Miele KFN 37452 iDE Operating And Installation Instructions page 65
Hide thumbs
Also See for KFN 37452 iDE:
- Operating and installation instructions (108 pages) ,
- Operating and installation instructions (116 pages)
Table of Contents
Advertisement
Problem
The compressor is
switching on more fre‐
quently and for longer
periods of time, so the
temperature in the ap‐
pliance is dropping.
The compressor comes
on less and less often
and for shorter periods
of time. The tempera‐
ture in the appliance
rises.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the com‐
pressor (depending on
model).
Cause and remedy
The temperature setting is too low.
Adjust the temperature.
A large amount of food is being frozen at once.
See "Freezing and storing food".
The Super cool function is still switched on.
You can switch off the Super cool function earlier
to save energy.
The Super freeze function is still switched on.
You can switch off the Super freeze function earli‐
er to save energy.
This is not a fault. The set temperature is too high.
Adjust the temperature.
Check the temperature again after 24 hours.
The food begins to defrost.
The room temperature is lower than the ambient tem‐
perature for which the appliance is designed.
Operating in a room which is too cold will cause the
compressor to switch off for too long, causing the
freezer to become too warm.
See "Installation - Location".
Increase the temperature of the room.
This is not a fault. The electronic unit for the com‐
pressor is equipped with an operation and fault diag‐
nosis LED indicator light which flashes every 15 sec‐
onds (depending on model).
Problem solving guide
65
Advertisement
Table of Contents
