Page 2
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 3
Standards and Recommendations Safety and Radio Interference Approvals This product is designed in conformity with the following standards or other normative documents : Safety : EN 60950-1:2002 : EN 55022/1998+A1:2000+A2:2003 EN 55024 :1998+A1:2001+A2:2003 EN 61000-3-2:2000 EN 61000-3-3:1995+A1:2001 to satisfy the basic requirements of Safety and EMC required by following Directives : EMC Directive 89/336/EEC Low Voltage Directive 73/23/EEC, 93/68/EEC Conformity with the above basic requirements is certified by means of the CE marking on the product.
HP Compaq L240w 24” Wide LCD Monitor 1. Introduction This manual contains instructions for installing and operating the HP Compaq L240w. HP Compaq L240w is a highly ergonomic color display unit. • 24” viewable WUXGA LCD • High quality screen re-scaling capability •...
Page 6
HP Compaq L240w 24” Wide LCD Monitor 2. Safety Information Avoid operating the monitor in extreme heat, (continued..) humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and correctly connected.
HP Compaq L240w 24” Wide LCD Monitor Cleaning and Maintenance • To avoid to risk of electric shock, do not disassemble the cabinet of display unit. The cabinet is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning.
HP Compaq L240w 24” Wide LCD Monitor 3. Installing the monitor The following items should be found in the packaging. 3-1. Packing List Power Cord Japan Signal Cable America/Canada Europe DVI Cable South Africa Australia Compact Disc Korea Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged.
HP Compaq L240w 24” Wide LCD Monitor 3-2. Selecting a suitable • Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. location • Place the monitor in a position where no light shines directly onto or is reflected on the screen.
Page 10
HP Compaq L240w 24” Wide LCD Monitor • Way to Connect 5. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section adjusting the picture in this guide for more information.
HP Compaq L240w 24” Wide LCD Monitor 3-4. Setting the refresh rate Follow the instructions below to set your refresh rate in your Microsoft Windows 98/ME/XP/2000/VISTA/7 operating system. Go to the Windows Control Panel. Double-click on Display Settings. Click on the Advance Settings tab.
Page 12
HP Compaq L240w 24” Wide LCD Monitor • Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of video card because the screen may not be displayed.
HP Compaq L240w 24” Wide LCD Monitor 3-6. User’s Environment Recommended Ergonomic User’s Environment. • Viewing angle of the monitor should be between 0~30 degree. • Supports Pivot. The screen can be vertically rotated by 90 degrees. This reduces the inconvenience of...
Page 14
HP Compaq L240w 24” Wide LCD Monitor Kensington Security • This display unit supports a Kensington-type security device to secure your monitor. Kensington lock is not included. (Locking) Slot • To purchase and install the Kensington locking device, please refer to the following contact information.
HP Compaq L240w 24” Wide LCD Monitor 4. Adjusting the picture You can adjust the screen display by using the buttons located below the screen. P ICT URE B righ tness Cont rast E X I T:ME NU M O VE:▼▲ A djust: –/+...
HP Compaq L240w 24” Wide LCD Monitor 4-1. Using the On Screen To make adjustments in the On Screen Display, follow these steps: Display MENU, SELECT Press the MENU button to display the OSD to the screen. Press the or button to choose the item you want, then Press the SELECT button.
HP Compaq L240w 24” Wide LCD Monitor 4-3. OSD Adjustments BRIGHTNESS P I C T U R E To adjust the brightness of the whole screen. • PICTURE B r i g h t ne s s CONTRAST C on t r a st To adjust the clarity of the whole screen.
Page 18
HP Compaq L240w 24” Wide LCD Monitor • SCREEN *This function is only available for VGA mode. Auto configure S C R E E N To adjust the Horizontal Position, Vertical A u t o C o n f i g u re Position, Clock, and Phase automatically.
Page 19
HP Compaq L240w 24” Wide LCD Monitor • Language OS D You can choose one of 6 languages. (English, L an g ua g e German, French, Italian, Spanish, or Korean) ► E n g l i s h H P o si t i o n H.
Page 20
HP Compaq L240w 24” Wide LCD Monitor • Setup Source S E T UP To switch between current source and the S o ur c e other input source (RGB/DVI). ► R GB A s pe c t ► 1 6 : 10...
HP Compaq L240w 24” Wide LCD Monitor 5. Display power If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features management from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle.
HP Compaq L240w 24” Wide LCD Monitor 6. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Possible solution Blank screen If the power LED is not lit, press the soft power switch or check the AC cord to turn the monitor on.
Page 23
HP Compaq L240w 24” Wide LCD Monitor Problem Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, Adjust the picture characteristics as described in the section shape or quality OSD Adjustment(4-3).
HP Compaq L240w 24” Wide LCD Monitor Problem Possible solution The power LED is LED Indicator can be orange color on changing of video mode an orange color or Input Signal. Check the Resolution and the frequency on the video part of your computer.
HP Compaq L240w 24” Wide LCD Monitor 7. Specifications 24” viewable, Diagonal, Pixel pitch 0.270mm, A-si TFT Display area 518.4(H) X 324(V), 24” Diagonal Number of color 16.7 million colors (6-bit Hi FRC) Input signals R.G.B Analog, 15pin D-sub / DVI-D Frequency rate Horizontal : 30.0 to 82.0KHz, Vertical : 56 to 75Hz...