system consists of one main SETUP MENU (see Figure for easy camera programming. Press down on the SETUP (MENU) control (see Figure 3) to display the SETUP menu. Figure 4 Menu Structure <<SETUP MENU>>... -
Page 15: Setup Menu Functions
SETUP Menu Functions Menu Item Option Description LENS Selects Lens type (the HCD92534 only supports DC VIDEO mode at this time; choosing any other mode may cause MANUAL incorrect/unpredictable camera operation). SHUTTER Adjusts shutter settings. Flickerless mode (FLK) reduces on-screen flickering. -
Page 16: Special Menu
SPECIAL Menu On the SETUP menu, press the menu control UP or DOWN and then select SPECIAL. Press the SETUP (MENU) control to access the SPECIAL menu. Figure 5 SPECIAL Menu <<SPECIAL MENU>> CAMERA ID COLOR AUTO SYNC MOTION DET SPECIAL PRIVACY MENU... -
Page 17: Special Menu Functions
SPECIAL Menu Functions Menu Item Option Description CAMERA ID Sets a name to be displayed on the monitor. See Adding a Camera Title Display. AUTO COLOR Sets the camera to either automatic color/black and white or full-time color mode. SYNC Synchronizes the vertical interval sync pulse of your camera with other equipment to reduce the effect of picture roll on the monitor. -
Page 18: Sync Control/Line-Lock Setup
Press the menu control UP, DOWN, LEFT, or RIGHT to select a character, then press SETUP (MENU) to accept it. The character is saved and the title cursor at the bottom of the screen moves to the next position. You can use symbols to go back or forward in the title name to make changes, "... -
Page 19: Motion Detection Setup
Motion Detection Setup Set up to four areas of the screen to detect moving objects. The screen will display MOTION DETECTED along with the number of movements counted. Figure 8 Motion Detection Setup MOTION DETECTION AREA SEL AREA 1 AREA STATE |..|....| 10 DOWN |..|..| 25... -
Page 20: Privacy Mode Setup
Privacy Mode Setup Set up to four areas of the screen for privacy mode (that is, the camera will not record video in these areas). Figure 9 Privacy Mode Setup PRIVACY AREA SEL AREA 1 AREA STATE AREA TONE |....|...| 80 |..|....| 10 DOWN |..|..| 25... -
Page 21: Warranty And Service
Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective product returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service at 1.800.796.CCTV (North America only) for assistance or to request a Return Merchandise... -
Page 22: Dimensions
HCD92534 (NTSC) HCD92534X (PAL) IR LEDs 850 nm, 49 LEDs IR Illumination Distance 75 ft (24 m)–110 ft (33.5 m), depending on scene reflectivity Digital Noise Reduction Off/Low/Middle/High Digital Slow Shutter x2–x128 Electrical Input Voltage 12 VDC/24 VAC Input Range 11–16 VDC, 17–28 VAC... -
Page 23: Mounting Template
Mounting Template Figure 10 Mounting Template Scale 1:1 Mounting screw holes (8/32 inch diameter) See “Attaching the Camera” on page 10 for information on using the mounting template. Note The camera enclosure should be mounted on a flat, smooth surface. Document 900.0865 Rev A 04/07... - Page 24 HVSsupport@honeywell.com Document 900.0865 – Rev A – 04/07 © 2007 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof.