Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Fujitsu LIFEBOOK U745
Summary of Contents for Fujitsu LIFEBOOK U745
- Page 1 System Operating Manual FUJITSU LIFEBOOK U745...
- Page 2 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2015 Fujitsu America, Inc.. All rights reserved B5FK-5531-01ENZ0-00...
- Page 3 FUJITSU LIFEBOOK U745 Operating Manual Declarations of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
- Page 4 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.
-
Page 5: Table Of Contents
Fujitsu Contact Information ........ - Page 6 Exiting BIOS Setup Utility ..............68 Fujitsu...
- Page 7 Appendix ................87 Fujitsu...
- Page 8 Index ................. . 103 Fujitsu...
-
Page 9: Declarations Of Conformity
Telephone: (408) 746-6000 Declares that product: Base Model Configuration: LIFEBOOK U745 Notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 10: Fujitsu Contact Information
Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or or Windows 8/8.1 operating system, you will need to go to the Support Site to download the... -
Page 11: Notational Conventions
Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. -
Page 12: Ports And Controls
(optional) 2 = Webcam LED 9 = Touchpad 3 = Status indicators 10 = Touchpad buttons 4 = ECO button 11 = Status indicators 5 = Wireless device switch 12 = Speakers 6 = ON/OFF button 7 = Microphone Fujitsu... - Page 13 7 = Smart Card reader (optional) 4 = Microphone port Right-hand side 1 = USB port 3.0 4 = External monitor port (VGA) 2 = USB port 3.0 (with charging function 5 = LAN connector (removable) (Anytime USB charge)) 3 = Display Port Fujitsu...
- Page 14 1 = Battery lock slider switch 1 5 = Hard disk access compartment 2 = Speaker 6 = Port for port replicator 3 = Battery compartment cover with 7 = Memory upgrade compartment rechargeable battery 4 = Battery lock slider switch 2 Fujitsu...
-
Page 15: Important Notes
Wash your hands after using the device. This notebook complies with the relevant safety regulations for data processing equipment. If you have any questions about setting up your notebook in the intended environment, please contact your sales outlet or our Hotline/Service Desk. Fujitsu... -
Page 16: Additional Safety Notes For Devices With Wireless Components
The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy saving functions as described in chapter "Using the energy saving functions", Page Fujitsu... -
Page 17: Traveling With Your Notebook
Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu... -
Page 18: Transporting The Notebook
If the notebook is exposed to water or other liquids with its connections open, liquid can penetrate the notebook and cause a malfunction. Do not continue to use the notebook. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at: "http://solutions.us.fujitsu.com/www/content/support/"). Fujitsu... -
Page 19: First-Time Setup Of Your Device
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu... -
Page 20: Choose A Location
► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack socket (DC IN) of the device. Fujitsu... -
Page 21: Switching On The Device For The First Time
There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu... -
Page 22: Working With The Notebook
Please refer to the notes in the chapter "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu... - Page 23 The indicator is illuminated: The Caps Lock key has been pressed. All the characters you type will appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Fujitsu...
-
Page 24: Switching The Notebook On
Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF button for approx. five seconds. ► Close the LCD screen. Fujitsu... -
Page 25: Keyboard
The following illustration shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustration may differ from your device. Alt Gr Fujitsu... -
Page 26: Key Description
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu... -
Page 27: Key Combinations
This key combination increases the brightness of the screen. Fn+F7 Screenbrightness Decrease the volume This key combination reduces the volume of the internal speakers. Fn+F8 Volume Increase volume This key combination increases the volume of the internal speakers. Fn+F9 Volume Fujitsu... -
Page 28: Country And Keyboard Settings
Shift stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Country and keyboard settings ► Make the country and keyboard settings as described in the documentation for your operating system. Fujitsu... -
Page 29: Application Keys
For a description of the indicator colors, see "Status indicators", Page Wireless device switch This application key is used to start the WirelessSelector software. The wireless components that have been activated in the BIOS Setup can be switched on and off individually. Fujitsu... -
Page 30: Touchpad And Touchpad Buttons
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu... -
Page 31: Dragging Items
LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a specific resolution. An optimal, clear picture can only be ensured in the resolution intended for the particular screen. A resolution which differs from the specification can result in an unclear picture. -
Page 32: Using Fingers
fingers together. Input fields With some apps, data must be entered, for instance an Internet address or your name or password. ► Tap on an input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu... -
Page 33: Webcam
The webcam automatically adjusts itself to the current light level. For this reason the LCD display may flicker while the light level is adjusted. Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam. Fujitsu... -
Page 34: Rechargeable Battery
Never store batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections. -
Page 35: Removing A Battery
► Slide the slider switch in the direction of the arrow (1) and hold it in place. ► Slide the slider switch in the direction of the arrow (2). ► Open the battery compartment cover (3). ► Remove the rechargeable battery from the battery compartment (4). Fujitsu... -
Page 36: Installing A Battery
Working with the notebook Installing a battery ► Insert the battery in the battery compartment (1). Fujitsu... - Page 37 ► Insert the catches of the battery compartment cover in the openings on the device (2). The battery compartment cover can only be closed if the battery is locked. ► Close the battery compartment cover (3). ► Slide the slider switch in the direction of the arrow (4). Fujitsu...
-
Page 38: Using The Energy Saving Functions
If you do not intend to use your notebook for a long period of time: ► Exit energy saving mode if necessary by moving the mouse, making an entry at the keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu... -
Page 39: Memory Cards
(see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu... -
Page 40: Speaker And Microphones
You can find information on connecting headphones and a microphone in chapter "Connecting external devices", Page Wireless LAN/Bluetooth components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the button to start the WirelessSelector. -
Page 41: Further Information On Wlan And Bluetooth
► Connect the network cable to your network port. Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu... -
Page 42: Your Port Replicator
6 = DVI-D monitor port 7 = External monitor port (VGA) The DVI port and neighboring Display Port cannot be used at the same time. When the port replicator is connected, the DisplayPort and VGA screen connections on the notebook cannot be used. Fujitsu... -
Page 43: Connecting The Notebook To The Port Replicator
► Disconnect the AC adapter cable from the DC input connector (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the port replicator. ► Place the notebook onto the port replicator (1) and ensure that it locks into place correctly. Fujitsu... -
Page 44: Connecting The Ac Adapter To The Port Replicator
If the notebook cannot be shut down properly, press the ON/OFF button on the port replicator for approx. four seconds. The notebook will switch off. However, any unsaved data may be lost in the process. Fujitsu... -
Page 45: Disconnecting The Notebook From The Port Replicator
We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu... -
Page 46: Security Functions
► Install the software to use the palm vein sensor (1). You can obtain further information on the palm vein sensor in the "appendix: Miscellaneous Information". Fujitsu... -
Page 47: Configuring The Fingerprint Sensor
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook. -
Page 48: Configuring Password Protection In Bios Setup Utility
The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu... -
Page 49: Password Protection For Booting The Operating System
► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu... -
Page 50: Password Protection For The Hard Disk
► Mark the TPM Security Chip Setting field and press the Enter key. ► Select the entry Disabled to disable the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will now reboot with TPM deactivated. Fujitsu... -
Page 51: Smart Card Reader
Do not use force when inserting and removing the Smart Card. Make sure that foreign objects do not fall into the Smart Card reader. ► Slide the Smart Card into the Smart Card reader with the chip facing upwards (or downwards depending on the device) and to the front. Fujitsu... -
Page 52: Connecting External Devices
For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu... -
Page 53: Connecting An External Monitor
You can also switch back and forth between the external monitor and the LCD screen of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu... -
Page 54: Connecting Usb Devices
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognized and installed by your operating system. Fujitsu... -
Page 55: Usb Port With Charging Function (Anytime Usb Charge)
You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp), even if the notebook is switched off. Fujitsu... -
Page 56: Connecting An External Sata Hard Drive (Esata) (Port Replicator Only)
► Click on the symbol for safe removal of hardware with the left mouse button. ► Select the device you wish to shut down and remove. ► Press the "Enter" key. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu... -
Page 57: Connecting External Audio Devices
The microphone port allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port of the notebook. Fujitsu... -
Page 58: Removing And Installing Components During Servicing
The equipment and tools you use must be free of static charge. • Remove the AC plug from the power outlet before inserting or removing boards. • Always hold boards by their edges. • Never touch connector pins or conductors on the board. Fujitsu... -
Page 59: Preparing To Remove Components
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu... -
Page 60: Remove The Cover
Removing and installing components during servicing Remove the cover ► Prepare for memory expansion, see "Preparing to remove components", Page ► Remove the screw (1). ► Lift the cover off the notebook (2). Fujitsu... -
Page 61: Removing A Memory Module
Installing a memory module ► Insert the memory module with the contacts and the recess (a) forward in the slot (1). Memory expansion Memory module ► Carefully push the memory module downwards until you feel it click into place (2). Fujitsu... -
Page 62: Attaching The Cover
Attaching the cover 1 1 1 1 1 ► Place the cover into position, following the direction of the arrow (1). ► Fasten the cover in place with the screw (2). ► Complete the memory expansion, see "Finishing component removal", Page Fujitsu... -
Page 63: Removing And Installing The Hard Disk
Removing and installing components during servicing Removing and installing the hard disk Removing the cover 1 1 1 ► Remove the screw (1). Fujitsu... -
Page 64: Removing The Hard Disk
► Lift the cover off the notebook (2). Removing the hard disk ► To release the hard disk from the contacts, pull the hard disk in the direction of the arrow (1). ► Remove the hard disk from the hard disk access compartment (2). Fujitsu... -
Page 65: Installing A Hard Disk
Removing and installing components during servicing Installing a hard disk ► Place the hard disk into the hard disk access compartment (1). ► Pull the hard disk in the direction of the arrow (2) until it engages in the contacts. Fujitsu... -
Page 66: Attaching The Cover
Removing and installing components during servicing Attaching the cover 1 1 1 ► Place the cover in the correct location (1). ► Tighten the screw (2). Fujitsu... -
Page 67: Finishing Component Removal
► Install the battery again, see "Installing a battery", Page ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu... -
Page 68: Settings In Bios Setup Utility
► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service center. The BIOS Setup Utility starts. Fujitsu... -
Page 69: Bios Setup Utility Operation
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu... -
Page 70: Exiting Bios Setup Utility
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu... -
Page 71: Troubleshooting And Tips
► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system. -
Page 72: The Notebook's Date Or Time Is Incorrect
► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu... -
Page 73: The External Monitor Is Blank Or The Image Is Unstable
► Charge the battery. ► Insert a charged battery. ► Connect the AC adapter to the notebook. The AC adapter is not connected properly. ► Check whether the AC adapter is properly connected to the notebook. ► Switch the notebook on. Fujitsu... -
Page 74: The Notebook Stops Working
The wireless component is switched on. Despite ► Check whether the wireless connection is this, the wireless connection to a network does enabled by the software. not work. ► Further information on using the wireless component can be found in the help files. Fujitsu... -
Page 75: Smart Card Reader Is Not Recognized
(for a charge). Smart Card lost Cause Troubleshooting Smart Card lost. ► If you are working in a network, contact your system administrator, who can boot your notebook with a Supervisor Smart Card. Fujitsu... -
Page 76: Error Messages On The Screen
Press <F1> to resume, <F2> to SETUP ► Press the function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu... - Page 77 ► Contact your sales outlet or our customer service center. System cache error - Cache disabled ► Contact your sales outlet or our customer service center. System timer error ► Contact your sales outlet or our customer service center. Fujitsu...
-
Page 78: Technical Data
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps • 802.11g. 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps • 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies Fujitsu... -
Page 79: Rechargeable Battery
**** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". 4-cell rechargeable battery Rated capacity 45 Wh... -
Page 80: Power Adapter
Rated voltage 100 V to 240 V (automatic) Rated frequency 50 Hz to 60 Hz (automatic) Secondary Rated voltage 19 V Max. rated current 3.42 A An additional AC adapter or AC cable can be ordered at any time. Fujitsu... -
Page 81: Manufacturer's Notes
Remember – protecting the environment is a cooperative effort, and we must make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"... -
Page 82: Ul Notice
For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction. Fujitsu... -
Page 83: Energy Star Compliance
To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment. -
Page 84: Declarations Of Conformity
This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu... -
Page 85: Fcc And Ic Regulatory Information
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. Fujitsu... -
Page 86: Déclaration D'industrie Canada
ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Fujitsu... -
Page 87: Déclaration De La Fcc/D'industrie Canada Sur L'exposition Aux Radiofréquences
: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel. -
Page 88: Avis Pour Le Canada
(ce qui signifie qu’ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences et/ou des dommages aux appareils de réseau exempts de licence. Fujitsu... -
Page 89: Appendix
That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu... - Page 90 Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases). Fujitsu...
- Page 91 Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Fujitsu...
-
Page 92: Deactivating/Disconnecting The Wlan Device
After you have configured your computer, you can connect to an active network by performing the following steps: 1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Fujitsu... -
Page 93: Troubleshooting The Wlan
Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu... - Page 94 LAN device to associate but not authenticate to the wireless network. Incorrect IP address This only applies to networks configuration using static IP addresses. Please contact your network administrator for the correct settings. Fujitsu...
-
Page 95: Using The Bluetooth Device
Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty. -
Page 96: Creating A Backup Of Bootable Disk And Recovery Image
Fujitsu Software Auto Installer. To make a copy of the recovery image to DVD disks, you will need three or four blank disks to create the copy. -
Page 97: Recover Your System When The Hard Drive Is Still Accessible
Appendix Creating a Backup of Essential Access Software When you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to “C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packages along with the extracted Auto Installer software package to a selected location. It is recommended that you save these packages to writable media or an external drive. - Page 98 To verify/change the boot-up priority (rather than booting-up from the hard drive or an external media drive), perform the following steps: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disk into the drive tray.
-
Page 99: Restore The Recovery Image From Hidden Partition
1. Press the Diagnostics Tool button to start the Diagnostics tool. 2. Read the note, and then click OK. 3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse. -
Page 100: Recover Your System When The Hard Drive Is Not Bootable
3. On the Recovery Tool - Partition Creation screen, move the slider to set disk size, and then click OK. 4. Click Yes in the Partition Creation confirmation dialog. WARNING: It is highly recommended that you send your product to Fujitsu Service to replace a hard drive. A mistake could possibly destroy your computer, your new hard drive or both. -
Page 101: Recovering Your Recovery Image Using Recovery And Utility
If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note: You will need the Bootable disk and Recovery Image disk set for this recovery. 1. Power on your system. When the Fujitsu logo appears on the screen, press the Enter key. -
Page 102: Installing The Software After The Recovery Image Is Restored
The below listed steps are applicable only in cases in which the recovery image restore and hidden partition contents have not been wiped out. 1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”. 2. Double-click on “Fujitsu Software Auto Installer” desktop icon. - Page 103 A message will be displayed during this time stating, “Please wait while the content is being processed”. 4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 5. The Fujitsu Software Auto Installer user interface will be launched providing ability to auto install the essential access software on the system.
-
Page 104: Downloading Driver Updates
Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download a list of the most current drivers, utilities, and applications to determine whether you have the latest versions. -
Page 105: Index
Boards 56 Bonus Apps 19 Fault Elimination 69 Fingerprint sensor 45 configuring 45 Caps Lock 24 First-time setup 17 Indicator 21 Fn key 24 Caps Lock key 24 Fn+F10 26 Charge capacity, battery 32 Fn+F2 25 Charging back-up battery 70 Fujitsu... - Page 106 47 Protecting with password 47 Operation, notebook 20 Main memory see memory expansion 57 Making ready to use 18 Mechanical security 45 Packaging 17 Memory card Palm vein sensor 44 handling 37 setting up 44 inserting 37 Fujitsu...
- Page 107 Forgotten 73 Status indicators 20 removing 47 Subwoofer 38 Using the security lock 45 Summer time 70 Supervisor password change 47 VGA socket 51 entering 46 Volume Forgotten 73 increase 25 removing 47 reduce 25 Switch off Volume control 38 Fujitsu...
- Page 108 Index Wireless LAN Webcam 31 Safety notes 14 Windows key 24 switching module off 90 Winter time 70 switching module on 90 wireless components Wrong date/time 70 Safety notes 14 Fujitsu...