Page 1
OWNER’S MANUAL LED MONITOR (LED TOUCH MONITOR) Please read this manual carefully before operating your set and retain it for future reference. LED MONITOR(LED TOUCH MONITOR) MODEL LIST 23ET83V www.lg.com...
TABLE OF CONTENTS TABLE OF CONTENTS LICENSE TROUBLESHOOTING ASSEMBLING AND PREPAR- SPECIFICATIONS Preset Modes (Resolution) Unpacking HDMI TIMING Parts and buttons Moving and Lifting the Monitor Indicator Setting up the Monitor - Mounting on a table PROPER POSTURE - Tidying cables Proper Posture for Using the Monitor USING THE MONITOR Connecting to a PC...
LICENSE LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on (Red) Lighting Off: Turned off (Power Button) MODE Button USB UP HDMI 2 HDMI 1 D-SUB IN DC-IN (19 V Connection panel...
ASSEMBLING AND PREPARING Moving and Lifting the Monitor Setting up the Monitor Mounting on a table When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe trans- Lift and tilt the Monitor set into its upright portation regardless of its shape or size.
Page 7
ASSEMBLING AND PREPARING Press the (Power) button on the front panel NOTE to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. WARNING Front Rear To avoid injury to the fingers when adjusting the screen, do not hold the upper part of the stand as shown below.
USING THE MONITOR Tidying cables Using the Kensington security system Gather and bind the cables with the supplied cable The Kensington security system connector is tie. located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com .
USING THE MONITOR USING THE MONITOR Connecting to a PC HDMI connection Transmits the digital video and audio signals from Your Monitor supports Plug & Play. When your PC or A/V to the Monitor. Connect the PC or connected to a PC and turned on, the device will A/V and the Monitor with the HDMI cable as shown connect automatically without configuration or user intervention.
Page 10
USING THE MONITOR Self Image Setting Function CAUTION Press the power button to turn on the monitor. When monitor power is turned on, the "Self Image Connect the signal Setting" Function is executed automatically. (Only input cable and tighten supported in Analog Mode) it by turning the screws clockwise.
USING THE MONITOR USB cable-PC connection Headphone port connection D-SUB OUT To use the touch screen, connect the USB port to Use the headphone port to connect a peripheral the PC. device to the monitor. Connect as illustrated. Use a USB 2.0 cable with A-B type to connect your (The USB port on the monitor is only for the touch screen feature.) (sold separately)
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Press the desired button on the bottom of the Monitor. Change the value of the menu item by pressing the buttons on the bottom of the Monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Customizing Settings MENU Menu Settings BRIGHTNESS CONTRAST Press MENU button on the bottom of the Monitor to WIDE / ORIGINAL WIDE display the MENU OSD. RESET Set the options by pressing the ◄ or ► or ▼ buttons. NEXT MENU Select the "NEXT MENU" button to enter the more option settings.
CUSTOMIZING SETTINGS PICTURE Press MENU button on the bottom of the Monitor set to display the MENU OSD. Select the "NEXT MENU" button to enter the more MENU > NEXT MENU > PICTURE option settings. SHARPNESS Select PICTURE by pressing the ► button. BLACK LEVEL HIGH OVER SCAN Enter to PICTURE by pressing the ▼ button.
CUSTOMIZING SETTINGS COLOR MENU > NEXT MENU > COLOR Press the MENU button on the bottom of the Monitor GAMMA set to display the MENU OSD. GAMMA 1 CUSTOM COLOR TEMP Select the "NEXT MENU" button to open more option settings.
CUSTOMIZING SETTINGS DISPLAY MENU > NEXT MENU > DISPLAY Press MENU button on the bottom of the Monitor set to display the MENU OSD. HORIZONTAL VERTICAL Select the "NEXT MENU" button to enter the more CLOCK option settings. PHASE Select DISPLAY by pressing the ► button. Open DISPLAY by pressing the ▼ button.
CUSTOMIZING SETTINGS OTHERS MENU > NEXT MENU > OTHERS Press MENU button on the bottom of the Monitor to display the MENU OSD. LANGUAGE ENGLISH POWER INDICATOR Select the "NEXT MENU" button to enter the more AUTOMATIC STANBY option settings. RESPONSE TIME FAST Select OTHERS by pressing the ► button. ...
3 W/h Saving Data depends on the Panel. Values will be different from each panel and panel vendor. LG calculated these values by using a “broadcast video signal” (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING...
CUSTOMIZING SETTINGS Picture Mode Picture Mode Press MODE button on the bottom of the Monitor set to display the Picture Mode OSD. Set the options by pressing the ◄ or ►buttons. Text Photo Cinema Game Custom Select EXIT to leave the OSD menu. EXIT Each option is explained below. Picture Mode Description PC Mode...
TROUBLESHOOTING TROUBLESHOOTING Nothing is displayed on the screen. Is the monitor's power cord plugged y Check if the power cord is correctly plugged in to the power outlet. Is the power indicator on? y Check the power cable connection and press the power button. Is the power indicator displaying y Check that the connected input is enabled (Menu - Input).
Page 21
Be sure to install the display driver from the display driver CD (or diskette) that driver? comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function. The screen is flickering.
Page 22
TROUBLESHOOTING Touch does not respond when the desktop is extended to a second touch monitor. In Windows 7 and Windows 8, you can configure the second monitor as the touch screen as shown below. (Control Panel -> Hardware and Sound -> Tablet PC Settings -> Setup -> Setup and click the screen of the second touch monitor) <Tablet PC Settings>...
SPECIFICATIONS SPECIFICATIONS LCD Screen Type 58.42 cm TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 58.42 cm Pixel Pitch 0.2652 mm x 0.2652 mm Resolution Maximum Resolution D-Sub (Analog) : 1920 x 1080 @ 60 Hz HDMI : 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Video Signal...
PROPER POSTURE PROPER POSTURE Proper Posture for Using the Monitor Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level. Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time us- age.
Page 26
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).