CTRL0/1/2/3 [Figure 1-1] Block diagram of RF part A generic, high-level functional block diagram of GM730/GM735 is shown in Figure 1-1. One antenna collects base station forward link signals and radiates handset reverse link signals. The antenna connects with receive and transmit paths through a SKY77521 (FEM, Front End Module + GSM PAM).
2. The amplitude-modulated (AM) component is applied to the ramping control pin of Polar power amplifier from a DAC within the MSM GM730/GM735 power supply voltages are managed and regulated by the PM7540 Power Management IC. This versatile device integrates all wireless handset power management, general housekeeping, and user interface support functions into a single mixed signal IC.
3. TECHNICAL BRIEF 3.13.4. Touch Interface In GM730/GM735, 4-wire touch screen panel is used for user input method. Two resistive layers make up a 4-wire touch screen panel and are separated by insulating dots. The inside surface of each layer is coated with a transparent metal oxide coating that generates a gradient across each layer when voltage is applied.
3. TECHNICAL BRIEF 3.15 Camera interface GM730/GM735 has two cameras : 5M Pixel CMOS Camera and VGA camera. Below figures shows the 5M camera I/F and ISP Block. 3.15.1 5 Mega Camera Interface CAM_DVDD_1.8V CAM_AVDD_2.8V C103 C104 2.2u 2.2u Rev.1.0...
MDP allows multi downloading up to 16 handsets at the same time. • GM730/GM735 does NOT use LG USB driver but LG SP USB driver. LG SP USB driver is used for only smart phone which is based on Windows Mobile OS.
Page 141
5. Downloading 5.2.3 Choosing image fi les • Select the image folder, where all the image fi les are located, by clicking on the Browse…. , then LG- MDP automatically loads images of the folder accordingly. (The folder name shall be different from that of the folder name in the snapshot. The folder name indi- cates the path where the image fi...