hit counter code
Miele DA 420V-6 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Ventilation Hood
  5. DA 420V-6 EXT
  6. Operating and installation instructions
Miele DA 420V-6 Operating And Installation Instructions

Miele DA 420V-6 Operating And Installation Instructions

Rangehood
Hide thumbs Also See for DA 420V-6:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating and Installation Instruction, Instruction and Installation Manual
Operating and installation instructions
Rangehood
To prevent the risk of accidents or damage to the appliance, it is essen‐
tial to read these instructions before it is installed and used for the first
time.
en-AU
M.-Nr. 09 823 990

Advertisement

Table of Contents
loading

Related Manuals for Miele DA 420V-6

Summary of Contents for Miele DA 420V-6

  • Page 1 Operating and installation instructions Rangehood To prevent the risk of accidents or damage to the appliance, it is essen‐ tial to read these instructions before it is installed and used for the first time. en-AU M.-Nr. 09 823 990...

  • Page 2: Table Of Contents

    Contents Warning and Safety instructions ................4 Caring for the environment ................. 13 Description of the functions ................14 Con@ctivity 2.0 function ..................15 Guide to the appliance..................16 Operation (automatic mode) ................18 Cooking with Con@ctivity 2.0 (automatic mode) ........... 18 Leaving automatic mode temporarily..............
  • Page 3 Contents Connection for air extraction ................47 Silencer ........................48 Electrical connection ................... 49 Activating Con@ctivity 2.0 ................... 50 Installing the Con@ctivity 2.0 dongle..............50 Activating Con@ctivity 2.0 ..................50 Activating the rangehood.................. 50 Activating the cooktop..................50 Activation check ....................51 Deactivating Con@ctivity 2.0 .................

  • Page 4: Warning And Safety Instructions

     It must only be used to extract vapours and remove odours from cooking. Any other usage is at the owner's risk. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.  This appliance is not intended for use by persons (including chil‐...
  • Page 5 Warning and Safety instructions Safety with children  Young children must not be allowed to use this appliance.  Older children may only use the appliance when its operation has been clearly explained to them and they are able to use it safely, rec‐ ognising the dangers of misuse.

  • Page 6: Technical Safety

    Repairs and other work by unqualified persons could be danger‐ ous. Installation, maintenance work and repairs to electrical applian‐ ces must only be carried out by a Miele approved service technician.  A damaged appliance can be dangerous. Check it for visible signs of damage.
  • Page 7 Under no circumstances should any other parts of the housing be opened.  Faulty components must only be replaced by genuine Miele spare parts. The manufacturer can only guarantee the safety of the appli‐ ance when Miele replacement parts are used.
  • Page 8 Warning and Safety instructions Using at the same time as other heating appliances that depend on the air from the room  Warning - danger of toxic fumes Great care should be taken to ensure adequate ventilation when using the rangehood at the same time and in the same room or area of the house as another heating appliance which depends on the air in the room.
  • Page 9 Warning and Safety instructions In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the rangehood and the heater are in operation simultane‐ ously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible.

  • Page 10: Correct Use

    Warning and Safety instructions Correct use  Never use an open flame beneath the rangehood. To avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the rangehood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard.

  • Page 11: Correct Installation

    Warning and Safety instructions  Do not use the rangehood without the filters in place. This way you will avoid the risk of grease and dirt getting into the appliance and hindering its smooth operation.  The filters should be regularly cleaned or changed as appropriate. Saturated filters are a fire hazard.
  • Page 12 There is a fire risk if cleaning is not carried out in accordance with the instructions. Accessories  Use only genuine original Miele spare parts. If spare parts or ac‐ cessories from other manufacturers are used, the warranty will be in‐ validated, and Miele cannot accept liability.

  • Page 13: Caring For The Environment

    Caring for the environment Disposal of the packing mate‐ rial The transport and protective packing has been selected from materials which are environmentally friendly for dispos‐ al, and can normally be recycled. Recycling the packaging reduces the use of raw materials in the manufactur‐ ing process and also reduces the amount of waste in landfill sites.

  • Page 14: Description Of The Functions

    Description of the functions Depending on the model of the range‐ Recirculation mode hood, the following options are availa‐ (Applies to the DA 420V-6 only. A con‐ ble: version kit and charcoal filter are re‐ quired, which are available as optional Air extraction mode accessories: see "Technical Data")

  • Page 15: Con@Ctivity 2.0 Function

    Miele electric then after a short time, the fan also cooktop. comes on.

  • Page 16: Guide To The Appliance

    Guide to the appliance...
  • Page 17 The spacer frame creates a shadow gap between the tower and the ceiling. The rangehood can be installed with or without the spacer frame. g Recirculation grilles (only for recirculation mode, DA 420V-6 only) h Cooktop lighting i NoSmell active charcoal filter...

  • Page 18: Operation (Automatic Mode)

    Operation (automatic mode) If Con@ctivity 2.0 is activated, the ran‐ Reaction time gehood always operates in automatic The rangehood reacts with a slight de‐ mode (see "Activating Con@ctivity lay because altering the power setting 2.0"). on the cooktop does not immediately To operate the rangehood manually, result in a reduction or increase in see "Cooking without Con@ctivity 2.0".

  • Page 19: Switching Off

    Operation (automatic mode) Cooking process Switching off  If, for example, you switch on a cook‐  Switch off all cooking zones. ing zone at the highest power setting The rangehood fan will reduce its pow‐ to heat a pan for frying and reduce er level over the next few minutes and the power level after approx.

  • Page 20: Leaving Automatic Mode Temporarily

    Operation (automatic mode) Leaving automatic mode tem‐ Returning to automatic mode porarily The rangehood returns to automatic mode: To leave automatic mode temporarily during cooking:  if the rangehood has not been used for approx. 5 minutes after selecting  Manually select a different power set‐ a power setting manually, or ting, or ...

  • Page 21: Operation (Manual Mode)

    Operation (manual mode) Cooking without Con@ctivity With the run-on function the fan switches itself off automatically after a 2.0 (manual operation) pre-selected time. The rangehood can be operated man‐  After you have finished cooking, ually if: press the run-on function touch con‐ –...

  • Page 22: Switching The Cooktop Lighting On/Off

    Operation (manual mode) Switching the cooktop lighting Switching power management on/off on/off  Switch off the fan and the lighting. The cooktop lighting can be switched  Press the run-on control 515 for on and off and dimmed independently approx. 10 seconds, until the 1 lights of the fan.

  • Page 23: Operation (Automatic And Manual Modes)

    Operation (automatic and manual modes) Operating hours counter Fan power setting indicators 1 to IS show the time set: The number of hours the appliance has 1..........20 hours been in operation is stored in memory. 2..........30 hours When the grease filter symbol  or the charcoal filter symbol ...

  • Page 24: Activating And Altering The Operating Hours Counter For The Nosmell Active Charcoal Filter

    Operation (automatic and manual modes) Activating and altering the operating Reading the filter operating hours hours counter for the NoSmell active counter charcoal filter To check the percentage of time set al‐ The charcoal filter is needed for recircu‐ ready used: lation mode.

  • Page 25: Adjusting The Height Of The Canopy

    Operation (automatic and manual modes) Adjusting the height of the canopy The height adjustment feature on the canopy can be used to – – adapt the height of the rangehood to suit the installation conditions. – adjust the working area underneath the rangehood to the height of the user.

  • Page 26: Cleaning And Care

    (Original Miele Care product for  All external surfaces and controls can stainless steel) can also be used. Fol‐ be cleaned using warm water with a low the manufacturer’s instructions...

  • Page 27: Grease Filters

    Cleaning and care Controls Grease filters The re-usable metal grease filters in the Do not leave soiling on the controls appliance remove solid particles for any length of time. (grease, dust, etc.) from the kitchen va‐ Otherwise they may suffer discolou‐ pours, preventing soiling of the range‐...
  • Page 28 Cleaning and care Cleaning the grease filters in a dish‐ washer  Place the filters as upright as possi‐ ble in the lower basket, with the short sides upright, ensuring the spray arm is not obstructed.  Use a proprietary household dish‐ washer detergent.

  • Page 29: Nosmell Active Charcoal Filter

    After cleaning, the operating hours Replacement charcoal filters can be ob‐ counter needs to be reset. tained from Miele or via the internet at  Whilst the fan is switched on, press www.miele-shop.com (depending on the operating hours control  for country).

  • Page 30: Resetting The Operating Hours Counter For The Charcoal Filter

    Cleaning and care When to change the NoSmell active charcoal filter  Always replace the charcoal filter when it no longer absorbs kitchen odours effectively. It should, however be replaced at least every 6 months. The charcoal filter operating hours counter ...

  • Page 31: Installation

    Installation Before installation  Before installation, it is important to read the information given on the following pages as well as the 4 extension piece holders "Warning and Safety instructions" at for aligning and securing the telescopic the beginning of this booklet. extension piece Assembly parts 4 screws M4 x 8.5 mm...

  • Page 32: Appliance Dimensions

    Installation Appliance dimensions a Installation area: cut-out for feeding through the exhaust ducting, the mains ca‐ ble and with ...EXT models, the connection cable to the external motor. In recir‐ culation mode, only the mains cable is required. b Alternative installation with spacer frame c Ventilation grille positioned at the top for recirculation d A mains connection cable is required to connect the rangehood to the electrici‐...

  • Page 33: Safety Distance (S)

    Installation Safety distance (S) The minimum distances between the top of a cooktop (excluding trivets, dials - depending on model) and the bottom of the rangehood are as follows, unless a greater distance is specified by the manufacturer of your cooking appliance. See also "Warning and Safety instructions".

  • Page 34: Installation Recommendations

    Installation Installation recommendations Protective foil – When deciding on the safety dis‐ The housing components have protec‐ tance between the cooktop and ran‐ tive foil around them to prevent them gehood, please note that a distance from transport damage. of 650 mm above electric cooktops ...
  • Page 35 Installation  With air extraction mode: – Place a section of the exhaust duct‐ ing in the ceiling and feed it down through the cross-sectional area as illustrated. Exhaust ducting of ap‐ prox. 200 mm in length is required between the ceiling and the range‐ ...
  • Page 36 Installation  Use a knife to release the four spacers and the two covers from the spacer frame supplied.  Drill four holes  10 mm, approx. 115 mm deep for the plugs supplied.  Place the four plugs in the holes and screw in the 4 screws so that they ...
  • Page 37 For recirculation mode (UL), the directional unit from conver‐ sion kit DUI 32 (optional accessory, DA 420V-6 only) is installed and the telescopic piece turned upside down:  Loosen the two telescopic piece clamps from the installation frame.
  • Page 38 Installation  Fix the top part to the side of the in‐ stallation frame for now.  Loosen the fixing screws and remove the top part of the installation frame.
  • Page 39 Installation  Loosen the screws from the exhaust  Place the directional unit in the instal‐ socket and the hose inside and re‐ lation frame with the arrows pointing move the exhaust socket. It is not re‐ to the sides. quired for recirculation mode.
  • Page 40 Installation  Secure the hose to the directional unit socket using a hose clip.  Check that the hose is held securely.  Replace and secure the top part of the installation frame.
  • Page 41 Installation The spacer frame can be installed be‐ tween the tower and the ceiling. This creates a shadow which gives the illu‐ sion of a gap between the ceiling and the tower. This is useful if the ceiling is not level or is uneven. The rangehood is aligned vertically with the spacers sup‐...
  • Page 42 Installation  Mount the spacer frame onto the in‐  Hang the rangehood on the four stallation frame. screws, making sure the controls are at the front.  If using the spacer frame, place the two covers into the fixing holes.
  • Page 43 Installation  Place the exhaust ducting onto the exhaust socket.  For ...EXT models only: Connect the rangehood and the external motor using the connection cable.  Align the installation frame and se‐ cure it with the screws.  Connect the mains cable. See "Elec‐ The spacers, which were removed trical connection".
  • Page 44 Installation  Remove the grease filters from the rangehood.  Push the tower and the telescopic piece upwards and bend the retain‐ ing tabs outwards again to prevent the tower and telescopic piece from slipping down again.  Remove the safety screw for the tow‐ er on the inside of the frame.
  • Page 45 Installation  Fit the four telescopic piece clamps between the tower and the telescopic piece. The internal telescopic piece rests on the clamps. When the  Hold the tower securely, bend back screws are tightened, the clamps the retaining tabs and carefully lower spread out and push the telescopic the tower.
  • Page 46 Installation  Insert the safety screw on the inside.  Carefully remove the protective foil from the grease filters.  Refit the grease filters.  With recirculation mode (UL) range‐ hoods, insert the charcoal filter.

  • Page 47: Connection For Air Extraction

    Connection for air extraction – A reduction in diameter will compro‐  Before installation, it is important mise the extraction performance of to read the information given on the the rangehood. following pages as well as the "Ap‐ pliance dimensions" and the "Warn‐ –...

  • Page 48: Silencer

    Connection for air extraction  If the exhaust ducting is to run Air extraction with external motor through rooms, ceiling space etc. where there may be great variations in temperature between the different areas, the problem of condensation will need to be addressed. The ex‐ haust ducting will need to be suitably insulated.

  • Page 49: Electrical Connection

    Electrical connection If a flexible connection cable is being Installation, repairs and other work used to connect the appliance to the by unqualified persons could be electricity supply, the cross-sectional dangerous. The manufacturer cannot area of the individual leads must be be‐ be held liable for unauthorised work.

  • Page 50: Activating Con@Ctivity 2.0

    Activating Con@ctivity 2.0 Installing the Con@ctivity 2.0 Activating the rangehood dongle  Switch off the fan, cooktop lighting and cooktop. In order for the Con@ctivity 2.0 function to be used, the cooktop must be fitted  Press the run-on option control with the Con@ctivity dongle.

  • Page 51: Activation Check

    Activating Con@ctivity 2.0 The Con@ctivity 2.0 function can now top, the function must be deactivated be used. on both appliances and then the pro‐ cedure repeated. If you do not confirm your selection within 4 minutes, activation will not take Deactivating Con@ctivity 2.0 place.

  • Page 52: After Sales Service And Warranty

    After sales service and warranty In the event of a fault which you cannot remedy yourself, please contact Miele. The contact details for Miele are given at the back of these instructions. When contacting Miele, please quote the model and serial number of your appliance.

  • Page 53: Technical Data

    Fuse rating 10 A Weight DA 420V-6 37 kg DA 424V-6 45 kg DA 420V-6 EXT 34 kg DA 424V-6 EXT 42 kg Extraction power* according to EN 61591, extraction ducting  150 mm Setting 1 220 m³/h Setting 2 340 m³/h...
  • Page 56 DA 420V-6 DA 420V-6 EXT DA 424V-6 DA 424V-6 EXT  en-AU M.-Nr. 09 823 990 / 01...

This manual is also suitable for:

Da 424v-6Da 424v-6 ext

Table of Contents