Page 1
Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 093 450...
Contents Warning and Safety instructions ................4 Caring for the environment ................. 13 Modes of operation....................14 Con@ctivity 2.0 function ..................15 Guide to the appliance..................16 Operation (Automatic mode)................18 Cooking with Con@ctivity 2.0 (Automatic mode)........... 18 Leaving automatic mode temporarily..............20 Returning to automatic mode ................
Page 3
Contents Appliance dimensions.................... 34 Safety distance between hob and cooker hood (S)..........36 Installation recommendations................37 Connection for air extraction ................38 Silencer ........................39 Electrical connection ................... 40 Activating Con@ctivity 2.0 ................... 41 Installing the Con@ctivity 2.0 Stick................ 41 Activating Con@ctivity 2.0 ..................
They contain important notes on the safety, installation, use and maintenance of the appliance. Miele cannot be held liable for non-compliance with these instructions. Keep these instructions in a safe place and ensure that all users are familiar with the contents.
Page 5
Warning and Safety instructions The cooker hood can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance.
Page 7
The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele approved service technician. Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
Page 8
Warning and Safety instructions Using at the same time as other heating appliances that depend on the air from the room Warning - danger of toxic fumes Great care should be taken when using the cooker hood at the same time and in the same room or area of the house as another heating appliance which depends on the air in the room.
Page 9
Warning and Safety instructions In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heater are in operation simultaneously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible.
Warning and Safety instructions Correct use Never use a naked flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over a naked flame. When switched on, the cooker hood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard.
The distances given in "Installation" must be observed when fitting the cooker hood. Exhaust ducting must be of non-inflammable material. Suitable material is available from Miele specialist dealers or the Miele Spares Dept. The appliance must not be connected to a chimney or flue which is in use.
Page 12
– Do not throw old batteries away with your general household waste. Please dispose of them in a designated battery collection and recycling system. Accessories Only use genuine original Miele accessories with this appliance. Using accessories from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain valuable materials. They The packaging is designed to protect also contain materials which, if handled the appliance from damage during or disposed of incorrectly, could be transportation.
The flap is closed when the cooker an external motor have to be connected hood is switched off. to a Miele external motor located in a When the cooker hood is switched on, suitable position outside the room in the non-return flap opens for the which the cooker hood is installed.
Modes of operation Con@ctivity 2.0 function The hob transmits information about its operational status via a wireless signal Automatic control to the cooker hood. The cooker hood has a communication – When the hob is switched on, the facility which enables the automatic hob lighting comes on independently operation of the cooker hood and then after a short time the fan...
Page 17
Guide to the appliance a Edge extraction panels Optional accessories DRP 2900 Glass (4 panels) DRP 2900 Stainless steel (4 panels) b Hob lighting c Controls d Grease filters e Indicator light f Hob lighting control g Controls to select the fan power level The controls on the remote control are also used to switch the fan on and off.
Operation (Automatic mode) When Con@ctivity 2.0 is activated, the Reaction time cooker hood always works in automatic The cooker hood reacts with a slight mode (see "Activating Con@ctivity delay because altering the power level 2.0"). on the hob does not immediately result To operate the cooker hood manually, in a reduction or increase in cooking see "Cooking without Con@ctivity 2.0".
Operation (Automatic mode) Cooking process Switching off If for example you switch on a Switch off all cooking zones. cooking zone at the highest power The cooker hood fan will reduce its level to heat a pan for frying and power level over the next few minutes reduce the power level after approx.
Operation (Automatic mode) Leaving automatic mode Returning to automatic mode temporarily The cooker hood returns to automatic mode: To leave automatic mode temporarily during cooking: if the cooker hood has not been used for approx. 5 minutes after selecting ...
Operation (Manual mode) Cooking without Con@ctivity Switching the fan on 2.0 (Manual mode) Press the On/Off control . The cooker hood can be operated The fan will switch on at level 2. The manually if: symbol and 2 will light up in the power level display.
Operation (Manual mode) Selecting the run-on time It is advisable to run the fan for a few minutes after cooking has finished to neutralise any lingering vapours and odours in the air. With the run-on option the fan switches itself off automatically after a pre- selected time.
Operation (Manual mode) Power management If Power management is switched on, the 1 and IS indicators will light up The cooker hood features a power constantly. management system to help save If it is switched off, 1 and IS will flash. energy.
Operation (Automatic and Manual modes) Operating hours counters Press the run-on control 515 and the operating hours control at The number of hours the appliance has the same time. been in operation is stored in memory. The grease filter symbol and one of When the Grease filter symbol ...
Operation (Automatic and Manual modes) Activating and altering the charcoal Reading the filter operating hours filter operating hours counter counter Charcoal filters are needed for To check the percentage of time set recirculation mode. already used The charcoal filter operating hours ...
Energy saving tips This cooker hood operates very – Make sure that you switch the efficiently and economically. The cooker hood off after use. following will help you to save even If cooking vapours and odours still more energy when using it: need to be removed from the kitchen air after cooking, use the –...
Cleaning and care Casing General information The surfaces and controls are susceptible to scratches and abrasion. Please observe the following cleaning instructions. Before cleaning the cooker hood, please note the following: All external surfaces and controls can Make sure that you use a stable and be cleaned using hot water with a secure ladder.
To help prevent re-soiling, a An oversaturated filter is a fire proprietary conditioning agent for hazard. stainless steel (available from Miele) can also be used. Follow the Cleaning interval manufacturer’s instructions on the Grease which builds up on the edge packaging.
Page 29
Cleaning and care Removing the panels and grease filters The panels and the grease filters need to be removed for cleaning. During cooking, condensation forms on the panels which evaporates after cooking. To avoid this dripping on you, do not remove the panels for approximately two hours after cooking has finished.
Page 30
Cleaning and care Cleaning the panels and grease If a grease filter is inadvertently filters in the dishwasher replaced upside down, insert a small screwdriver blade into the slit to Place the panels and the grease disengage the clip. filters as upright as possible or at a slight angle in the lower basket, with the short sides upright, ensuring the...
Cleaning and care Resetting the grease filter operating The charcoal filter operating hours hours counter counter needs to be activated before using for the first time (see After cleaning, the operating hours "Operation"). counter needs to be re-set. Resetting the charcoal filter ...
Cleaning and care Remote control Cleaning the remote control Only clean the surface with a damp cloth. Do not use too much water to avoid moisture penetrating the casing. Changing the battery Use only the type of battery listed. Do not use rechargeable batteries.
Installation Before installation Before installation, it is important to read the information given on the following pages as well as the "Warning and Safety instructions" at the beginning of this booklet. Installation instructions See enclosed Installation sheet for instructions on how to install this appliance.
Page 35
There must be a minimum distance of 40 mm between the areas around the clamps and any structures or components, such as struts or cables. DA 2906 EXT - different appliance dimensions...
Installation Safety distance between hob and cooker hood (S) When planning the installation height of your cooker hood, the minimum safety distance between the top of a cooker or hob and the bottom of the cooker hood is as follows, unless a greater distance is specified by the manufacturer of your cooking appliance.
Installation Installation recommendations – We recommend a minimum distance of 700 mm and a maximum distance of 1300 mm. – Please be aware that if positioned too high, extraction will be inefficient. – To achieve optimum vapour extraction, the cooker hood must cover the hob.
Connection for air extraction – Ensure that all connections are If the cooker hood is used at the strong and airtight. same time as a heating appliance that relies on oxygen from the same Remember that any constriction of room, there is a risk in certain the air flow will reduce extraction circumstances of toxic fumes...
Connection for air extraction Silencer Extraction mode with external motor To minimise noise from the motor in the kitchen, the silencer should be positioned in front of the external motor To achieve even further reductions in if possible, or, if the ducting is long, noise levels, a special silencer (optional above the exhaust socket on the accessory) can be fitted in the ducting...
Electrical connection If the switch is not accessible after All electrical work should be installation (depending on country), an undertaken by a suitably qualified additional means of disconnection must and competent person in strict be provided for all poles. accordance with current national and For extra safety it is advisable to protect local safety regulations (BS 7671 in the appliance with a suitable residual...
Activating Con@ctivity 2.0 Installing the Con@ctivity 2.0 Activating the cooker hood Stick This is only possible via the cooker hood control panel, not via the In order to use the Con@ctivity 2.0 remote control. function, the hob must first be fitted with the Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0 Activating the hob Activation failed While the cooker hood is searching If connection cannot be established for a signal, start activating the hob. despite activating the Con@ctivity More information about this can be function on the cooker hood and found in the Operating instructions hob, the function must be for the hob.
Signing on/off the remote control If the connection has been lost between Signing on and off must be done at the the remote control and the cooker same time on the cooker hood and the hood, they must be signed on again. To remote control.
Page 44
Signing on/off the remote control Confirm the signing off procedure by pressing the run-on option control 515 on the cooker hood. All indicators will go out. Please bear in mind that disabling the signal will also disable any Con@ctivity 2.0 function and this will have to be activated again.
Miele dealer or the Miele Service Department. Contact details for Miele are given at the back of this manual. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions.
The DUU 2900 recirculation unit (optional accessory) is required for recirculation mode. Conformity declaration Miele hereby declares that the cooker hoods listed at the end of this booklet comply with the basic requirements and other relevant regulations of Guideline 1999/5/EC.
Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No. 66/2014 MIELE Model name / identifier DA 2906 Annual Energy Consumption (AEC 36,1 kWh/year hood Energy efficiency class A+ (most efficient) to F (least efficient)
Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No. 66/2014 MIELE Model name / identifier DA 2906 EXT Annual Energy Consumption (AEC 8,8 kWh/year hood Energy efficiency class A+ (most efficient) to F (least efficient)