Page 1
CANADA : http//biz.lgservice.com : http//www.lgservice.com : http//biz.lgservice.com PLASMA TV SERVICE MANUAL CHASSIS : PA-51D MODEL : 42PC3DV 42PC3DV-UD MODEL : 42PC3D 42PC3D-UD CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
An other abnormality exists that must be corrected before the receiver is returned to the customer. CANADA: LG Electronics Canada, Inc. 550 Matheson Boulevard East Mississauga, Ontario L4Z 4G3 : LG Customer Interactive Center P.O.Box 240007, 201 James Record Road Huntsville,...
DESCRIPTION OF CONTROLS Controls Controls - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. CHANNEL ( Buttons VOLUME ( V V OL Buttons ENTER ENTER ENTER Button MENU MENU MENU Button INPUT INPUT INPUT Button...
Page 5
DESCRIPTION OF CONTROLS Connection Options Connection Options - Here shown may be somewhat different from your TV. AV IN 2 AV IN 2 VI VI S-VIDEO Input AUDIO Input VIDEO Input VI VI AV OUT AV IN1 VI VI VI VI VI VI AV IN 1 AV IN 1...
Page 6
DESCRIPTION OF CONTROLS Remote Control Key Functions Remote Control Key Functions POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT Rotates the input mode between Antenna and Cable. In AV1- 2, Component 1-2, RGB-DTV (or RGB-PC), and HDMI/DVI input sources, screen returns to the last TV channel.
Page 7
DESCRIPTION OF CONTROLS VCR/DVD/DVHS/Camcorder BUTTONS Control some video cassette recorders or DVD players ("RECORD" button is not available for DVD player). DAY + / DAY- Moves forward or backward in 24 hour increments. VOLUME UP/DOWN Increases/decreases the sound level. CHANNEL UP/DOWN Selects available channels found with EZ scan and Manual scan.
32 ~ 104°F (0 ~ 40°C) Operating Humidity Range Less than 80% 42PC3D-UD: 1024 x 768 (Dot) Resolution 1366 x 768 (Dot) 42PC3DV-UD: 852 x 480 (Dot) • The specifications shown above may be changed without prior notice for quality improvement. - 8 -...
ADJUSTMENT INSTRUCTIONS 1. Application Object Each PCB Assy must be checked by Check JIG Set before These instructions are applied to all of the PDP TV, PA-51D. assembly. (Especially, be careful Power PCB Assy which can cause Damage to the PDP Module.) 2.
Page 11
ADJUSTMENT INSTRUCTIONS 6-3. Adjustment 7-3. Adjustment of White Balance (1) Select Component as the input with 100% Horizontal Operate the Zero-calibration of the CA-100, then attach Color Bar Pattern(HozTV31Bar) in 720p Mode and select sensor to PDP module surface when you adjust. ‘Normal’...
Page 12
ADJUSTMENT INSTRUCTIONS 8. Video(uPD)-Set 8-1. Required Equipment MSPG925FA Pattern Generator-connector with Video Input 8-2. MSG925FA Adjustment (1) After select the model, input the #201(NTSC-M). (2) Receive the 100% Color Bar Pattern.(Pattern #32) (3) Select the Reverse button and select the signal as below figure.
Page 24
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C202 0CK104DK56A 0.1UF 2012 50V 10% R/TP X7R C238 0CE476WH6DC 47UF MVK 25V 20% SMD R/TP(SMD) C202 0CK334CF56A 0.33UF 1608 16V 10% X7R R/TP C300 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C203 0CK473CK56A 47000PF 1608 50V 10% R/TP X7R...
Page 25
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C353 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C416 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C354 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C417 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C355 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R...
Page 26
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C468 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C533 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C469 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C534 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C470 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R...
Page 27
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C653 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C901 0CE476WH6DC 47UF MVK 25V 20% SMD R/TP(SMD) C654 0CE106WFKDC 10UF MVK 16V 20%,-20% C902 0CE476WH6DC 47UF MVK 25V 20% SMD R/TP(SMD) C655 0CK102CK56A 1000PF 1608 50V 0.1 R/TP X7R...
Page 28
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION CC106 0CK334CF56A 0.33UF 1608 16V 10% X7R R/TP R355 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R CC107 0CK334CF56A 0.33UF 1608 16V 10% X7R R/TP COIL CC108 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R L1013 6140VB0004B...
Page 29
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION 6631T20031J CONNECTOR ASSEMBLY,4P 2.0MM 800MM AR912 0RRZVTA001D 22 OHM 1 / 16 W 1608 5% 6631900050C CONNECTOR ASSEMBLY,10P 2.0MM 1200MM R126 0RN1002F409 10K OHM 1/6 W 1.00% TA52 JK101 6630G70016A CONNECTOR,D-SUB A03-7071-094...
Page 31
Jan., 2006 P/NO : 38289S0026A Printed in Korea CANADA: LG Electronics Canada, Inc. 550 Matheson Boulevard East Mississauga, Ontario L4Z 4G3 : LG Electronics Alabama, Inc. P.O.Box 240007, 201 James Record Road Bldg 3 Huntsville, AL 35824...
Page 35
MAIN(TOP) MAIN(BOTTOM) AV(TUNER) SIDE A/V(TOP) CONTROL PRE-AMP SIDE A/V(BOTTOM)
0IKE702900G IC101 KIA7029AF SOT-89 TP 2.9V IC900 0IMCRSJ001A SC1565IST-1.8 3P SOT223 IC102 0IPH740800M 74F08D 14P IC902 0ICTMLG018B LGDP4411 IEP2 LG IC 208P IC103 0ISO206900A CXA2069Q QFP64 BK I2C BUS AV S/W IC903 0IMCRTH002A THC63LVD103 64P IC103 0IPH741400E 74HC14D 14SOP IC906 0IPMGA0010A AZ1117H-3.3 SOT-223 3P R/TP 3.3V...
Page 39
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION Q112 0TR387500AA CHIP 2SC3875S(ALY) BK KEC C1004 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R Q113 0TR387500AA CHIP 2SC3875S(ALY) BK KEC C1005 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R Q114 0TR150400BA CHIP 2SA1504S(ASY) BK KEC...
Page 40
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C1053 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C1108 0CK103CK56A 0.01UF 1608 50V 10% R/TP X7R C1054 0CK103CK56A 0.01UF 1608 50V 10% R/TP X7R C1109 0CK104DK56A 0.1UF 2012 50V 10% R/TP X7R C1055 0CC471CK41A 470PF 1608 50V 5% R/TP NP0...
Page 41
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C1144 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C1326 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C1147 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C1327 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C1148 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R...
Page 42
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C205 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C304 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C205 0CK104DK56A 0.1UF 2012 50V 10% R/TP X7R C306 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C206 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R...
Page 43
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C360 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C427 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C361 0CC220CK41A 22PF 1608 50V 5% R/TP NP0 C428 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C363 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R...
Page 44
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C480 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C610 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C481 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C611 0CK102CK56A 1000PF 1608 50V 0.1 R/TP X7R C482 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R...
Page 45
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION C716 0CE476WH6DC 47UF MVK 25V 20% SMD R/TP(SMD) C907 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C717 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C908 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R C718 0CE476WH6DC 47UF MVK 25V 20% SMD R/TP(SMD)
Page 46
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION CC118 0CE477WF6DC 470UF MVK 16V 20% SMD R/TP(SMD) L207 6140VB0004B COIL,CHOKE 26UH CC119 0CE107WF6DC 100UF MVK 16V 20% R/TP(SMD) SMD L802 6140VB0004B COIL,CHOKE 26UH CC120 0CK104CK56A 0.1UF 1608 50V 10% R/TP X7R L803 6140VB0004B COIL,CHOKE 26UH...
Page 47
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION JK102 6612J10031A JACK,RCA PPJ209-02 5P SW105 140-313B SWITCH,TACT 2LEAD 160G(TA) JK103 6612J10031A JACK,RCA PPJ209-02 5P SW106 140-313B SWITCH,TACT 2LEAD 160G(TA) JK104 6612J00062N JACK,RCA PMJ030-02 6P SW107 140-313B SWITCH,TACT 2LEAD 160G(TA) JK105 6612F00099A...
Page 48
REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION L202 6200J000013 FILTER,EMC MLB-321611-0500P-N2 6851V00022D CABLE,COAXIAL UL1365#26 VW-1 250MM L203 6200J000013 FILTER,EMC MLB-321611-0500P-N2 6850TD9007E CABLE,D-SUB UL20276-9C(5.8MM) DT L1800 L204 6200J000013 FILTER,EMC MLB-321611-0500P-N2 6851V00019A CABLE,COAXIAL RF 4AC208A0 3M L205 6200J000013 FILTER,EMC MLB-321611-0500P-N2...
Page 49
32 ~ 104°F (0 ~ 40°C) Operating Humidity Range Less than 80% 42PC3D-UD: 1024 x 768 (Dot) Resolution 1366 x 768 (Dot) 42PC3DV-UD: 852 x 480 (Dot) • The specifications shown above may be changed without prior notice for quality improvement. - 8 -...
Page 50
LCD TV PLASMA TV MODELS: 32LC2D MODELS: 42PC3D 37LC2D 42PC3DV 42LC2D 50PC3D OWNER’S MANUAL Internet Home Page : http://www.lge.com http://www.lg.ca ENERGYSTAR is a set of power-saving Please read this manual carefully before operating your set. guidelines issued by the U.S.
Page 51
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. U.S.A. only ----------------------------------------------- COMPLIANCE: The responsible party for this product’s compliance is:...
Page 52
Safety Instructions Safety Instructions Safety Instructions WARNING : To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 53
Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table 14. Refer all servicing to qualified service personnel. specified by the manufacturer, or sold with the appa- Servicing is required when the apparatus has been ratus. When a cart is used, use caution when moving damaged in any way, such as power supply cord or the cart / apparatus combination to avoid injury from plug is damaged, liquid has been spilled or objects...
Page 55
Contents Auto Clock Setup Manual Clock Setup Time Menu On/Off Timer Setup Options Sleep Timer Auto Off Aspect Ratio Control Cinema 3:2 Mode Setup Caption Option Menu Caption/Text Features Caption Option Low Power (42PC3D/3DV, 50PC3D only) ISM (Image Sticking Minimization) Method (42PC3D/3DV, 50PC3D only) 52~53 Parental Lock Setup Lock Menu Options...
Page 56
Introduction Introduction Introduction Accessories Accessories Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the dealer from where you purchased the product. 1.5V Power Cord 75Ω Round Cable D-sub 15 pin cable Owner’s Manual Remote Control / Batteries...
Introduction Controls (Model Name: 32/37/42LC2D) Controls (Model Name: 32/37/42LC2D) - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. CHANNEL ( Buttons VOLUME ( Buttons ENTER Button ENTER ENTER MENU Button MENU MENU INPUT Button...
Page 58
Introduction Connection Options (Model Name: 32/37/42LC2D) Connection Options (Model Name: 32/37/42LC2D) - Here shown may be somewhat different from your TV. 32LC2D 37/42LC2D S-VIDEO Input S-VIDEO S-VIDEO AUDIO Input AUDIO AUDIO L/ L/MONO MONO VIDEO Input VIDEO VIDEO AV IN 2 AV IN 2 AV IN 2 AV IN 2...
Introduction Controls (Model Name: 42PC3D/42PC3DV/50PC3D) Controls (Model Name: 42PC3D/42PC3DV/50PC3D) - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. CHANNEL ( Buttons VOLUME ( Buttons ENTER ENTER Button MENU MENU Button...
Page 60
Introduction Connection Options (Model Name: 42PC3D/42PC3DV/50PC3D) Connection Options (Model Name: 42PC3D/42PC3DV/50PC3D) - Here shown may be somewhat different from your TV. AV IN 2 AV IN 2 S-VIDEO Input S-VIDEO S-VIDEO AUDIO Input AUDIO AUDIO L/ L/MONO MONO VIDEO Input...
Introduction Remote Control Key Functions Remote Control Key Functions POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT Rotates the input mode between Antenna and Cable. In AV1- 2, Component 1-2, RGB-DTV (or RGB-PC), and HDMI/DVI INPUT TV INPUT input sources, screen returns to the last TV channel.
Page 62
Introduction VCR/DVD/DVHS/Camcorder BUTTONS Control some video cassette recorders or DVD players ("RECORD" button is not available for DVD player). DAY + / DAY- INPUT TV INPUT Moves forward or backward in 24 hour increments. POWER MODE VOLUME UP/DOWN CABLE Increases/decreases the sound level. CHANNEL UP/DOWN Selects available channels found with EZ scan and Manual scan.
Page 63
Introduction INPUT Auto Link Auto Link INPUT TV INPUT POWER 1. When every external equipment is connected: MODE CABLE Antenna Cable Component1 HDMI/DVI RGB-DTV (or RGB-PC) Component2 GUIDE 2. When any external equipment is not connected: Antenna Cable RGB-DTV (or RGB-PC) HDMI/DVI ENTER 3.
Introduction Brief Info. Brief Info. What is Brief Info? : Brief Info shows the present screen information. INPUT TV INPUT : On Watching with the upper Input signal, press the INFO POWER button. How to use? MODE CABLE 1. Press the INFO button to show the Brief Info on the screen. 2.
Introduction EPG (Electronic Program Guide) EPG (Electronic Program Guide) INPUT TV INPUT (In DTV mode) (In DTV mode) POWER - This system has an Electronic Program Guide (EPG) to help your navigate through all the possible viewing options. MODE - The EPG supplies information such as program listings, start CABLE and end times for all available services.
Installation Installation Installation • The TV can be installed in various ways such as on a wall, or on a desktop etc. • The TV is designed to be mounted horizontally. GROUNDING Power Supply Ensure that you connect the earth ground wire to prevent pos- sible electric shock.
Page 67
Installation Installation Installation Basic Connection (For 32/37/42LC2D) Basic Connection (For 32/37/42LC2D) Connect the cables as necessary. After connecting the cables neat- ly, arrange the cables to the Cable Holder. To connect an additional equip- ment, see the External equip- ment Connections section. Cable holder 32LC2D 37/42LC2D...
Page 68
Installation Basic Connection Basic Connection How to use stand (For 42PC3D, 42PC3DV) Place the set with the screen facing down on Pull the stand out as shown. After unfolding the stand, please insert and a cushion or soft cloth as shown.
Page 69
It will also prevent the product from damage caused by fall. Please make sure that children don’t climb on or hang from the product. 42PC3D/42PC3DV/50PC3D 32/37/42LC2D Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
S-VIDEO AUDIO L/MONO VIDEO AV IN 2 AV IN 2 Installation External Equipment Connections External Equipment Connections NOTE: All cables shown are not included with the TV AV OUT S-VIDEO Antenna or Cable Connection AUDIO VIDEO AUDIO S-VIDEO VIDEO AUDIO L/MONO AV IN 1 COMPONENT IN...
Installation VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
Installation AV OUT VIDEO AUDIO S-VIDEO VIDEO AUDIO COMPONENT IN AV IN 1 When connecting with an S-Video cable Connect the S-VIDEO output of the VCR to the S- ANT IN VIDEO input on the set. The picture quality is S-VIDEO ANT OUT improved;...
RS-232C IN DIGITAL AUDIO HDMI/DVI IN (CONTROL & SERVICE) OPTICAL AV OUT Installation VIDEO AUDIO S-VIDEO VIDEO AUDIO AV IN 1 COMPONENT IN DVD Setup When connecting with a S-Video cable (R) AUDIO (L) S-VIDEO AV OUT V OUT MONO VIDEO VIDEO AUDIO...
Page 74
Installation When connecting with a component cable (R) AUDIO (L) RS-232C IN DIGITAL AUDIO HDMI/DVI IN (CONTROL & SERVICE) OPTICAL AV OUT V OUT MONO VIDEO VIDEO AUDIO UDIO S-VIDEO S-VIDEO VIDEO VIDEO AUDIO UDIO AV IN 1 V IN 1 COMPONENT IN COMPONENT IN Connect the video outputs (Y, P...
REMOTE AUDIO IN REMOTE RGB IN (RGB/DVI) CONTROL CONTROL IN RS-232C IN RS-232C IN DIGITAL AUDIO DIGITAL AUDIO HDMI/DVI IN HDMI/DVI IN (CONTROL & SERVICE) (CONTROL & SERVICE) AUDIO (RGB/DVI) OPTICAL OPTICAL RGB IN RGB (PC DTV) DTV) Installation HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.
Page 76
Installation When connecting with a Component cable Connect the video outputs (Y, P ) of the digi- Digital Set-top Box tal set-top box to the COMPONENT IN VIDEO jacks on the set. (R) AUDIO (L) Connect the audio output of the digital set-top box DIGITAL AUDIO RS-232C IN HDMI/DVI IN...
Installation Monitor Out Setup - The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV’s AV AV OUT V OUT OUTPUT jacks. See the Operating Manual of the second TV or MONO monitor for further details regarding that device’s...
RGB IN RGB (PC DTV) DTV) Installation PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable AUDIO IN AUDIO IN REMOTE REMOTE REMOTE REMOTE...
Page 79
Installation 1. To get the best picture quality, adjust the PC OSD display. Refer to the Manual of HDMI/DVI graphics card to 1024x768, 60Hz. Source Devices or contact your service center. 2. Depending on the graphics card, DOS mode may 6.
Page 80
Installation Screen Setup for PC mode - When RGB connect to PC input and select the RGB-PC, this function is used. - When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used. - In RGB-DTV mode, SIZE and PHASE is not available. - After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
Operation Operation Operation Basic operation Basic operation Turning on the TV 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT, CH button on the TV or press the POWER, TV INPUT, INPUT, CH , Number (0 ~ 9) button on the remote control .
Page 82
Operation On Screen Menus Selection and Adjustment On Screen Menus Selection and Adjustment How to adjust the OSD screen 1. Press the MENU button and then button to select each menu. 2. Press the button and then use D D / E E / F F / G G button to display the available menus.
Operation Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan SETUP SETUP EZ Scan Manual Scan Manual Scan ANTENNA Channel Edit VIDEO VIDEO Channel Edit CABLE DTV Signal DTV Signal AUDIO Input Source AUDIO Selection ( ) leads you Input Source to the EZ scan screen.
Operation Channel Edit EZ Scan SETUP EZ Scan SETUP Manual Scan Manual Scan Channel Edit Selection ( ) leads you Channel Edit VIDEO VIDEO to the channel edit screen. DTV Signal DTV Signal AUDIO AUDIO Input Source Input Source Input Label Input Label TIME TIME...
Operation Setup Menu Options continued Setup Menu Options continued DTV Signal Strength SETUP EZ Scan EZ Scan SETUP Manual Scan Manual Scan Channel Edit VIDEO Channel Edit VIDEO Normal Good DTV Signal DTV Signal AUDIO Input Source AUDIO Input Source Input Label Input Label TIME...
Operation Input Label EZ Scan EZ Scan SETUP SETUP Manual Scan Manual Scan Channel Edit Cable Box Channel Edit VIDEO VIDEO DTV Signal DTV Signal AUDIO AUDIO Input Source Input Source Component1 Input Label Input Label Component2 Set Top Box TIME TIME Set ID...
Operation ideo Menu Options ideo Menu Options EZ Picture - EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. FLASHBK - When adjusting Video menu options (con- EZ PIC trast, brightness, color, sharpness, tint, EZ PIC...
Operation EZ Picture-Custom Manual Picture Control ( option) EZ Picture SETUP SETUP Contrast Contrast Brightness VIDEO VIDEO Color AUDIO AUDIO Sharpness Tint TIME TIME Color Temperature Video Reset OPTION OPTION LOCK LOCK MENU Previous - Adjust the picture appearance to Press the MENU button and then use button to select the menu.
Operation Audio Menu Options Audio Menu Options Audio Language Audio Language SETUP SETUP Audio Language English EZ SoundRite EZ SoundRite Spanish EZ Sound EZ Sound French VIDEO VIDEO Balance Balance AUDIO Treble AUDIO Treble Bass Bass TIME TIME Front Surround Front Surround TV Speaker TV Speaker...
Operation EZ Sound - EZ Sound lets you enjoy the best sound without special adjustment because the TV sets the appropriate sound options based on the program content. FLASHBK EZ SOUND - When adjusting sound options FREEZE EZ PIC EZ SOUND (treble, bass, and front surround) manually, EZ Sound automati- ADJUST...
Operation Audio Menu Options continued Audio Menu Options continued Stereo/SAP Broadcasts Setup - This TV can receive MTS stereo pro- grams and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the FLASHBK original one.
Operation TV Speakers On/Off Setup Audio Language SETUP SETUP Audio Language EZ SoundRite EZ SoundRite EZ Sound EZ Sound VIDEO VIDEO Balance Balance AUDIO AUDIO Treble Treble Bass Bass TIME TIME Front Surround Front Surround TV Speaker TV Speaker OPTION OPTION LOCK LOCK...
Operation ime Menu Options ime Menu Options Auto Clock Setup SETUP Auto Clock SETUP Auto Clock Manual Clock Manual Clock Off Timer Off Timer VIDEO VIDEO On Timer Time Zone Eastern On Timer AUDIO AUDIO Sleep Timer Sleep Timer Daylight Auto Saving Auto Off...
Operation On/Off Timer Setup Auto Clock SETUP Auto Clock SETUP Manual Clock Manual Clock Off Timer Off Timer VIDEO VIDEO On Timer On Timer AUDIO AUDIO Sleep Timer Sleep Timer Auto Off Auto Off Time : 30 AM TIME TIME TV 2-0 OPTION OPTION...
Operation ime Menu Options continued ime Menu Options continued Auto Off Auto Clock Auto Clock If set to On and there is no SETUP SETUP Manual Clock Manual Clock input signal, the TV turns off Off Timer Off Timer automatically after 10 VIDEO VIDEO On Timer...
Operation Option Menu Features Option Menu Features Aspect Ratio Control - Lets you choose the way an ana- Press the RATIO button repeatedly to select the desired picture format. log picture with a 4:3 aspect ratio • You can also adjust in the menu.
Operation Option Menu Features continued Option Menu Features continued Cinema 3:2 Mode Setup Aspect Ratio Aspect Ratio SETUP SETUP Cinema 3:2 Mode Cinema 3:2 Mode Caption Caption VIDEO VIDEO Caption/Text Caption/Text AUDIO AUDIO Caption Option Caption Option Language Language TIME TIME ISM Method ISM Method...
Operation Caption/Text * Analog Broadcasting System Captions Aspect Ratio Aspect Ratio SETUP SETUP Cinema 3:2 Mode Cinema 3:2 Mode CC 1 Caption Caption VIDEO VIDEO CC 2 Caption/Text Caption/Text CC 3 AUDIO AUDIO Caption Option Caption Option CC 4 Language Language Text 1 TIME...
Operation Option Menu Features continued Option Menu Features continued Caption Option Aspect Ratio Aspect Ratio SETUP SETUP Style Custom Cinema 3:2 Mode Cinema 3:2 Mode Size A Standard Caption Caption VIDEO VIDEO Font Font 0 Caption/Text Caption/Text Text Color White AUDIO AUDIO Caption Option...
Operation ISM (Image Sticking Minimization) Method (42PC3D/3DV, 50PC3D only) Aspect Ratio SETUP Aspect Ratio SETUP Cinema 3:2 Mode Cinema 3:2 Mode Caption Caption VIDEO VIDEO Caption/Text Caption/Text AUDIO AUDIO Caption Option Caption Option Language Language TIME TIME ISM Method ISM Method Normal Low Power Low Power...
Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast- ing station.
Operation Parental Lock Setup * For U.S.A. SETUP Lock System SETUP Lock System Set Password Set Password Block Channel VIDEO VIDEO Block Channel Movie Rating Movie Rating AUDIO AUDIO TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General TIME TIME Input Block Input Block OPTION OPTION...
Reference External Control Device Setup External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. - Connect the serial port of the control device to the RS-232C jack on the TV back panel. - RS-232C connection cables are not supplied with the TV.
Reference Set ID Set ID - Use this function to specify a TV ID number. EZ Scan SETUP - Refer to ‘Real Data Mapping’. See page 56. Manual Scan Channel Edit VIDEO 1. Press the MENU button and then use button to select the D D / E E DTV Signal...
Page 105
Reference 01. Power (Command2:a) 05. Volume Mute (Command2:e) G To control Power On/Off of the TV. G To control volume mute on/off. You can also adjust mute using the MUTE button on Transmission remote control. [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 0 : Power Off 1 : Power On [k][e][ ][Set ID][ ][Data][Cr]...
Page 106
Reference 09. Color (Command2:i) 13. Remote Control Lock Mode (Command2:m) G To adjust the screen color. G To lock the remote control and the front panel controls on You can also adjust color in the Video menu. the set. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][m][ ][Set ID][ ][Data][Cr]...
Page 107
Reference 22. Tune Command (Command: m a) These functions are available in 42PC3D, 42PC3DV, 50PC3D models only. G To tune channel to following physical/major/minor number Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr] 18. ISM Method (Command2:p) G To avoid having a fixed image remain on screen.
Page 108
Reference 23. Channel Add/Del (Command: m b) G To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 0: Channel Delete 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x] 24. Key (Command: m c) G To send IR remote key code Transmission [m][c][ ][Set ID][ ][Data][Cr]...
Reference IR Codes IR Codes How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency = 1/T Duty ratio = T1/T = 1/3 G Configuration of frame...
Page 110
Reference Code (Hexa) Function Note INPUT R/C Button TV INPUT R/C Button POWER R/C Button (Power On/Off) POWER ON Discrete IR Code (Only Power On) POWER OFF Discrete IR Code (Only Power Off) RATIO R/C Button TIMER R/C Button 10 ~ 19 Number Key 0~ 9 R/C Button - (Dash)
Reference Programming the Remote Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode Test your remote control.
Reference roubleshooting Checklist roubleshooting Checklist The operation does not work normally. • Check to see if there is any object between the product and the remote control causing obstruction. The remote control • Are batteries installed with correct polarity (+ to +, - to -)? doesn’t work •...
Reference The audio function does not work. • Press the VOL or VOLUME button. Picture OK & • Sound muted? Press MUTE button. No sound • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? No output from one •...
Less than 80% Operating Humidity Environmental -4 ~ 140°F (-20 ~ 60°C) condition Storage Temperature Storage Humidity Less than 85% 42PC3D 42PC3DV 50PC3D MODEL (42PC3D-UD) (42PC3DV-UD) (50PC3D-UD) Dimensions including stand 44.4 x 29.5x 15.0 inches 44.4 x 29.5x 15.0 inches 51.3 x 34.3 x 14.0 inches...