LCD TV SERVICE MANUAL CHASSIS : LA51D FACTORY NAME : 32LC2DC MODEL : 32LC2DC CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards.
SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service unit under test. manual and its supplements and addenda, read and follow the 2. After removing an electrical assembly equipped with ES SAFETY PRECAUTIONS on page 3 of this publication. devices, place the assembly on a conductive surface such as NOTE: If unforeseen circumstances create conflict between the aluminum foil, to prevent electrostatic charge buildup or...
Page 5
IC Remove/Replacement Some chassis circuit boards have slotted holes (oblong) through Circuit Board Foil Repair which the IC leads are inserted and then bent flat against the Excessive heat applied to the copper foil of any printed circuit circuit foil. When holes are the slotted type, the following technique board will weaken the adhesive that bonds the foil to the circuit should be used to remove and replace the IC.
5) CADTV : 01~135 Input Voltage 1) AC 100 ~ 240V 50/60Hz DU-37LZ55 : 120V, 60Hz Market NORTH AMERICA Screen Size 32 inch Wide For 32LC2DC Aspect Ratio 16:9 Tuning System LCD Module LC320W01-SL11 For 32LC2DC Operating Environment 1) Temp : 0 ~ 40 deg...
Page 7
5. Chroma & Brightness 5.1 CONDITION : EZ-Picture "Normal" Item Unit Remark White peak brightness cd/m HDMI input, full white Contrast Ratio 600:1 800:1 Brightness uniformity Refer to LCD SPEC. Color coordinate 0.640 +/- 0.03 0.341 +/- 0.03 GREEN 0.287 +/- 0.03 0.610 +/- 0.03...
ADJUSTMENT INSTRUCTION 1. Application Object 4. EDID(The Extended Display These instructions are applied to all of the LCD TV, AF-05FD. Identification Data)/DDC (Display Data Channel) download 2. Notes This is the function that enables “Plug and Play". (1) Because this is not a hot chassis, it is not necessary to use 4-1.
Page 12
7. Video(uPD) 7-1. Required Equipment MSPG925FA Pattern Generator-connector with Video Input 7-2. MSG925FA Adjustment (1) After select the model, input the #201(NTSC-M). (2) Receive the 100% Color Bar Pattern.(Pattern #33) (3) Select the Reverse button and select the signal as below figure.
Page 13
8. Shipping Conditions Item Condition Remark Input Mode TV02CH Volume Level Mute Aspect Ratio 16:9 Video EZ Picture Daylight Contrast Brightness Color Sharpness Tint Color-temperature Cool Audio Audio Language EZ SoundRite EZ Sound Normal Balance Treble Bass Front Surround TV Speaker Timer Auto clock Manual Clock...
SVC REMOCON FUNTION REAMARK To turn the TV on or off POWER To turn the TV on automatically if the power is supplied to the TV. (Use the POWER ON POWER key to deactivate): It should be deactivated when delivered. To activate the mute function.
TROUBLESHOOTING 1. Power Board 1-1. General Power Flow Start check Doesn't the It is identical Is the Interface screen whole come with Power Off signal operated? out? condition? 1. Check the Power Off 2. Check the Interface condition. signal condition. Doesn't the Doesn't the Doesn't the...
2. No Power (1) Symptom ● Does’t minute discharge at module. ● No front LED. (2) Check follow Power cord connected? Plug in power cord. Cable connecting the Line Filter Connect Cable. and Power Board connected? Is Fuse(F101) on Power Board Replace Fuse.
3. Abnormal Display 3-1. Does’t display the OSD (1) Symptom ● LED is green ● The minute discharge continuously becomes accomplished from module (2) Check follow Check the LVDS Is the LVDS cable Replace cable. cable? connected well? Reset cable. Replace Operates the Thine Check...
Page 18
3-2. In case of does’t display the screen into specific mode (1) Symptom ● The screen does not become the display from specific input mode (RF, AV, Component, RGB, DVI). (2) Check follow ● Check the all input mode should become normality display. (3) Abnormal display in RF mode Is the Tuner Cable Are the Input voltage, IIC Comm.
Page 19
(5) Abnormal display in Component 480i mode Is the Video Decoder Are the Input voltage, IIC Replace IC IC306 UPD64011 Comm. and HV sync good? good? Is IC400 Are the Input voltage, IIC Replace IC Scaler good? Comm. and HV sync good? (6) Abnormal display in Component DTV mode Is normal the IC104 Are the Input voltage, IIC...
Page 20
(7) Abnormal display in RGB DTV mode Is normal the IC101 Are the Input voltage, IIC Replace IC101 Comm. and HV sync good? CXA2181Q? Are the Input voltage, IIC Is normal the IC306 Replace IC306 MST9883C? Comm. and HV sync good? Is normal IC400 the Are the Input voltage, IIC Replace IC400...
4. No sound (1) Symptom ● LED is green ● Screen display but no audio (2) Check follow Check Speaker Is the SPK cable Replace SPK cable cable? connected well? Reset cable. Audio normal on Is the Flat cable IC1004 MSP4440K IC1002 NSP-2100A RGB/DVI? connected well?