hit counter code
Miele PT 7135 C Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. PT 7135 C
  6. Operating and installation instructions

Miele PT 7135 C Operating And Installation Instructions

Hide thumbs Also See for PT 7135 C:
Table of Contents

Advertisement

Quick Links

Operating and installation instructions
for condenser tumble dryer
PT 7135 C
G
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed, commissioned and
used for the first time.
M.-Nr. 06 511 380

Advertisement

Table of Contents
loading

Related Manuals for Miele PT 7135 C

Summary of Contents for Miele PT 7135 C

  • Page 1 Operating and installation instructions for condenser tumble dryer PT 7135 C To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed, commissioned and used for the first time.

  • Page 2: Caring For The Environment

    Caring for the environment Disposal of the packing supply by a competent person. The plug must be rendered useless and the material cable cut off directly behind it to The transport and protective packing prevent misuse. See the "Warning and has been selected from materials which Safety"...

  • Page 3: Table Of Contents

    Contents Caring for the environment ......... . 2 Disposal of the packing material .
  • Page 4 Contents Cleaning and care ..........26 Cleaning the fluff filters .
  • Page 5 Contents Technical data ........... 45 Settings menu J .

  • Page 6: Warning And Safety Instructions

    Faulty components must only be replaced by genuine Miele original Technical safety spare parts. Only when these parts are Before setting up the machine, fitted can the safety standards of the check it for any externally visible machine be guaranteed.
  • Page 7 If the water is drained externally must only be replaced with a through the drain hose instead of genuine Miele connection cable. being collected in the condensed water container, make sure the drain hose is In the event of a fault or for...
  • Page 8 Warning and Safety instructions Always keep the area around the – items which have not been machine free of dust and fluff. Dust thoroughly cleaned and which are drawn into the machine can over time still soiled with grease or oil, e.g. cause blockages in the condenser unit.
  • Page 9 Using accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims may be invalidated. Disposal of your old machine...

  • Page 10: Operating The Tumble Dryer

    Operating the tumble dryer Control panel a Display See the following pages for more information. b Start button c PC / Optical interface This is used by service technicians to run diagnostic checks on your machine and can also be used to update programming data in the future. d Multi-function selector This is used to select menu options (by turning it) and to confirm your selection (by pressing it).

  • Page 11: Displays

    Operating the tumble dryer Displays Entry menu Cottons Programme selection ... Minimum iron Settings F ... Woollens handcare 10:00 Smoothing When the machine is switched on, the entry menu with 4 favourite programmes (factory default settings which can be changed) will appear with Programme selection highlighted. Multi-function selector Turning the multi-function selector moves the highlighting to the next option.

  • Page 12: Settings Menu J

    Operating the tumble dryer Programme selection menu Programme Back A selection Cottons Minimum iron Woollens handcare ^ By turning the multi-function selector you can select any programme. The highlighting will move up or down depending on the direction the multi-function selector is turned in.

  • Page 13: Before Using For The First Time

    Before using for the first time Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Welcome screen When the tumble dryer is switched on for the first time, the welcome screen will appear.

  • Page 14: Notes On Laundry Care

    Notes on laundry care Care symbols – Down-filled garments have linings which have a tendency to shrink, Before drying check the drying symbol depending on the quality of the item. on the care label. If there are no They can be partially dried using the symbols, dry at your own risk! Smoothing programme.

  • Page 15: How To Dry Correctly

    How to dry correctly Brief instructions B Load the tumble dryer ^ Press the a button to open the door. The headings numbered (A, B, C ...) show the operating sequence and can ^ Load the laundry loosely into the be used as a brief guide to using your drum.
  • Page 16 How to dry correctly C Select a programme D Start the programme ^ Press the Start button. You can select a programme either by: – selecting a favourite programme, or The Start button will light up. – by going into the Programme –...
  • Page 17 How to dry correctly Estimated time remaining At the end of a programme Anti-crease action (if selected) and When a programme is selected the Finish will appear in the display at the estimated drying time will appear in the display. Please be aware that it is only end of the programme.

  • Page 18: Favourite Programmes

    The Save option must be activated via the Settings / Supervisor level menu before they can be programmed. This must be done by a Miele service technician. Selecting/changing a favourite ^ Close the door.
  • Page 19 Favourite programmes Important: If you do not make a selection in the sub-menu within approx. 20 seconds, the display will revert to the main menu. – Drying levels programme Cottons Normal+ Drying levels from Machine iron - Extra dry ^ Use the multi-function selector to select the drying level you want and confirm your selection.

  • Page 20: Low Temperature

    Favourite programmes Low temperature Cottons Normal+ Low temp. Duration: 1:47 h Low temp. B Timer Y Save Back A ^ Select Low temperature for all delicate or minimum iron fabrics with the r care label (e.g. acrylic garments). – Delicate fabrics are dried at a lower temperature. –...

  • Page 21: Timer

    The timer can be used to select when you want the programme to end (if this option has been activated by a Miele service technician). The programme start can be delayed to start automatically in 30 minute intervals up to a maximum of 24 hours.

  • Page 22: Programme Chart

    Programme chart Cottons Max. load: 6.5 kg* Extra dry, Normal+, Normal** Fabric Single and multi-layered cotton fabrics such as towelling, jerseywear, type underwear, flannelette bed linen. – Select Low temperature for fabrics with the r symbol. Notes – Select Extra dry for multi-layered and very thick fabrics. –...
  • Page 23 Programme chart Woollens hand care Max. load: 2.5 kg* Fabric Woollen fabrics. type Notes – To refresh and fluff up woollen garments quickly. Woollen fabrics are not dried completely by this programme. – Remove garments as soon as the programme has finished and leave to finish drying at room temperature.
  • Page 24 Programme chart Denim Max. load: 3.5 kg* Normal, Hand iron r Fabric Denim fabrics, e.g. jeans, jackets, skirts, shirts. type Shirts Max. load: 2.5 kg* Normal, Hand iron r Fabric Shirts and blouses. type Outerwear Max. load: 3.5 kg* Normal, Hand iron r Fabric Outerwear which is suitable for drying in a tumble dryer.

  • Page 25: Changing The Programme Sequence

    Do not touch the back of the drum when adding or removing * A Miele service technician can re-set items. The drum could be very hot - the payment system so that danger of burning.

  • Page 26: Cleaning And Care

    Clean the filters after your Miele dealer or the Miele Spare each drying programme*. Parts Department or use a vacuum cleaner.

  • Page 27: Cleaning Them With Water

    Cleaning and care Cleaning them with water Replacing the filters If there is a great deal of compacted Do not replace the filters if they fluff on any of the filters, they can be are damp or wet. Damp or wet filters removed and cleaned under hot could cause operational faults.

  • Page 28: Cleaning The Tumble Dryer

    ^ Dry all parts with a soft cloth. ^ A microfibre E-Cloth is available from the Miele UK Spare Parts Department which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the...

  • Page 29: Cleaning The Heat Exchanger

    Cleaning and care Cleaning the heat exchanger Check the heat exchanger unit regularly. It should always be cleaned immediately the Clean the heat exchanger or Clean the airways message appears. Removing the heat exchanger ^ Turn the lever on the inner cover downwards to the vertical position.

  • Page 30: Checking The Heat Exchanger Unit

    Cleaning and care If you cannot see any fluff: ^ Replace the heat exchanger unit (see following page). If you can see some fluff: ^ Clean the heat exchanger unit as described below. Cleaning the heat exchanger unit ^ When rinsing the heat exchanger unit, make sure you position it as shown in the next two illustrations.

  • Page 31: Replacing The Heat Exchanger Unit

    Cleaning and care When replacing the cover after cleaning, ensure that the rubber seal fits correctly into the groove. ^ Replace the cover making sure the hooks locate correctly. Hold it at an angle and push it gently downwards. ^ Then turn the lever upwards into the horizontal position to lock the cover.

  • Page 32: Problem Solving Guide

    To delete the fault in the display already. message: – Confirm with OK . There is a fault, if despite doing Contact the Miele Service this, the programme is Department. cancelled and the fault message appears again.
  • Page 33 Problem solving guide Problem Possible cause Remedy The dryer is reminding – Clean the heat exchanger. The following appears at the you that heat exchanger To delete the fault message: end of the unit needs cleaning. – Confirm with OK . programme: –...

  • Page 34: Other Problems

    Problem solving guide Other problems Problem Possible cause Remedy The drying In some circumstances the following message also appears: process goes Clean the airways . on too long or Please check all the possible causes and open and shut the even dryer door.
  • Page 35 Problem solving guide Problem Possible cause Remedy The heat exchanger The inner cover of the heat – Ensure that the heat unit service panel exchanger unit has not been exchanger unit is will not shut. locked properly and/or the positioned correctly and heat exchanger unit has not lock the cover.
  • Page 36 The lighting is defective if Contact the Miele Service The Start button is it does not come on when Department. flashing slowly. one of the buttons is...

  • Page 37: Changing The Lamp

    ^ Apply a little pressure and whilst doing so turn your wrist in the direction of the arrow to open the cover. The cover will open downwards. The temperature resistant lamp should only be ordered from your Miele dealer or the Miele Spare Parts Department.

  • Page 38: After Sales Service

    Service Department, please quote the Optional accessories for this dryer are model and serial number of your available from your Miele Dealer or from machine, both of which are shown on the Miele Spare Parts Department. the data plate situated on the right hand side below the drum aperture.

  • Page 39: Installation And Connection

    Installation and connection View from the front a Mains connection cable f External drainage options (e.g. via wash basin, wash basin drain outlet b Control panel or gully) c Door optional accessory: extension hose d Service panel for heat exchanger e Four height adjustable screw feet...

  • Page 40: View From The Side

    A stacking kit is b Steel plinth base (optional accessory, required which can be purchased from available open or closed) your Miele Dealer or the Miele Spare Parts Department. The stacking kit must be fitted by a Miele authorised service technician.

  • Page 41: Installation On A Concrete Plinth

    Payment system The dryer can be fitted with a payment system (optional accessory). This must be connected and programmed by a Miele Service technician. Coins / tokens must be removed from the payment system regularly, otherwise it will become blocked.

  • Page 42: Installation Site

    Installation and connection Installation site Make sure the dryer door can be opened without hindrance after installation. Transporting the machine to its installation site When moving the machine you can hold it by the lid where it protrudes to the rear of the dryer. To manoeuvre the dryer out of its packing case to its installation site you will also need to hold it by the front feet.

  • Page 43: External Drainage Of The Condensed Water

    Installation and connection External drainage of the condensed water The condensed water is pumped away through the drain hose which is located at the back of the dryer at the bottom. Drain hose length: ....2 m Delivery head: .

  • Page 44: Electrical Connection U.k

    Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out The fuse cover must be refitted when by a suitably qualified and competent changing the fuse, and if the fuse cover person, in strict accordance with is lost, the plug must not be used until a national and local safety regulations.

  • Page 45: Technical Data

    Technical data Height 850 mm (adjustable +7 / -7 mm) Width 595 mm Depth 700 mm Depth with door open 1188 mm Weight 58 kg Drum volume 130 litres Maximum capacity 6.5 kg dry weight Length of connection cable 1600 mm Voltage see data plate Connected load...
  • Page 47 Settings menu J for changing standard settings The Settings menu is used to alter the dryer's electronics to suit different requirements. Settings can be altered at any time.

  • Page 48: Settings Menu J

    Settings menu J To open the Settings menu Cottons Programme selection ... Minimum iron Settings F ... Woollens handcare 10:00 Smoothing ^ Select Settings J from the entry menu and confirm your selection with the multi-function selector. Selecting settings Settings Back A Language F ...

  • Page 49: Language J

    Settings menu J Language J Buzzer The display can be set to appear in When the buzzer function has been one of several different languages for activated, an audible tone sounds at the current programme. the end of a programme. To select the language you want, go The buzzer will still sound if there is a into the Languages J sub-menu.

  • Page 50: Display Contrast

    Settings menu J Display contrast Extending the cooling down time Display brightness The cooling down phase which takes There are ten different display place before the end of a programme contrast and display brightness can be lengthened if required. This settings.

  • Page 51: Settings/Supervisor Level Menu

    Settings/Supervisor level menu The Settings/Supervisor level needs to be activated by a Miele service technician. The Settings / Supervisor level is locked with a code to prevent it being accessed by non-authorised personnel (the Language J setting can still be altered).

  • Page 52: Drying Levels

    Settings/Supervisor level menu Select languages Drying levels The bar chart shows you the setting. You can select the order that you The machine is delivered with a want the languages available to medium settings set as standard. appear in in the display. –...
  • Page 53 Settings/Supervisor level menu Cleaning the airways Cleaning the heat exchanger Fluff should be removed after drying. Check the heat exchanger unit from The Clean the airways message will time to time and clean it if necessary. remind you to clean the filters when a The Clean the heat exchanger certain amount of fluff has collected.
  • Page 56 Alteration rights reserved/1505 M.-Nr. 06 511 380 / 00 en - GB...

Table of Contents