Table of Contents
Advertisement
Function board
Description
Function board
Before removing the function board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service doors (see
b.
Keyboard (see
c.
Hard drive
d.
Optical drive
e.
Top cover (see
Remove the function board:
1.
Position the top cover upside-down.
2.
Remove the Phillips PM2.0×3.0 screw (1) that secures the function board to the top cover.
3.
Slide the board toward the top of the top cover (2), and then lift it off the top cover (3).
Battery on page
Service door on page
Keyboard on page
55)
(Hard drive on page
45)
(Optical drive on page
Top cover on page
58)
42).
43)
49)
Component replacement procedures
Spare part number
767443-001
67
- Quick Links:
- Battery
- Hard Drive
- Rtc Battery, Hp 445 Models
Hide quick links:
Advertisement
Table of Contents
