Full hd 1080p resolution 100,000:1 dynamic contrast ratio picture wizard (2 pages)
Summary of Contents for LG 19LD350
Page 1
(Home Use)” setting. LG Customer Information Center Changing the factory default settings or enabling other fea- tures may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. P/NO : SAC34134201 (0910-REV00) www.lgusa.com / www.lg.ca / www.lgcommercial.com...
Do not attempt to modify this product in any way cable ground shall be connected to the grounding system without written authorization from LG Electronics. of the building, as close to the point of the cable entry Unauthorized modification could void the user’s as practical.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience Keep these instructions. receptacles, and the point where they exit from Heed all warnings. the apparatus. Follow all instructions. Do not use this apparatus near water.
Page 4
SAFETY INSTRUCTIONS Never touch this apparatus or antenna during WARNING - To reduce the risk of fire or electrical a thunder or lighting storm. shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands.
Page 5
A A N N T T E E N N N N A A S S V V e e n n t t i i l l a a t t i i o o n n O O u u t t d d o o o o r r a a n n t t e e n n n n a a g g r r o o u u n n d d i i n n g g Install your TV where there is proper ventila- tion.
LG HDTV has to offer. CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode. LG TV include a unique invisible speaker system, Detailed calibration requires a licensed technician. tuned by renowned audio expert, Mr. Mark Levinson.
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 1.5V 1.5V Remote Control, Owner’s Manual Power Cord CD Manual Batteries...
PREPARATION FRONT PANEL INFORMATION Image shown may differ from your TV. 19/22LD350 MENU Button ENTER Button INPUT Button VOLUME CHANNEL ( Buttons (-, +) Buttons POWER Button INPUT MENU ENTER 26/32LD350 CHANNEL ( Buttons VOLUME (+, -) Buttons ENTER Button ENTER MENU Button MENU...
Page 11
Image shown may differ from your TV. 32/37/42/47LD450 CHANNEL ( Buttons VOLUME (+, -) Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button SPEAKER POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
PREPARATION BACK PANEL INFORMATION Image shown may differ from your TV. AC-IN 19/22LD350 /DVI IN RS-232C IN (CONTROL&SERVICE) OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT VIDEO AUDIO R L(MONO) RGB IN (PC) ANTENNA/ VIDEO AUDIO CABLE IN COMPONENT IN 26LD350 RS-232C IN (CONTROL&SERVICE) OPTICAL...
Page 13
Image shown may differ from your TV. AC IN 32LD350 RS-232C IN (CONTROL&SERVICE) OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT VIDEO AUDIO R L(MONO) RGB IN (PC) ANTENNA VIDEO AUDIO /CABLE IN COMPONENT IN AV IN 2...
Page 14
PREPARATION Image shown may differ from your TV. 32/37/42/47LD450 RS-232C IN OPTICAL (CONTROL&SERVICE) DIGITAL AUDIO OUT AV IN 1 RGB IN (PC) VIDEO AUDIO L(MONO) ANTENNA AUDIO IN /DVI IN VIDEO AUDIO (RGB/DVI) /CABLE IN COMPONENT IN AV IN 2...
Page 15
HDMI/DVI IN, HDMI IN ANTENNA/CABLE IN Digital Connection. Connect over-the air signals to this jack. Supports HD video and Digital audio. Doesn’t Connect cable signals to this jack. support 480i. COMPONENT IN Accepts DVI video using an adapter or HDMI to Analog Connection.
PREPARATION STAND INSTRUCTIONS (For 19/22LD350) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown until you hear it click.
Page 17
DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER Insert the P P R R O O T T E E C C T T I I O O N N C C O O V V E E R R into the TV. P P R R O O T T E E C C T T I I O O N N C C O O V V E E R R Fix the 4 bolts securely using the holes in the back of the TV.
Page 18
PREPARATION STAND INSTRUCTIONS (For 26/32LD350) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S S T T A A N N D D B B O O D D Y Y with C C O O V V E E R R B B A A S S E E of the TV by using the 4 S S T T A A N N D D B B O O D D Y Y screws supplied.
Page 19
DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included p p r r o o t t e e c c t t i i o o n n c c o o v v e e r r over the hole for the stand. Press the P P R R O O T T E E C C T T I I O O N N C C O O V V E E R R into the TV until you hear it click.
Page 20
PREPARATION STAND INSTRUCTIONS (For 32/37/42/47LD450) INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. NOTE When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully,...
Page 21
DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included p p r r o o t t e e c c t t i i o o n n c c o o v v e e r r over the hole for the stand.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
CABLE MANAGEMENT Image shown may differ from your TV. For 19/22LD350 After connecting the cables as necessary, install CABLE HOLDER as shown and bundle AC-IN the cables.
Page 24
PREPARATION AC IN CABLE MANAGEMENT Image shown may differ from your TV. AC IN For 26/32LD350, 32/37/42/47LD450 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. AC IN Open the CABLE MANAGEMENT CLIP as AC IN shown.
SWIVEL STAND (Except 19/22LD350) After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. POSITIONING YOUR DISPLAY (For 19/22LD350) Here shown may be somewhat different from your TV. Adjust the position of the panel in various ways for maximum comfort.
PREPARATION DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations. CAUTION Do not mount near or above any type of heat source.
ATTACHING THE TV TO A DESK (Except 19/22LD350) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand 1-Screw (provided as parts of the product) Desk WARNING To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation...
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 3 3 2 2 L L D D 3 3 5 5 0 0 . HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
HDMI Connection 1. How to connect Connect the digital set-top box to the H H D D M M I I / / D D V V I I I I N N or H H D D M M I I / / D D V V I I I I N N 1 1 / / 2 2 * jack on the TV. RS-232C IN (CONTROL&SERV No separate audio connection is necessary.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect Connect the DVI output of the digital set-top box to the H H D D M M I I / / D D V V I I I I N N or H H D D M M I I / / D D V V I I I I N N 1 1 jack on the RS-232C IN (CONTROL&SERVICE) OPTICAL...
DVD SETUP Component Connection 1. How to connect Connect the video outputs ( Y, P ) of the DVD to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O jacks on the TV. Match the jack colors ( Y = green, P = red ) .
Page 34
EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect RS-232C IN (CONTROL&SERVICE) Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and OPTICAL AUDIO IN DIGITAL DVD.
VCR SETUP Antenna Connection 1. How to connect Connect the RF antenna out socket of the UDIO R VCR to the A A N N T T E E N N N N A A / / C C A A B B L L E E I I N N sock- et on the TV.
Page 36
EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left RS-232C IN (CONTROL&SERVICE) = white, and Audio Right = red).
OTHER A/V SOURCE SETUP Camcorder 1. How to connect Video Game Set Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and external equipment. Match the jack colors.
EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect Connect the VGA output of the PC to the R R G G B B I I N N RS-232C I (CONTROL&SER ( ( P P C C ) ) jack on the TV.
Page 40
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect Connect the DVI output of the PC to the H H D D M M I I / / D D V V I I I I N N or H H D D M M I I / / D D V V I I I I N N 1 1 jack on the TV. RS-232C IN (CONTROL&SERVICE) OPTICAL...
Page 41
NOTES To get the the best picture quality, adjust the PC The synchronization input form for Horizontal and graphics card to 1360x768. Vertical frequencies is separate. Depending on the graphics card, DOS mode may Depending on the graphics card, some resolution not work if a HDMI to DVI Cable is in use.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P P o o s s i i t t i i o o n n , P P h h a a s s e e , and S S i i z z e e can also be adjusted. You can use this function only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
Page 43
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. SCREEN PICTURE Move Prev. Move Enter Resolution •...
Page 44
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. SCREEN PICTURE Move Prev.
Page 45
Screen Reset (Reset to original factory values) Returns P P o o s s i i t t i i o o n n , S S i i z z e e , and P P h h a a s s e e to the default factory settings. This feature operates only in RGB-PC mode.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns the TV on from standby or off to standby. ENERGY AV MODE INPUT ENERGY SAVING Adjusts the Energy Saving.
NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. LIST Displays the channel table. p p . . 5 5 6 6 FLASHBK Tunes to the last channel viewed. MENU Displays the main menu or clears all on-screen displays and return to TV viewing.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the I I N N P P U U T T C C H H ( ( button on the TV or press D D E E...
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when pur- chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti- vated from the user menus.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 19/22/26LD350 CHANNEL PICTURE AUDIO Move Enter Move Enter Move Enter Auto Tuning Aspect Ratio : 16:9 Auto Volume : On Manual Tuning Picture Wizard...
32LD350, 32/37/42/47LD450 CHANNEL PICTURE AUDIO Move Enter Move Enter Move Enter Auto Tuning Aspect Ratio : 16:9 Auto Volume : On Manual Tuning Picture Wizard Clear Voice II : On Channel Edit Energy Saving : Off • Level Picture Mode : Standard Balance •...
WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. A A s s p p e e c c t t R R a a t t i i o o : Selects your desired picture format. P P i i c c t t u u r r e e M M o o d d e e : Selects the factory preset picture depend on the viewing environment.
CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours.
Page 54
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qual- ity of the signal being received. CHANNEL CHANNEL Move Enter Move Enter Auto Tuning Auto Tuning Manual Tuning...
Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using C C H H button during TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. Channel List This padlock is displayed when the channel is locked with parental control. Exit Displaying Channel List Display the C C h h a a n n n n e e l l L L i i s s t t .
FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the F F A A V V (Favorite) button repeatedly.
WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL LIST Displaying the favorite channel list Favorite List MARK Display the Favorite channel list. Selecting a channel in the favorite channel list Select a channel. Exit Switch to the chosen channel number. ENTER Paging through a favorite channel list Turn the pages.
BRIEF INFORMATION Brief Info shows the present screen information. Show the Brief Info on the screen. INFO Return to TV viewing. BACK Brief Info Title Test.. 10:40 AM DOLBY DIGITAL Sat, Feb 21, 2009 10:10 AM 11:40 AM Multilingual Caption 1080i TV-PG D L S V Program title...
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. INPUT ENTER 32LD350: You can also select the desired input source in the I I N N P P U U T T menu. 19/22LD350: Component HDMI...
INPUT LABEL This indicates which device is connected to which input port. OPTION Move Enter Menu Language : English Audio Language : English Input Label Component SIMPLINK : On Component RGB-PC Key Lock : Off RGB-PC HDMI1 Simple Manual HDMI HDMI2 Caption : Off...
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. Cinema If you select “C C i i n n e e m m a a ” in AV mode, C C i i n n e e m m a a will be selected both for “PIC- TURE menu - Picture Mode”...
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION OPTION Move...
Page 64
WATCHING TV / CHANNEL CONTROL SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus.
Page 65
SIMPLINK Functions D D i i r r e e c c t t P P l l a a y y : : After connecting AV devices to the TV, you can directly control the devices and play media with- out additional settings.
(For 32LD350, 32/37/42/47LD450) ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder. Connect the USB device to the U U S S B B I I N N jacks on the side of TV.
PHOTO LIST You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: * .JPG You can play JPG files only. Only baseline scan is supported among JPG. Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640 Screen Components Select P P h h o o t t o o L L i i s s t t .
Page 68
Photo Selection and Popup Menu Photo List Page 2/3 No Marked Drive1 Up Folder KY103 03/30/2008 JMJ001 KY101 KY104 06/10/2008 06/19/2008 KY102 KY105 04/03/2008 01/31/2008 JMJ001 JMJ005 01/01/2000 05/13/2008 JMJ002 JMJ006 06/15/2008 05/26/2008 1366 768, 125KB JMJ003 JMJ007 04/03/2008 02/18/2008 Up Folder JMJ004 JMJ008...
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. Photo List Page 2/3 No Marked Drive1 Up Folder KY103 03/30/2008 JMJ001 KY101 KY104 06/10/2008 06/19/2008 KY102 KY105 04/03/2008...
Page 70
Select the S S l l i i d d e e s s h h o o w w , B B G G M M , ( ( R R o o t t a a t t e e ) ) , ENTER D D e e l l e e t t e e , O O p p t t i i o o n n , or H H i i d d e e .
MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Supported music file: * .MP3 Bit rate range 32 Kbps - 320 Kbps •...
Page 72
Music Selection and Popup Menu P P l l a a y y (During stop): Play the selected music. Once a song finishes playing, the next selected Music List No Marked Page 2/3 one will be played. When there are no selected Drive1 Title Duration...
Page 73
The play information box (as shown below) will automatically move across the screen when there is no user input to pre- vent a fixed image remaining on the screen for a extended period of time. NOTE When music is playing, is displayed in front of the music play time.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. HDMI/RGB-PC input source use 4:3 or 16:9 aspect ratio. But you can select all aspect ratios in HDMI-PC 1920X1080 input.
Page 75
16:9 Adjust the picture horizontally, in a linear pro- Choose 4:3 when you want to view a picture portion to fill the entire screen. with an original 4:3 aspect ratio. Just Scan Zoom Normally the edges of video signals are cropped Choose Zoom when you want to view the picture 1-2%.
PICTURE CONTROL PICTURE WIZARD White Level This feature lets you adjust the picture quality of the original image. Set the screen above identical to the Recommended sample below. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step.
Page 77
Vertical Sharpness Backlight Set the screen above identical to the Recommended sample Set the Backlight to your Brightness preference. below. Recommended High Dark Recommended Bright • V Sharpness • Backlight Previous Next Previous Next Adjust V V e e r r t t i i c c a a l l ENTER S S h h a a r r p p n n e e s s s s .
PICTURE CONTROL PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. PICTURE PICTURE Move Enter Move Enter Aspect Ratio : 16:9 Aspect Ratio : 16:9 Picture Wizard Picture Wizard Energy Saving : Off...
MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off • Backlight Picture Mode : Standard • Backlight Enter • Contrast •...
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the P P i i c c t t u u r r e e R R e e s s e e t t function for each P P i i c c t t u u r r e e M M o o d d e e .
EXPERT PICTURE CONTROL By segmenting categories, E E x x p p e e r r t t 1 1 and E E x x p p e e r r t t 2 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
Page 82
PICTURE CONTROL Color Temperature Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. (Advanced Control) Adjusts the contrast to keep it at the best level according to the brightness of the Dynamic Contrast screen.
Page 83
Standard: Displays standard set of colors. Wide: Increase number of colors used. Color Gamut Maximize the utilization of color to increase color quality. Show clearer and distinctive yet natural edges in of the video. Edge Enhancer This function is enabled in "P P i i c c t t u u r r e e M M o o d d e e - C C i i n n e e m m a a , E E x x p p e e r r t t ". Convert the color of a different video to HD color.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption by lowering the backlight level. The default factory setting complies with the E E n n e e r r g g y y S S t t a a r r requirements and is adjusted to the comfortable level to be viewed at home.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE PICTURE Move Enter Move Enter • Contrast • Contrast • Brightness • Brightness All picture settings will be resetted. • Sharpness • Sharpness Continue? • Color •...
PICTURE CONTROL POWER INDICATOR - Except 19/22LD350 Adjust the power/standby indicator light of TV front. OPTION OPTION Move Enter Move Enter SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption : Off...
DEMO MODE Displays a slide show to explain the various feature of this TV. OPTION OPTION Move Enter Move Enter SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Simple Manual Simple Manual Caption : Off Caption : Off Set ID...
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : On •...
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume...
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO AUDIO Move Move Enter Enter Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off •...
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice II : Off Clear Voice II : Off •...
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. In A A V V , C C o o m m p p o o n n e e n n t t , R R G G B B and H H D D M M I I with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Enter Move Enter • Level • Level Balance Balance Sound Mode : Standard Sound Mode : Standard • Infinite Sound :Off •...
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom- panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Multi Audio English Analog TV...
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION OPTION Move Enter Move Enter Menu Language : English Menu Language : English Audio Language : English...
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION OPTION Move Enter Move Enter Menu Language : English Menu Language : English English Audio Language : English Audio Language : English Español Input Label Input Label Français...
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap- tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION OPTION Move...
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. Custom OPTION OPTION Move Enter Move Enter Size A Standard Menu Language : English Menu Language : English Font...
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME TIME Move...
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the C C l l o o c c k k function. TIME TIME Move...
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O O f f f f T T i i m m e e function overrides the O O n n T T i i m m e e function if they are both set to the same time. The TV must be in standby mode for the O O n n T T i i m m e e to work.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME TIME Move Enter Move Enter Clock Clock Off Time : Off Off Time : Off On Time...
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad- casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories.
PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children...
Set Password Change the password by inputting a new password twice. LOCK LOCK Move Move Enter Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel Confirm Movie Rating Movie Rating TV Rating-Children TV Rating-Children Close TV Rating-General...
PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block...
MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
Page 110
PARENTAL CONTROL / RATINGS TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi- ences in the TV Rating - sub menu, your children can view those programs.
Page 111
TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel...
Page 112
PARENTAL CONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system. Blocking off : Permits all programs LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English...
Page 113
TV Rating French - For CANADA Selecting Canadian French rating system. LOCK LOCK Blocking off : Permits all programs Move Move Enter Enter Lock System : Off Lock System : Off Set Password Set Password 8ans+ Block Channel Block Channel 13ans+ TV Rating-English TV Rating-English...
PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Humor Set Password Set Password Sport...
EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Component Downloadable Rating Component RGB-PC Input Block RGB-PC HDMI1 HDMI HDMI2 Close Close 26/32LD350 19/22LD350 Select L L O O C C K K .
APPENDIX TROUBLESHOOTING T T h h e e o o p p e e r r a a t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k n n o o r r m m a a l l l l y y . . Check to see if there is any object between the product and the remote control causing obstruction.
Page 117
T T h h e e a a u u d d i i o o d d o o e e s s n n o o t t w w o o r r k k . . Press the VOL or VOLUME button.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while.
PRODUCT SPECIFICATIONS 19LD350 22LD350 MODELS (19LD350-UA/UB) (22LD350-UA/UB) 18.2 x 13.8 x 6.7 inches 21.0 x 15.6 x 6.7 inches With stand Dimensions 462.4 x 353.0 x 171.0 mm 533.4 x 397 .0 x 171.0 mm (Width x Height x Depth) 18.2 x 12.1 x 2.5 inches...
Page 120
APPENDIX 42LD420 (42LD420-UA) 37LD450 MODELS 42LD450 (42LD450-UA) (37LD450-UA) 42LD520 (42LD520-UA) 37 .0 x 26.1 x 1 1.6 inches 41.4 x 28.3 x 1 1.6 inches With stand Dimensions 940.8 x 665.2 x 296.2 mm 1052.2 x 719.1 x 296.2 mm (Width x Height x Depth) Without stand...
IR CODES Code Code Function Note Function Note (Hexa) (Hexa) POWER Remote control Button (Power On/Off) Discrete IR Code Q.MENU Remote control Button (TV Input Selection) MENU Remote control Button POWER ON Discrete IR Code INPUT Remote control Button (Only Power On) 10-19 Number Key 0-9 Remote control Button...
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
Page 123
RS-232C Configurations Either cable below can be used. 7-Wire Configuration 3-Wire Configurations ( Serial female-female NULL modem cable ) ( Not standard ) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’.
APPENDIX Command Reference List DATA DATA C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 (Hexadecimal) (Hexadecimal) 01.
Page 125
0 0 1 1 . . P P o o w w e e r r ( ( C C o o m m m m a a n n d d : : k k a a ) ) You can also adjust mute using the MUTE button on remote control.
Page 126
APPENDIX 1 1 1 1 . . S S h h a a r r p p n n e e s s s s ( ( C C o o m m m m a a n n d d : : k k k k ) ) *Refer to ‘Real data mapping’...
Page 127
Data5: Main/Sub Two/One Using Physical Step Part Channel Picture Channel Reserved Main NTSC Air No Use NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved The table above lists the binary code which must be converted to Hexadecimal before sending.
APPENDIX OPEN SOURCE LICENSE - This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 the program proprietary. To prevent this, we have made it clear Franklin Street, Fifth Floor, Boston, MA 021 10-1301 USA that any patent must be licensed for everyone's free use or not licensed at all.
Page 129
b) You must cause any work that you distribute or publish, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alter- that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at native is allowed only for noncommercial distribution and no charge to all third parties under the terms of this...
Page 130
APPENDIX 7 . If, as a consequence of a court judgment or allegation of any later version published by the Free Software Foundation. If the program does not specify a version number of this patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by license, you may choose any version ever published by the court order, agreement or otherwise) that contradict the con-...
Page 131
END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If the program is interactive, make it output a short notice like If you develop a new program, and you want it to be of the great- this when it starts in an interactive mode: est possible use to the public, the best way to achieve this is to Gnomovision version 69, Copyright (C) year name of author...
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 To protect each distributor, we want to make it very clear that Franklin Street, Fifth Floor, Boston, MA 021 10-1301 there is no warranty for the free library. Also, if the library is mod- Everyone is permitted to copy and distribute verbatim copies of ified by someone else and passed on, the recipients should know this license document, but changing it is not allowed.
Page 133
Although the Lesser General Public License is Less protective of each copy an appropriate copyright notice and disclaimer of the users' freedom, it does ensure that the user of a program that warranty; keep intact all the notices that refer to this license is linked with the Library has the freedom and the wherewithal to and to the absence of any warranty;...
Page 134
APPENDIX 3. You may opt to apply the terms of the ordinary GNU General the object file is unrestricted, regardless of whether it is legal- ly a derivative work. (Executable containing this object code Public License instead of this License to a given copy of the Library.
Page 135
For an executable, the required form of the "work that uses of the rights granted herein. You are not responsible for enforcing compliance by third the library" must include any data and utility programs need- ed for reproducing the executable from it. However, as a spe- parties with this license.
Page 136
APPENDIX If the library does not specify a license version number, you To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most may choose any version ever published by the Free Software Foundation.
Page 137
MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1.Definitions. code which is described in the source code notice required by exhibit as original code, and which, at the time 1.0.1. “Commercial use” means distribution or otherwise making of its release under this license is not already covered the covered code available to a third party.
Page 138
APPENDIX (c) the licenses granted in this section 2.1(a) and (b) are You may not offer or impose any terms on any source code version that alters or restricts the applicable version of effective on the date Initial developer first distributes original code under the terms of this license.
Page 139
(c) Representations. 3.7. Larger works. You may create a larger work by combining covered code contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's with other code not governed by the terms of this license modifications are contributor's original creation(s) and distribute the larger work as a single product.
Page 140
APPENDIX 7 . DISCLAIMER OF WARRANTY. such participant under sections 2.1(b) and 2.2(b) are revoked effective as of the date you first made, used, COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY sold, distributed, or had made, modifications made by KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, that participant.
Page 141
1 1. MISCELLANEOUS. EXHIBIT A -Mozilla Public License. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is The contents of this file are subject to the Mozilla Public License held to be unenforceable, such provision shall be reformed Version 1.1 (the “license”);...