Related Manuals for Miele W 1916
Summary of Contents for Miele W 1916
-
Page 1: Operating Instructions
Operating instructions for Washing machine W 1916 en - GB To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 060 830... -
Page 2: Caring For Our Environment
Caring for our environment Disposal of the packing Disposal of your old machine material Electrical and electronic machines often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for disposal human health and to the environment. -
Page 3: Table Of Contents
Contents Caring for our environment ......... 2 Warning and Safety instructions . - Page 4 Contents Detergent ............28 The correct detergent .
- Page 5 The Miele water protection system ........
-
Page 6: Warning And Safety Instructions
Any other usage is not supported by to property. the manufacturer and could be dangerous. Miele cannot be held liable To avoid the risk of accidents and for damage resulting from incorrect or damage to the washing machine,... - Page 7 If the connection cable is faulty it data on the data plate (voltage and must only be replaced by a Miele connected load) match the mains approved service technician to protect electricity supply. If in any doubt, the user from danger.
-
Page 8: Correct Use
Do not make any alterations to the washing machine, unless authorised to Flooding danger. do so by Miele. If hooking the drain hose into a wash basin, check that the water can drain off quickly enough to prevent the sink Correct use from overflowing. - Page 9 A lukewarm water immediately. If special descaling agent is available to swallowed, seek medical assistance order from the Miele Spare Parts immediately and retain the packaging Department or via the internet on or label for reference. Those with skin www.miele-shop.com.
-
Page 10: Operating The Washing Machine
Operating the washing machine Control panel a Display e Start/Stop button See the following page for more For starting the programme selected information. and cancelling a programme once it has started. b Temperature button f Extra option buttons For selecting a temperature. Various extra options can be added c Spin speed button to the washing programmes. - Page 11 Operating the washing machine Programme duration After the start of a programme, the estimated programme duration will appear in the display in hours and minutes. During the first 8 minutes the washing machine measures how much water is being absorbed by the laundry and uses this to calculate the load.
-
Page 12: Before Using For The First Time
Before using for the first time Setting the language Before using the machine for the first You will be asked to select the time ensure that it is correctly language you require for the display. It installed and connected. See is possible to change the language at "Installation and connection". -
Page 13: Washing Environmentally And Economically
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy – Do not exceed the amounts of usage are determined by the size of detergent recommended by the the load. manufacturer on the packaging. To make the most out of your –... -
Page 14: How To Wash Correctly
How to wash correctly Brief instructions If you use a solvent-based clean- The headings numbered A, B, C, . . . ing agent (e.g. one containing ben- show the operating sequence and can zene) to pre-treat a stain, make sure be used as brief instructions. - Page 15 How to wash correctly B Switch on the washing machine D Select a programme C Load the drum ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning.
-
Page 16: Extra Quiet
How to wash correctly F Select an extra option(s) Pre-wash The Pre-wash button is used for activating the Pre-wash option on its own as well as a Pre-wash with an additonal soak time of one or two hours. Press the button: x 1 = Pre-wash x 2 = Pre-wash + 1 h soak x 3 = Pre-wash +2 h soak... - Page 17 How to wash correctly G Add detergent It is important to dispense the correct amount, because ..too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch.
-
Page 18: Start The Programme
How to wash correctly H Start the programme Check that all items have been ^ Press the flashing Start/Stop button. removed from the drum. Items left in The estimated programme duration will the drum could discolour other items appear in the display once the in the next wash or become discoloured themselves. -
Page 19: Spinning
Spinning Final spin speed To omit the final spin (Rinse hold) ^ Select the Rinse hold (e) setting Programme using the Spin speed button. The Cottons 1600 laundry will not be spun and will Minimum iron 1200 remain suspended in the final rinse Delicates water. -
Page 20: Programme Chart
Programme chart Cottons cold to 95°C Max. load 7.0 kg Use for Cotton, linen or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Note – Selecting the 60°C wash temperature will give the performance of a Cottons 60°C programme, however for energy saving and environmental protection reasons the actual wash temperature reached will be lower. - Page 21 Programme chart Express 20 76* cold to 40°C Max. load 3.5 kg Use for Cotton and minimum iron garments that have hardly been worn or are only very lightly soiled. Note The Short extra option will be activated automatically. Automatic plus 7621* cold to 40°C Max.
-
Page 22: Extras
Extras The following extra options can be selected in addition to the programme: Cottons Minimum iron Delicates Woollens / Express 20 Automatic plus Dark garments / Denim Intensive plus Spin Separate rinse/Starch = The extra option is activated automatically as part of the programme but can be deselected. -
Page 23: Garment Care Label Symbols
Garment care label symbols Washing Ironing The figure quoted in the bucket is the The number of dots indicates the maximum temperature the garment ironing temperature can be washed at. The number of Hot iron (max sole plate temp. bars under the symbol indicates the approx. -
Page 24: Programme Sequence
Programme sequence Main wash Rinses Spinning Water Wash Water Rinses Interim Final level rhythm level spin spin 1)2) Cottons Minimum iron Delicates – Woollens / Express 20 Automatic plus Dark garments / – Denim 1)2) Intensive plus Spin – – –... - Page 25 Programme sequence d = Low water level Special features in the programme sequences: ( = Medium water level Anti-crease: e = High water level At the end of the programme, the drum a = Intensive rhythm continues to turn at intervals for up to b = Normal rhythm 30 minutes to help prevent creasing.
-
Page 26: Changing The Programme Sequence
Changing the programme sequence Cancelling a programme Changing a programme You can cancel a programme at any After the start of a programme it is no time after it has started. longer possible to select a different programme. ^ Press the Start/Stop button. Temperature Cancel programme ^ Press the flashing Start/Stop button... -
Page 27: Adding Or Removing Laundry After A Programme Has Started
Changing the programme sequence Adding or removing laundry Safety lock after a programme has started The safety lock prevents the machine ^ Press the Door button to open the from being opened and programmes drum door. from being cancelled during a wash programme. -
Page 28: Detergent
Do not use biological detergents on silk as the enzymes may damage the silk! Instructions for use and recommended dosage amounts are given on the detergent packaging. See "Optional accessories" at the end of this booklet for details of Miele branded care products including detergents and fabric conditioner. - Page 29 Liquid detergent For programmes with a pre-wash you will need to purchase a special container from the Miele Spare Parts Department which sits in the main wash compartment j. Add liquid detergent to this container for the main wash and...
-
Page 30: Water Softener
No visible dirt or stains. Possibly softener. slight body odour. Miele branded water softening tablets Normally soiled are available from the Miele Spare Parts Visibly dirty and/or just a few slight Department or via the internet on stains. www.miele-shop.com. Heavily soiled... -
Page 31: Fabric Conditioners And Liquid Starch
Detergent Fabric conditioners and liquid If starching frequently, thoroughly starch clean the dispenser compartment, Starch especially the siphon tube and Stiffens and gives body to items of fabric conditioner channel, regularly. laundry, e.g. shirts, tablecloths and bed See "Cleaning the detergent linen. -
Page 32: Cleaning And Care
Cleaning and care A range of Miele branded cleaning and Do not use solvents, abrasive conditioning agents is available to cleaners, glass cleaners or order from the Miele Spare Parts Department or via the internet at all-purpose cleaning agents. www.miele-shop.com. - Page 33 Cleaning and care Cleaning the siphon and conditioner If starching frequently, thoroughly channel clean the siphon, the siphon tube and the fabric conditioner channel regularly. A build-up of starch will cause them to get clogged. Cleaning the detergent dispenser drawer housing 1.
-
Page 34: Cleaning The Water Inlet Filters
Cleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valve: The washing machine has two filters to ^ Using pliers, carefully loosen the protect the inlet valves. ribbed plastic nut on the inlet valve These filters should be checked every and unscrew. -
Page 35: Problem Solving Guide
Problem solving guide With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. -
Page 36: The Following Fault Messages Appear In The Display And The Programme Stops
Problem solving guide The following fault messages appear in the display and the programme stops Remedy A Fault message Possible cause Drain – The water outlet is – Clean the drain filter and fault blocked or restricted. the drain pump. –... -
Page 37: The Following Fault Messages Appear In The Display At The End Of The Programme
Problem solving guide The following fault messages appear in the display at the end of the programme Fault message Possible cause Remedy Heating fault The washing machine Start the programme again. cannot heat. If the fault message appears again, contact the Service Department. -
Page 38: General Problems
Problem solving guide General problems Problem Possible cause Remedy The machine feet are not Level the machine (see The machine shakes during the spin cycle. level. "Installation and connection"). The laundry has not been The machine detected an Include both large and spun properly and is still imbalance during the final small items in the load as... -
Page 39: An Unsatisfactory Wash Result
Problem solving guide An unsatisfactory wash result Problem Possible cause Remedy Liquid detergents usually – Use a general purpose Liquid detergent does not give the contain no bleaching detergent containing a required result. agents. They do not bleaching agent. remove fruit, coffee and –... -
Page 40: The Drum Door Does Not Open When You Press The Door Button
Problem solving guide The drum door does not open when you press the Door button Possible cause Remedy Insert the plug in the socket and switch on and/or The machine is not switch the machine on with the _ button. connected to the electricity supply and/or is not switched on. -
Page 41: Opening The Drum Door In The Event Of A Blocked Drain Outlet And/Or Power Failure
Problem solving guide Opening the drum door in the Blocked drain outlet event of a blocked drain outlet If the drain outlet is blocked, up to and/or power failure 25 litres of water will be retained in the machine. ^ Switch the washing machine off. There is a lever behind the detergent Caution: if laundry has been drawer fascia panel. - Page 42 Problem solving guide Once the flow of water ceases: Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. To avoid loss of detergent, pour approx. 2 litres of water into the detergent dispenser drawer after cleaning the drain filter.
-
Page 43: After Sales Service
Miele service – your Miele Dealer or technicians during servicing work for testing purposes and for updating the – Miele (see back cover for contact machine's programme data. details). When contacting your Dealer or Miele, Appliance guarantee... -
Page 44: Installation And Connection
Installation and connection Front view a Inlet hose (tested to withstand h Control panel pressure of at least 7,000 kPa) i Drum door b Electricity supply cable j Access to drain filter, drain pump c - f Flexible drain hose (with and emergency release detachable swivel elbow) k Four height adjustable feet... -
Page 45: Rear View
Installation and connection Rear view a Protruding lid for holding when e Transport clip for inlet and drain moving the machine hoses b Electricity supply cable f Safety cap for transit bars c Inlet hose (tested to withstand g Transport clip for inlet and drain pressure of at least 7,000 kPa) hoses and for storing transit bars when not in use. -
Page 46: Installation Surface
(available from the 2. then use a screwdriver to release the Miele Spare Parts Dept). Otherwise catch at the top. there is the danger of the machine moving about and falling off the... - Page 47 Installation and connection ^ Using the spanner supplied, turn the ^ Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then ^ withdraw the transit bar. ^ withdraw the transit bar.
-
Page 48: Re-Fitting The Transit Bars
Installation and connection To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. -
Page 49: Levelling The Machine
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. -
Page 50: Building Under A Worktop
Installation and connection Building under a worktop Washer-dryer stack A Miele tumble dryer can be stacked The machine lid must not be with the washing machine. A WTV removed. stacking kit is necessary which can be purchased from your Dealer, the Miele... -
Page 51: The Miele Water Protection System
– Overflow protection system This prevents the washing machine taking in too much water. If the water The Miele water protection system level exceeds a certain level, the protects the washing machine from drain pump switches in and pumps water damage. -
Page 52: Connection To The Water Supply
The washing machine is not suitable for connection to a hot water supply. Maintenance and care Only use a genuine Miele hose should you ever need a replacement or extension. These are tested to withstand pressure of at least... -
Page 53: Connection To The Drainage System
If required, the drain hose can be extended to a length of 5 m. The necessary parts can purchased from the Miele Spare Parts Department or a Adapter your Miele dealer. b Nut * For a delivery head of more than 1 m (up to a max. -
Page 54: Electrical Connection U.k
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out The fuse cover must be refitted when by a suitably qualified and competent changing the fuse, and if the fuse cover person, in strict accordance with is lost, the plug must not be used until a current national and local safety suitable replacement is obtained. -
Page 55: Consumption Data
Consumption data Load Consumption data Energy Water Duration in kWh in litres Short Normal Cottons 95°C 7.0 kg 2.20 2 h 29 min 60°C 7.0 kg 0.80 2 h 59 min 60°C 3.5 kg 0.66 2 h 29 min 40°C 7.0 kg 0.70 2 h 34 min... -
Page 56: Technical Data
Technical data Height 850 mm Width 595 mm Depth 656 mm Depth with door open 1092 mm Height for building under 850 mm Width for building under 600 mm Weight 98 kg Capacity 7 kg dry laundry Voltage See data plate Connected load See data plate Fuse rating... -
Page 57: Programmable Functions
Programmable functions To select a programmable function The programmable functions are D Turn the programme selector until used to alter the machine's the programmable function you electronics to suit changing require appears in the display. requirements. E Press the Start/Stop button to confirm Programmable functions can be altered at any time. -
Page 58: Water Plus
Programmable functions Water plus Gentle action This programmable function is used Activating gentle action reduces the to select the water intake setting for drum action and is suitable for the Water plus extra option. washing slightly soiled items more gently. It should be activated for There are three different options: garments with a single bar under the care label and for articles which feel... -
Page 59: Code
Programmable functions Code A code can be used to lock the electronics on the washing machine ^ Press the Start/Stop button. to prevent it being used without your The following will appear in the display: knowledge. Code activated When the code has been activated, you have to enter a code after switching the Once the machine is switched off, it washing machine on. -
Page 60: Temperature Unit
Programmable functions Temperature unit Keypad tone You can chose for the temperature to An audible tone sounds each time a be displayed in button is pressed. °C/Celsius or °F/Fahrenheit. The machine is delivered with the The machine is delivered with keypad tone deactivated. -
Page 61: Standby Display
Programmable functions Standby display Memory To save energy, the display goes out The washing machine will store the and the indicator light for the Start/ most recently selected settings Stop button will start flashing slowly. (programme, temperature, spin speed and any extra options) in The display will always go out, memory once the programme has started. -
Page 62: Optional Accessories
Miele specialist detergents designed to suit the fabric being washed. Miele have also developed a "Outdoor wear" range of specialist CareCollection This specialist detergent will clean your detergents and conditioning products water-repellent outerwear with care. - Page 63 Fabric conditioner This liquid detergent is particularly suitable for cleaning coloured and dark The Miele fabric conditioner will give your laundry a fresh, natural fragrance. garments. The special formulation offers effective stain removal, even at It makes garments soft to handle and...
- Page 64 Alteration rights reserved/2211/W 1916 M.-Nr. 09 060 830 / 01...