8. Slide the storage drive firmly into the bay until it is firmly connected
9. Reinstall the computer cover
10. Reinstall the battery. See "Replacing the battery" on page 113.
11. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the optical drive
Before you start, print these instructions and read "Important safety information" on page vi.
You computer is shipped with an optical drive installed. If it needs to be repaired, remove it by doing
the following:
To replace the optical drive, do the following:
1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Wait
several minutes to let the computer cool.
2. Remove the battery. See "Replacing the battery" on page 113.
1
. Then tighten the screws
1
, and then reinstall the screws
2
.
.
Chapter 10
2
.
123
Replacing devices