3. Technical Brief 3.1 GENERAL DESCRIPTION The GW620 supports UMTS-900(Band VIII), UMTS-2100(Band I), GSM-850, GSM-900, GSM-1800, and GSM- 1900 based GSM/GPRS/EDGE/UMTS. All receivers and the UMTS transmitter use the radioOne1Zero-IF architecture to eliminate intermediate frequencies, directly converting signals between RF and baseband.
3. Technical Brief GW620 A generic, high-level functional block diagram of GW620 is shown in Figure 1-1. One antenna collects base station forward link signals and radiates handset reverse link signals. The antenna connects with receive and transmit paths through Sky77521 (FEM, Front End Module,Sky77521 include FEM and GSM PAM). The UMTS receive paths each include an LNA, an RF band-pass filter, and a down converter that translate the signal directly from RF-to-baseband using radioOne ZIF techniques.
3.7.2 WLAN/Bluetooth (LBEH19UNBC) The GW620 device provides the highest level of integration for a mobile wireless system, with integrated IEEE802.11 b/g (MAC/baseband/radio), Bluetooth 2.1. The LBEH19UNBC that is included of BCM4325 solution is supported three kinds of functions. It is the one antenna structure which is supported of WLAN/Bluetooth in 2.4GHz band.
GW620 <Bluetooth> The GW620 provides the Bluetooth 2.1 + EDR specification. The Bluetooth module is the optimal solution for any voice or data application that requires the Bluetooth SIG standard Host Controller Interface (HCI) using a high-speed UART and PCM. The Bluetooth solution has an integrated radio transceiver that has been optimized for 2.4GHz Bluetooth wireless systems.
This equipment supports the European Radio Data System (RDS) and the US Radio Broadcast Data system (RBDS) including all the symbol encoding, block synchronization, and error correction functions. [Figure3.xx.x.x] shows the FM Radio / FM Transmitter system architecture in the GW620. [Figure3.xx.x.x]...
3.14.4.1 Touch Windows Interface GW620 Touch screen is a press sensor with an attached flexible PCB. GW620 4-wire resistive touch pannel. Resistive touch screen use the voltage divider principle to generate voltage that represent X and Y coordinates. LCD connector(CN1) VREG_PROX_2.8V...