Page 1
Lifds Good LCD TV OWNER'S MANUAL 19LD350 32LD450 42LD520 22LD350 37LD450 47LD520 26LD350 42LD450 55LD520 32LD350 47LD450 32LD320 42LD420 47LD420 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one Record it bel,...
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience Keep these instructions. receptacles, and the point where they exit from Heed all warnings. the apparatus. Follow all instructions. Do not use this apparatus near water.
Page 4
SAFETYINSTRUCTIONS WARNING - To reduce the risk of fire or electrical Never touch this apparatus or antenna during a thunder or lighting storm. shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands.
Page 5
ANTENNAS Ventilation Outdoor antenna grounding Install your TV where there is proper ventila- tion. Do not install in a confined space such as If an outdoor antenna is installed, follow a bookcase. Do not cover the product with precautions below. An outdoor antenna system cloth or other...
Multimedia Interface are trademarks or registered will then be accessible by the user to experience the trademarks of HDMI Licensing LLC." best their LG HDTV has to offer. CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode.
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact dealer where you purchased the TV. The accessories included may differ from the images below. "0 CD Manual Remote Control, Owner's Manual Power Cord Batteries...
Page 11
""_ Image shown may differ from your TV. 32/37/42/47LD450 CHANNEL ( ^, v) Buttons VOLUME (+,-) Buttons Button Button Button SPEAKER POWER Button Remote Control Sensor )ower/Standby Indicator llluminates red in standby mode. llluminates blue when the TV is switched on.
Page 17
DETACHMENT Carefully place the TV screen side down on a "0 cushioned surface to protect the screen from damage. Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER Insert the PROTECTION COVER into the TV. _ _ii_ ¸...
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. r'rl LG recommends...
ATTACHING THE TV TO A DESK (Except 19/22LD3S0) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 1-Screw (provided as parts of the product) Desk KENSINGTONSECURITYSYSTEM ,,,I T his feature is not available for all models.
PREPARATION SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). ,,,iImage shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
,,,I T o prevent damage do not connect to the power outlet until all connections are made between the devices. ""_ Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
EXTERNAL EQUIPMENT SETUP ,,,_ T o prevent the equipment damage, never plug in any power cords until you havefinished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 32LD350. HD RECEIVERSETUP This TV can receive digital over-the-air/digital cable signals without an external...
Page 31
HDMI Connection 1. How to connect Connect the digital set-top box to the HDMI/DVI IN or HDMI/DVl IN 1/2" jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use ,l_Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) ,l_Select the HDMI or HDMI1/2 _ input source on the TV using the INPUT button on the remote control.
Page 32
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect Connect the DVI output of the digital set-top box to the HDMI/DVl IN or HDMI/DVl 1 jack on the Connect the digital set-top box audio output to the AUDIO IN (RGB/DVl) jack on the TV.
DVD SETUP Component Connection 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the...
Page 34
EXTERNALEQUIPMENT SETUP Connection Composite (RCA) 1. How to connect Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. How to use ,l_Turn on the DVD player, insert a DVD. ,l_Select the AV orAV 1/2 _ input source on the TV using the INPUT...
VCR SETUP Antenna Connection 1. How to connect Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock- et on the TV. "O Connect antenna cable to the antenna in socket of the VCR. Wall Jack "O 2.
Page 36
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). _> "O 2. How to use 01_ Insert a video tape into the VCR and press PLAY on the VCR.
OTHERA/V SOURCESETUP Camcorder 1. How to connect Video Game Set Connect AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use 01_ S elect the AV2 _ input source on the TV using "O the INPUT button...
EXTERNALEQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV's audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1 -channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection I"1'1 1. How to connect I"1'1 onnect the VGA output of the PC to the RGB (PC) jack on the TV.
Page 40
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect Connect the DVI output of the PC to the HDMI/DVI IN or HDMI/DVI IN 1 jack on the TV. Connect PC audio output to the AUDIO (RGB/DVl) jack on the TV. "0 2.
Page 42
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. You can use this function only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
Page 43
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Select PICTURE. 01_ I f the position of the image is still not Select Screen (RGB-PC).
Page 44
EXTERNALEQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. Select PICTURE. _ Position: This function is to adjust pic- ture to left/right...
Page 45
Screen Reset (Reset to original factory values) Returns Position, Size, and Phase to the default factory settings. This feature operates only in RGB-PC mode. iiiiiiiiiii[i[i[i!iii_i_iWii_iii _iiIi[i_ii[i[i_ii!!!iiiiiiIiii_i_iiiii!i!iiiIIii_iii[i[i[iiiIi_iIiii!ii[_i[i_i[_i[i[i!_i_ii[i_iiiiiii[iiiiiiiiiii_i[[i_iiii_iii[_Ii[i_i[[i!i!_i!!i_iii_iii!!Ii _iiiii_iiii[ii/iiiii![i[i///iiii[i[iiiiiiiiiii[i[ii _ii_i_iiiiiii_i_!i!i!iii!i_!i_ii!iiii_iii!i!iiii_!iii!i_i!ii!i!i!i_i!_ii!_ii!!!ii_i_!i_Iiii_i!i!_ii Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns the TV on from standby or off to standby. ENERGY AVMODEINPUT ENERGYSAVING Adjusts the Energy Saving. _ p.84 SAVING AV MODE Toggles through...
Page 47
NUMBER button (DASH) Used to enter a program number for multiple program channels such as 2-I, 2-2, etc. LIST Displays the channel table. _ p.56 FLASHBK Tunes to the last channel viewed. -r" MENU Displays the main menu or clears all on-screen displays and return to TV viewing.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly. At this moment, the TV switches to standby mode. 01_ In standby mode to turn TV on, press the (b/I , INPUT, or ^ v ) button on the TV or press the POWER, INPUT,...
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when pur- chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti- vated from the user menus.
WATCHING TV / CHANNEL CONTROL ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 19/22/26LD350 < > For USA For Canada Display each menu. Select a menu item. Accept the current selection. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture format. Picture Mode: Selects the factory...
CHANNELSETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected...
Page 54
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qual- ity of the signal being received. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii -r" iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii < >...
Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH ^ v button during TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. This padlock is displayed when the channel is locked with parental control. < Displaying Channel List > Display the Channel List.
FAVORITECHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the FAV (Favorite) button repeatedly. -r"...
WATCHING TV / CHANNEL CONTROL FAVORITECHANNEL LIST Displaying the favorite channel list Display the Favorite channel list. Selectinga channelin the favorite channellist Select a channel. "-r" Switch to the chosen channel number. < Paging through a favorite channel list > Turn the pages.
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. _ 32LD350: You can also select the desired input source in the INPUT menu. Select the desired input source. ,NPUT 19,22,o 0:[ TV].1 Av ].[Component -r"...
INPUT LABEL This indicates which device is connected to which input port. -r" iiiiiiiiiiiiiiiiiiiiiiiiiii !iilil ¸i ¸ i¸ il¸ !iiil ¸i]!i !!!!!!i_!: i) i i!iiiil iiiiiiiiiiil i¸ili ¸ i ¸ i ¸ ii ¸i ¸ i¸ i¸i!ii ¸iiii!!(i!! 26/32LD350 19/22LD350 <...
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. i i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii _i_i_i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i!!_i6!!_!i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!i!!i!!_!!i!!i!i!i!i!i!i!i!i! ,_,If you select "Cinema" in AV mode, Cinema will be selected both for "PIC- TURE menu - Picture Mode" and "AUDIO menu - Sound Mode"...
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
WATCHING TV / CHANNEL CONTROL €_ImPLInK SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with _)mp-,nK logo are fully supported. SIMPLINK can be turned on and off in the user menus.
Page 65
SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media with- out additional settings. _Select AV device: Enables you to select one of the AV devices connected to TV. Disc playback: Control connected AV devices by pressing the ^ v <...
(For 33LD350, 33/37/42/47LD450) ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder.
PHOTOLIST You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG You can play JPG files only. Only baseline scan is supported amongJPG. Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640 Screen Components Select Photo...
Page 68
Photo Selection and Popup Menu ct% Exit ._Navigation Popup Menu Page Change Mark When you select a file (not folder), this PopUp menu is displayed. _, Vie_. Display the selected item. _, Mark All: Mark all photos on the screen. _, Unmark All: Deselect all marked photos.
Page 69
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. _:_Navigation _;PopupMenu PageChange Mark (_% Exit _2Navigation _PopupMenu PageChange Mark o_a Exit The aspect ratio of a photo may change the size of the photo displayed...
Page 70
Select the Slideshow, BGM, (Rotate), Delete, Option, or Hide. m Use A v < > button to select and control the menu on the full_sized screenl _ Slideshow: Selected photos are displayed during slide show. If no photo is selected, all photos in the cur- rent folder are displayed during slide show.
MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Supported music file: *.MP3 Bit rate range 32 Kbps - 320 Kbps •...
Page 72
Music Selection and Popup Menu _, Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current fold- er will be played.
Page 73
The play information box (as shown below) will automatically move across the screen when there is no user input to pre- vent a fixed image remaining on the screen for a extended period of time. o_NOTE ,_When music is playing, _ is displayed in front of the music play time.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your HDMI/RGB-PC input source use 4:3 or 16:9 aspect ratio. But you can select all aspect ratios in HDMI-PC 1920X1080 input.
Page 75
16:9 Adjust the picture horizontally, in a linear pro- Choose 4:3 when you want to view a picture portion to fill the entire screen. with an original 4:3 aspect ratio. Zoom Just Scan Normally the edges of video signals are cropped Choose Zoom when you want to view the picture 1-27o.
PICTURECONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate screen quality by easily following each step. When adjust image...
Page 77
Adjust Vertical Adjust Backlight. Sharpness. "O Adjust Color Temperature. Select input source to apply the settings. Save. Adjust Dynamic Contrast. Finish the Picture Wizard. 01_ I f you stop the setting before the final step, the changes will not be saved to the TV.
PICTURECONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input...
EXPERTPICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in.
Page 82
PICTURECONTROL ,_,Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. i,i,i A djusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. i,i,i A djusts screen colors so that...
Page 83
Standard: Displays standard set of colors. Wide: Increase number of colors used. Maximize the utilization of color to increase color quality. Show clearer and distinctive yet natural edges in of the video. This function is enabled in "Picture Mode - Cinema, Expert".
PICTURECONTROL ENERGYSAVING It reduces the TV's power consumption by lowering the backlight level. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.
PICTURERESET Settings of the selected picture modes return to the default factory settings. "O Select PICTURE. Select Picture Reset. Select Yes. Initialize the adjusted value. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. iiMii!!iiiiii_iiii_iiii_iii_I_iii!iiiiii_iiiiiIii!iiiiiii_i_iiiiiiiiiii_!jii?iiii_iiiiii!_iIi!i_iIii_Ii_i;iiiiiiii!_iiii!!_ii_i_iii_i_M_ii!ii_i_i_iiiiiiii_ii_ii_i!i_!ii!_i_:i_i_i_i_i_iiiiiiiiIiiiiii_i_iiii!!iiiiiiiii_iiii_ i_!!_!!!!!!!!!!i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!_!!!!!!!!!!!!!!!!!!!!!!_!!!_!!!!!i!!!!_!!!!!!_!_ Select AUDIO. Select Clear Voice Select 0 n or Off. Adjustment for Clear Voice Level With selecting O n l'rl Select Level.
SOUND & LANGUAGE CONTROL PRESETSOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. Select AUDIO. 01_ Standard, Music, Cinema, Sport, Game preset optimum...
SOUND SETTING ADJUSTMENT- USER MODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate adjustments. Select Sound Mode. Return to the previous menu. Select Standard, Music, Return to TV viewing. Cinema, Sport, or Game. Select Treble or Bass.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. _i_iiiiii_ii_iiiii_:_iiiiiiii_iiiiiiiYiiiiii!!iii_Yi_i_i_i_i_iiiiiiiiiIii_iiiiii!!i_iiiii_iiiiii_iiiiii_ii!!iiiiiii_ii_!_!iiiiii_iiii!iIiii_i_iii_i!!i!ii_i_iiii_i!_1_iiIi_i_iiii!!!_:_:_iiii_i_iii_i_iii!!_iiiiiiiiii_iiiii_i_Ii i_i_iiiiY!:_iiii!!_ii!iiii!iii!i!i_i!ii!ii!iiii!iiiii!_iiiiii!_iiiiii!iii!i!i_iiiiiii!iiiii!iii!i!iii_!!!_!iii_ii_i :i_iiii_ili_iiiiiHi!iiiiii Select AUDIO. Select Balance. Make appropriate adjustments. l'rl Return to the previous menu. Return to TV viewing.
TV SPEAKERSONIOFF SETUP Turn the TV speakers off if using external audio equipment. In AV, Component, RGB and HDMI with HDMI to DVl cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn offthe TV's internal speakers.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. Select AUDIO. Select Reset. l'rl Initialize the adjusted value. Return to TV viewing.
STEREO/SAP BROADCASTSETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom- panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. Select OPTION. Select Audio Language. Select your desired language. l'rl Return to the previous menu. Return to TV viewing.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. Select OPTION. Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. l'rl Return to the previous menu.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap- tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. i_iii[[[i/iiiiiiiii[[[i/[/[ili!JiJiiii[[iiMiiiiil ¸_i_iiiIi_ii1i!_i[[[[[[iii_iiIii[_i_ji[[[[[[iii_i;_ii[[i!_i_iii[iiiiii[[[[i_iiii_i_!_iii[I[[Ii_i[I[i[i_i_iiiiiiiiii_!i!ii[[i[[[Ii_ Select OPTION.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. Select OPTION. 01_ Size: Set the word size. 01_ F ont: Select a typeface for the text.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock function. Select TIME. Select Clock.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work.
TIME SETTING SLEEPTIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii Select TIME. H To cancel the Sleep Timer, select Off. Select Sleep Timer.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad- casting station. The default setting is to allow all programs to be viewed.
PARENTALCONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. iiii[i_iiii!!!iiiiii!!i_gi_iiiiii!i_iiiiiiIiiHi_iiiiii[i_iiiiiiiIi_Hiiiiiii!iiiiii_ii!iii_iiiii[i[i_;i;Jiiiiiiiiiiiiii_i_i!iiiiiiiii_iiii_iiii_ii :,:iii!!iiiii/iiiiiiiiiiiiiii:il Ch. Change Navigation CH Page Change Previous Block/Unblock Select LOCK. ,i,_ If a channel is locked, enter the pass- word to unlocked it temporarily.
MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level.
Page 110
PARENTALCONTROL / RATINGS TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi- ences in the TV Rating - sub menu, your children...
Page 111
TV Rating General- ForUSA Based on the ratings, blocks certain TV programs that you and your family do not want to view. Select LOCK. ,i_Age (applies to TV-G,TV-PG,TV-14,TV- MA). ,l_Dialogue-sexual dialogue (applies to Input the password. TV-PG,TV- 14). ,l_Language-adult language (applies to TV-PG, TV-14, TV-MA).
Page 112
PARENTALCONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system. Select LOCK. 0fu_ IfTV Rating-English or TV Rating- Input the password. French is locked, enter the password to unlocked it temporarily. 01_ E (Exempt) Select TV Rating-English. 01_ C (Children) 01_ C 8-1- (Children eight years and older)
Page 113
TV Rating French - For CANADA Selecting Canadian French rating system. 0,_ E (Exempt) Select LOCK. __4,, 0,_ G (General) 01_ 8 ans+ (General-Not convenient for lit- Input the password. tle children) 01_ 1 3ans+ (Not convenient for children 13; years and younger) Select TV Rating-French.
PARENTALCONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data. 01_ B ased on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Select LOCK.
APPENDIX TROUBLESHOOTING Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. IMM Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Page 117
Press the VOL or VOLUME button. i,i,i S ound muted? Press MUTE button. mini Try another channel. The problem may be with the broadcast. i,i,i Are the audio cables installed properly? i,i,i Adjust Balance in menu option. i,i,i A change in ambient humidity or temperature may result in an unusual noise when the product...
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here's a great way to keep the dust offyour...
PRODUCT SPECIFICATIONS 18.2 x 13.8 x 6.7 inches 21.0 x 15.6 x 6.7 inches 462.4 x 353.0 x 171.0 mm 533.4 x 39Z0 x 171.0 mm 18.2 x 12.1 x 2.5 inches 21.0 x 13.8 x 2.5 inches 462.4 x 308.0 x 65.0 mm 533.4 x 351.4 x 65.0 8.3 Ibs / 3.8 kg...
Page 120
3Z0 x 26.1 x 11.6 inches 41.4 x 28.3 x 11.6 inches 940.8 x 665.2 x 296.2 mm 1052.2 x 719.1 x 296.2 3Z0 x 23.7 x 3.5 inches 41.5 x 25.8 x 3.5 inches 940.8 x 603.5 x 90.6 mm 1052.2 x 65Z3 x 90.8 mm 35.9...
IR CODES POWER Remote control Button (Power On/Off t Discrete IR Code ..Q.MENU Remote Control Button (TV Input Selection) MENU Remote control Button POWER ON Discrete IR Code INPUT Remote €ontrol Button (Only Power On) Number Key 0-9 Remote control Button POWER OFF Discrete IR Code ..
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV's functions externally. 01_ Note: RS-232C on this unit is intended to be used with third party RS-232C control...
Page 123
RS-232C Configurations Either cable below can be used. D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping'. !_i_iii_ii_iiiiii!iiiiiiii_!iiiii_i_!_!_!iiiii_iiiiii!iiii_1iiiiiiiiiii!_iiiiii_iIi!_iii_!i!i_i!iiii_ii!_iii_:_:_i_iiiii_ii_ii_iii_M_ii_ Select OPTION. 0101_ Real data mapping 0 : Step 0 Select Set ID. A : Step 10 (SET ID 10) Choose the desired TV ID number.
Page 125
Power (Command: k a) You can also adjust mute using the MUTE button on remote control. To control Power On/Off of the TV. Transmission [k] [el[ ][Set ID][ ][Data] [Cr] Transmission[k] [a][] [Set!D][ ] [Data] [Cr] Data 00: Volume mute on (Volume off) Data 00: Power Off Data 01 :Power On Data 01: Volume mute off (Volume on)
Page 126
*Refer to 'Real data mapping'. Sharpness (Command: k k) To adjust screen sharpness. Acknowledgement[t][ ][set ID][ ][OK/NG] [Data] [x] You can also adjust sharpness in the PICTURE menu. TransmisSion [k] [k][] [set ID][] [Data] [Cr] 1 7. Color Temperature (Command: k u) To adjust color temperature.
Page 127
Data 5: The table a bove l ists t hebinary code w hich m ust be converted toHexadecimal before sending. For e xample: 21. Channel Add/Del (Command: m b) The binary code t otune the sub source toanNTSC To add and delete the channels. cable c hannel is"1000 0001 "...
OPEN SOURCE LICENSE- This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 the program proprietary. To prevent this, we have made it clear Franklin Street, Fifth Floor, Boston, MA 02110-1301 that any patent must be licensed for everyone's...
Page 129
b) You must cause any work that you distribute or publish, c) Accompany it with the information you received as to the that in whole or in part contains or is derived from the offer to distribute corresponding source code. (This alter- Program or any part there of, to be licensed as a whole at native is allowed only for noncommercial distribution...
Page 130
If, as a consequence of a court judgment or allegation any later version published by the Free Software Foundation. patent infringement or for any other reason (not limited to If the program does not specify a version number of this patent issues), conditions are imposed...
Page 131
END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic paper mail. How to apply these terms to your new programs If the program is interactive, make it output a short notice like this when it starts in an interactive mode: If you develop a new program, and you want it to be of the great- est possible use to the public, the best way to achieve this is to Gnomovision...
Page 132
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. To protect each distributor, we want to make it very clear that Franklin Street, Fifth Floor, Boston, 02110-1301 there is no warranty for the free library. Also, if the library is mod- Everyone is permitted to copy and distribute verbatim copies...
Page 133
each copy an appropriate copyright notice and disclaimer Although the Lesser General Public License is Less protective the users' freedom, it does ensure that the user of a program that warranty; keep intact all the notices that refer to this license is linked with the Library has the freedom and the wherewithal to and to the absence of any warranty;...
Page 134
You may opt to apply the terms of the ordinary GNU General the object file is unrestricted, regardless of whether it is legal- Public License instead of this License to a given copy of the ly a derivative work. (Executable containing this object code Library.
Page 135
For an executable, the required form of the "work that uses of the rights granted herein. the library" must include any data and utility programs need- You are not responsible for enforcing compliance by third ed for reproducing the executable from it. However, as a spe- parties with this license.
Page 136
If the library does not specify a license version number_ you To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most may choose any version ever published by the Free Software Foundation.
Page 137
MOZILLA PUBLIC LICENSE Version 1.1 1 •Definitions• code which is described in the source code notice required by exhibit as original code, and which, at the time 1.0.1. "Commercial use" means distribution or otherwise making of its release under this license is not already covered the covered code available to a third party.
Page 138
(c) the licenses granted in this section 2.1 (a) and (b) are You may not offer or impose any terms on any source code effective on the date Initial developer first distributes version that alters or restricts the applicable version original code under the terms of this license.
Page 139
Larger works. (c) Representations. contributor represents that, except as disclosed pursuant You may create a larger work by combining covered code to section 3.4(a) above, contributor believes that contributor's with other code not governed by the terms of this license and distribute the larger work as a single product.
Page 140
Z DISCLAIMER OF WARRANTY. such participant under sections 2.1 (b) and 2.2(b) COVERED CODE IS PROVIDED UNDER THIS LICENSE revoked effective as of the date you first made, used, ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY sold, distributed, or had made, modifications made by KIND,...
Page 141
11. MISCELLANEOUS• EXHIBIT A -Mozilla Public License• This license represents the complete agreement concerning subject matter hereof. If any provision of this license is The contents of this file are subject to the Mozilla Public License held to be unenforceable, such provision shall be reformed Version 1.1 (the "license");...