Cleaning The Ice Cube Tray; Selecting The Cleaning Position - Miele KFN 37692 iDE Operating And Installation Instructions
Hide thumbs
Also See for KFN 37692 iDE:
- Operating and installation instructions (116 pages) ,
- Operating and installation instructions (112 pages)
Table of Contents
Advertisement
^ Touch the OK sensor to confirm your
selection.
The selected setting is applied. The
symbol in the display for the ice cube
maker ® and the indicator light on the
ice cube maker will flash while the ice
cube maker is being rinsed.
You will hear the ice cube tray rotate so
that it is at an angle.
^ Wait until the ice cube tray has
completed this rotation before
continuing.
The ice cube maker will then switch off.
^ Carefully remove, the ice cube
drawer, which will be full of water.
Empty and clean it.
The ice cube tray cannot be removed
and must be cleaned in situ.
^ Dry the ice cube tray b with a cloth.
When the ice cube maker is switched
back on again, the ice cube tray will
rotate back into the original position.
Cleaning and care
Cleaning the ice cube tray
Clean the ice cube tray,
– before switching off the ice cube
maker for a long time
– regularly, to remove ice and water
residues.
If you have previously selected the
"Rinse the ice cube maker" setting,
(see "Rinsing the ice cube maker"),
the ice cube tray will already be in
the cleaning position.
The ice cube tray b cannot be
removed and must be cleaned in situ.
To clean the tray you need to move it
into the cleaning position.
Selecting the cleaning position
The cleaning position can only be
selected when the ice cube maker is
switched on.
^ Empty the ice cube drawer.
59
Hide quick links:
Advertisement
Table of Contents
